Do I own a middle 2004 or an early 2008 - Airport Express..?

Hiall -
For no specific reason at all, I wish to get a clue, whether I have one of the a/m Airport(s?) Express(es?) - or none of those. Have exploited Apple "Support Site" for hours. Anyone? - Not as stupid as me..? S/No. 6F639*U4T - On a chilly Nov.AM in Stockholm, ._/hans
<Serial Number Edited by Host>

Hi redtop,
If the hosts have not contacted you by email, and I hope this does not cross the boundaries with cyber information, but the entire serial number is not necessary to identify the kind of information you asked about. However, the exact S/N can be used by a skilled hacker to get the Mac address, not to be confused with Macintosh, find your exact location, enter, etc.
So they were trying to protect you, not penalize you. Some very detailed information has to be parsed to only reveal what is necessary.
Hope this helps, and that I did not cause the hosts any grief.

Similar Messages

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
Thank you

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also see:
https://discussions.apple.com/thread/6282459?tstart=0

Problem with my MacBook Pro restarting on it's own repeatedly, ultimately corrupting my HD. (early 2008, running OS 10.6.8)

I brought in my MBP to the Genius Bar a couple of months ago, when this spontaneous-restarting problem had been followed by it not starting at all. They did a diagnostic, and then took it for four days, only to return it to me completely wiped after that time with no explanation, other than that "a file" somewhere on my HD was causing corruption. The Genius told me not to restore any of the files that had been on it previously, and it would be fine.
Well, that makes perfect sense. But, I needed the files to be on my computer, and since I had no idea how to determine which file would be problematic, I decided to just restore from my last backup (from the previous October -- bad, but not the worst scenario) and hope for the best. Well, now this problem seems to be back, and I'm hoping to get some advice for how to help make it go away.
In the past couple months since I restored it, I've had it crash suddenly, causing me to have to hard-boot the machine, and when I run Verify Disk from Disk Utility, it fails and tells me to start-up from my Install disk and run Repairs to fix it. I do the closest thing I can to that, which is starting up my MBP in Target disk mode, and connect it to an iMac which runs Disk Repair on it, and then it appears to be fine, until the next time it crashes.
Now, the probem has progressed to suddenly restarting with no warning and no crash, mostly right after I turn it on, and then doing so a number of times in a row. The console message (I think?) generated from this event is as follows:
5/7/14 11:03:13 PM          airportd[20]          [most time: (2.638319) _scan] trace: <CFArray 0x10101c880 [0x1005f7ee0]>{type = immutable, count = 56, values = (
          0 : <CFString 0x10003ccd0 [0x1005f7ee0]>{contents = "pref_netwk_AJ"}
          1 : <CFString 0x10003cb90 [0x1005f7ee0]>{contents = "scan non-DFS channels"}
          2 : <CFString 0x1012118e0 [0x1005f7ee0]>{contents = "(0.977479) _scan"}
          3 : <CFString 0x101210a30 [0x1005f7ee0]>{contents = "(0.000012) _lookup"}
          4 : <CFString 0x10003cbf0 [0x1005f7ee0]>{contents = "scan DFS channels"}
          5 : <CFString 0x1010185a0 [0x1005f7ee0]>{contents = "(1.809528) _scan"}
          6 : <CFString 0x10100b500 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          7 : <CFString 0x10003cc10 [0x1005f7ee0]>{contents = "scan all channels"}
          8 : <CFString 0x101028dc0 [0x1005f7ee0]>{contents = "(2.638319) _scan"}
          9 : <CFString 0x1010264a0 [0x1005f7ee0]>{contents = "(0.000010) _lookup"}
          10 : <CFString 0x101211b10 [0x1005f7ee0]>{contents = "(0.284620) _keychain"}
          11 : <CFString 0x10120d460 [0x1005f7ee0]>{contents = "(0.000003) _lookup"}
          12 : <CFString 0x101217b50 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          13 : <CFString 0x101217b80 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          14 : <CFString 0x101211850 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          15 : <CFString 0x101217e50 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          16 : <CFString 0x101217e80 [0x1005f7ee0]>{contents = "(0.000003) _lookup"}
          17 : <CFString 0x101217eb0 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          18 : <CFString 0x101217ee0 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          19 : <CFString 0x101217f10 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          20 : <CFString 0x101217fd0 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          21 : <CFString 0x10103fb10 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          22 : <CFString 0x10103fb80 [0x1005f7ee0]>{contents = "(0.000004) _lookup"}
