Do I really HAVE to use a wired headset to record with Garageband? Is it 2015?

I'm trying to record on my iPad with Garage band, using a Bluetooth headset.
As many of you already know, there is quite enough being plugged in, balanced on laps, or set on tables while
recording on an iPad. I have a perfectly good bluetooth headset to relieve some of the stresses of recording on
a mobile interface, however it just isn't supported by this app? The app is very well aware of this, so it was not
overlooked, and I certainly paid money for the app (and the ipad), so why am I limited?
Not only would it be nice to hear a legit answer, or even possibly some feedback on how I can bypass this,
but it would also be great if you would just go ahead and update garageband to support bluetooth headsets.
-Freddy

After re-reading the prompt, I see that there may be some kind of delay, but honestly that would just require me to move the track to fit, it's not that big of a deal.
Freddy

Similar Messages

  • When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

    when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
    In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
    Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
    Any ideas - solutions - comments please?

    I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
    I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

  • How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

    How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

    The devices are not designed for transfer of that kind.  Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

  • I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

    I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

    Eric,
    Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
    The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
    I'm trying to record the sound from the DVD not rip the track.
    When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
    I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

  • How can I record with GarageBand 1.3 in the background using other app?

    How can I record with GarageBand 1.3 in the background using other app?
    I use iPad 2 with iOS 6 and GarageBand v1.3.
    I'd like to play an other app like Sunrizer synth while the GarageBand is recording in the background in a track.
    By now I can do it only using the build-in mic of iPad, but this is not the point.
    Can I record other apps in a GarageBand track?
    Thanks a lot for your time.

    I suspect you are probably correct about the reasoning, although there are already a myriad of ways to do that.
    Don't get me wrong - I never said I like this. But it is consistent with other Apple applications, that are similar restrictive; you cannot take a screenshot, when dvd-player is running for example.
    That are the moments, when I am glad that MacOS X is a unix system under the hood

  • I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

    I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

    See these threads for some possible solutions:
    Bluetooth and 10.7
    Bluetooth speaker error

  • How to use both wired and wireless connection with static addresses

    Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
    I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
    The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

    If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
    If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
    On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

  • Wired Headsets not working with Galaxy S5

    I have a number of wired 2.5mm headsets that I use with other Android based smart phones (Droid 4 most recently). I use multiple 2.5mm to 3.5mm adapters, and they have all working fine for all of them.
    When I try to use any of my wired headsets + adapters with my Samsung Galaxy S5 I hear the audio from the headset, but other people don't hear my voice from the headset. When I connect the headset it shows as "earphones" everytime, and indeed does work fine as a earphone, but the microphone does not work. I'm wondering if there is a setting I need to change so the S5 sees my wired headset as a device with a microphone and not just headphones.
    Does anyone have any ideas on this?

    I found out that the wiring of the contacts is different for some phones.  If the earbuds say compatible with iPhone then the tip/ring/sleeve contacts are swapped in relation to the Galaxy S5's contacts.  See: Phone connector (audio) - Wikipedia, the free encyclopedia

  • Using Hercules DJ Console to record via GarageBand

    Hi Guys,
    I'm planning on buying the Hercules DJ console found in the apple store. I'm not buying it for its DJ features but merely to its wide range of inputs and outputs while having audio and midi inputs coming out of one USB plug. The DJ tool would be additional to me.
    I have one question, will garageband recognize the hardware for recording input? Meaning, can I record audio and midi in GarageBand through the Hercules as a sound card????
    Any input from anyone is welcome. Has anyone tried it??

    Thanks for your attention, I really appreciate it.
    Well I do plan on using the DJaying effects and mixing things together as well as having an audio and midi interface to record my music from my keyboards through Garage