          23 : <CFString 0x101027190 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          24 : <CFString 0x10102fc10 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          25 : <CFString 0x10103d490 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          26 : <CFString 0x10103db70 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          27 : <CFString 0x101033170 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          28 : <CFString 0x10103ddb0 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          29 : <CFString 0x1010428a0 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          30 : <CFString 0x1010470b0 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          31 : <CFString 0x101040280 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          32 : <CFString 0x1010403c0 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          33 : <CFString 0x101040870 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          34 : <CFString 0x101042b40 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          35 : <CFString 0x101043470 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          36 : <CFString 0x101042840 [0x1005f7ee0]>{contents = "(0.000013) _lookup"}
          37 : <CFString 0x101029fb0 [0x1005f7ee0]>{contents = "(0.067594) _keychain"}
          38 : <CFString 0x10101e260 [0x1005f7ee0]>{contents = "(0.000003) _lookup"}
          39 : <CFString 0x1010434d0 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          40 : <CFString 0x101035b00 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          41 : <CFString 0x10102d7e0 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          42 : <CFString 0x10102a7c0 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          43 : <CFString 0x101029840 [0x1005f7ee0]>{contents = "(0.000003) _lookup"}
          44 : <CFString 0x10102df40 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          45 : <CFString 0x10104a970 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          46 : <CFString 0x10102b390 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          47 : <CFString 0x101218420 [0x1005f7ee0]>{contents = "(0.000002) _lookup"}
          48 : <CFString 0x1010324e0 [0x1005f7ee0]>{contents = "(0.000005) _lookup"}
          49 : <CFString 0x101032540 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          50 : <CFString 0x10102acd0 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          51 : <CFString 0x10104ce70 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          52 : <CFString 0x10102f420 [0x1005f7ee0]>{contents = "(0.000001) _lookup"}
          53 : <CFString 0x10102bd30 [0x1005f7ee0]>{contents = "(0.000012) _lookup"}
          54 : <CFString 0x101228960 [0x1005f7ee0]>{contents = "(0.026381) _keychain"}
          55 : <CFString 0x1010307e0 [0x1005f7ee0]>{contents = "(1.446801) _association"}
com.apple.message.domain: com.apple.airport.autojoin.summary
com.apple.message.signature: AutoJoinSuccess
com.apple.message.result: success
com.apple.message.value: 7.341770
com.apple.message.value2: 51.000000
com.apple.message.value3: 43.000000
com.apple.message.uuid: 8C58D61F-D7E3-4FE5-B848-48CEEC5CDB75
The panic report looks like this:
Interval Since Last Panic Report: 8448254 sec
Panics Since Last Report:          5
Anonymous UUID:                    F1FA5387-8149-4E40-8F76-A901608BDB0E
Wed May 7 23:03:09 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800034cb6e, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000001003f47d0, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x0000000000000cf4, RBX: 0x00000001003f4758, RCX: 0x0000000000000fff, RDX: 0x000000000000c1cb
RSP: 0xffffff805fe0b940, RBP: 0xffffff805fe0b980, RSI: 0xffffff804b334008, RDI: 0xffffff800ba714c0
R8: 0x00000000000070c0, R9: 0x0000000000000001, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000036f2fbcd, R13: 0x00000000000070c0, R14: 0xffffff800088af60, R15: 0x000000000000bb01
RFL: 0x0000000000010202, RIP: 0xffffff800034cb6e, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805fe0b5e0 : 0xffffff8000204d15
0xffffff805fe0b6e0 : 0xffffff80002d1208
0xffffff805fe0b830 :
With absolutely no ability to read these kinds of things, I did notice that several of these messages in the console started with 'airportd[20]', or somethign like that. This makes me wonder if it could be a bad Airport card?
If anybody has any ideas on how this could be happening, I'd sure appreciate it. I keep taking evasive maneuvers (i.e. Disk Repair from a different machine), but the problem keeps coming back, sooner and sooner. I don't trust the Genius Bar to help me understand this, so I'm leaving it up to you folks.
I thank you in advance.

The report indicates an internal hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

If i already own a mac laptop and apple tv do i need to purchase the airport express as well?

we already own a macbook, ipad, apple tv and iphone...do we need to purchase airport express as another item?

If you already have a router, then AEX is unnecessary, unless:
You like to stream music from your macbook to your home theater without running your apple tv or tv, period - AEX has an optical audio line out amd can stream lossless signal from iTunes.
Your iPad won't be able to do that because it will require Apple Tv in the middle whcih is, I assume, already connected to your home theater anyway.
or
you want to have other speakers around the house or outdoors to play music from your macbook too
I use AEX to play in my garage, plus it extends the coverage of my WIFI a bit furter around that side of the house.

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

How can I use Airport Express (2004 version) ethernet port?

I am using a Time Capsule to access the internet. Now I would like to use my old AE to "root" that internet connection via the ethernet port to my WD HD TV Live (or Notebook w/o wifi).
I know that it is possible with the newer airport express version coz a friend has it setup. But I could not make it work with the AE 2004.
The latest available firmware is 6.5.3 while on the AE 2008 it is 7.5.2
Any suggestions?

dirk2gently, welcome to the discussion area!
Unfortunately, your older version of the AirPort Express does not have the capability to "extend a wireless network", so you'll need to use the 802.11n version of the AirPort Express to do what you want to do.

I own a MacBook Pro 15-inch early 2011 and I want to upgrade the ram to 16 or 8gb is it ok to use a corsair brand memory?

I own a MacBook Pro 15-inch early 2011 and I want to upgrade the ram to 16 or 8gb is it ok to use a corsair brand memory?

Welcome to Apple Support Communities
Of course. Corsair RAM is compatible with your Mac and the Early 2011 MacBook Pro supports 16 GB of memory. Make sure you buy the correct memory for your MacBook Pro. See > http://www.corsair.com/us/memory-by-product-family/mac-memory-upgrades.html

Where do I find my own Airport Express Network password?

Hi:
A couple of years ago I set up my Airport Express so's to get wireless access. It's worked flawlessly for all this time. Now I would like to enable one of my friends to access the web through her own laptop, but her machine prompts me for a password when it finds the network.
I don't remember it and, for a non-techy like me, doing anything with my internet settings makes me feel like a bomb disposal officer. I get kind of nervous.
Could someone please point me in the right direction.
Thanks!

I would open the airport express utility, locate the settings you had previously made when you set up the original wireless network. Then, since you cannot remember your password, reset it, writing it down so that you can use it on your friend's machine. The one big if is do you remember the password for your airport express? (not the network password) If not that would require a complete reset of the airport express and to set it back up. Dont know if that is something you would want to attempt. The manual of the airport express helps, http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf
I hope this helps,
Travelrn
ibook Mac OS X (10.3.9)

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

HT203172 I have quite a few questions .. i own a Macbook Pro 13 inch early 2011 ..and these are the list of problems i have

1) My Sd card reader stopped woking unexpectedly ...( i do need help on this )
2)repair permissions does not work properly ,i mean there are a lot of problems that occur to be repaired but once i run the verify permissions again ,the problems do occur again .. ... i checked the link for the problems that can be ignored but mine are different ,Any solutions
This is what shows up
Verifying permissions for “Macintosh HD”
Permissions differ on “System/Library/CoreServices/Menu Extras/Displays.menu”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/MonitorPanels/Arrange.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/MonitorPanels/Display.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/MonitorPanels/Profile.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pl.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt_PT.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_TW.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_CN.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/sv.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ru.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/no.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ko.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/fi.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/da.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Dutch.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Italian.lp roj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/French.lpr oj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/German.lpr oj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Japanese.l proj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/English.lp roj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Permissions verification complete
Repairing permissions for “Macintosh HD”
Permissions differ on “System/Library/CoreServices/Menu Extras/Displays.menu”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Repaired “System/Library/CoreServices/Menu Extras/Displays.menu”
Permissions differ on “System/Library/MonitorPanels/Arrange.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Repaired “System/Library/MonitorPanels/Arrange.monitorPanel”
Permissions differ on “System/Library/MonitorPanels/Display.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Repaired “System/Library/MonitorPanels/Display.monitorPanel”
Permissions differ on “System/Library/MonitorPanels/Profile.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Repaired “System/Library/MonitorPanels/Profile.monitorPanel”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Repaired “System/Library/PreferencePanes/Displays.prefPane”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pl.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pl.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt_PT.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt_PT.lpro j/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_TW.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_TW.lpro j/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_CN.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_CN.lpro j/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/sv.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/sv.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ru.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ru.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/no.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/no.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ko.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ko.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/fi.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/fi.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/da.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/da.lproj/D isplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Dutch.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Dutch.lpro j/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Italian.lp roj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Italian.lp roj/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/French.lpr oj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/French.lpr oj/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/German.lpr oj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/German.lpr oj/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Japanese.l proj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Japanese.l proj/DisplaysPref.nib”
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/English.lp roj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rw-r--r-- .
Repaired “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/English.lp roj/DisplaysPref.nib”
Permissions repair complete
Verifying permissions for “Macintosh HD”
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/Dutch.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/English.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/French.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/German.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/Italian.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/Japanese.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/da.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/fi.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/ko.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/no.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/pl.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/pt.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/pt_PT.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/ru.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/sv.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/zh_CN.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/zh_TW.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .
Permissions differ on “System/Library/CoreServices/Menu Extras/Displays.menu”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/MonitorPanels/Arrange.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/MonitorPanels/Display.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/MonitorPanels/Profile.monitorPanel”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane”; should be drwxr-xr-x ; they are lrwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pl.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt_PT.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_TW.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/zh_CN.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/pt.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/sv.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ru.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/no.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/ko.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/fi.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/da.lproj/D isplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Dutch.lpro j/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Italian.lp roj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/French.lpr oj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/German.lpr oj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/Japanese.l proj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “System/Library/PreferencePanes/Displays.prefPane/Contents/Resources/English.lp roj/DisplaysPref.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
Permissions verification complete
This is what i mean,any solution will be appreciated greatly , I am a noob here so please do bear with me ... any help is greatly appreciated...

Thanks for your replies ....really appreciated ... Kindly do help me over the SD card issue .. i had installed tuxera NTFS 3g ...which seems to have had created the problems for the mounting issue

Do I need to plug my airport express into a modem to use it as its own router?

I want to use my airport express as a router. Do I need to plug it into a modem to do this or can I do this without pluging anything into it.

The AirPort Express is a wireless router only, with no modem on board.
You will need to connect the Express to a broadband modem if you want to be able to access the Internet.

I am looking to set up the airport express in my room to be linked off the others, but have its own password, is this possible? if so what do i do?

i am convinced that i am able to set up my airport express in my room to be linked off the base station (airport extreme) wirelessly and have a separate password and name, such as for my room tkbowers room, instead of tkbowers wifi

No. not when you extend.. when you extend it is the same wireless all the way through.. same name.. same password..
The base station name is different but how relevant is that??

Owned an iMac for 5 years - have no idea what my password is for my AirPort Express which I set up about 3 years ago My wife has just purchased an iPad 2 and it is asking for my forgotten password - how do I retrieve it ?

How do I recover my password set up when I added AirPort Express to my iMmac a few years ago.. My wife has just purchased an iPad and it is asking for that "forgotten" password to make the Wi Fi connection ?

From the airport express user manual:
If You Forgot Your Network or AirPort Express Password
You can clear the AirPort network or AirPort Express password by resetting AirPort
Express.
To reset your password:
1 Use the end of a straightened paper clip to press and hold the reset button for one
second.
2 Select your AirPort network.
On a Macintosh computer:
=> Use the AirPort status menu in the menu bar to select the network created by AirPort
Express (the network name does not change).
3 Open AirPort Utility, located in the Utilities folder in the Applications folder on a
Macintosh
4 Select your AirPort Express and click Configure.
5 In the dialog that appears, make the following changes:
Â Reset the AirPort Express password.
Â Turn on encryption to activate password protection for your AirPort network. If you
turn on encryption, enter a new password for your AirPort network.
6 Click OK.
AirPort Express restarts to load the new settings

Do I own a middle 2004 or an early 2008 - Airport Express..?

Similar Messages

Maybe you are looking for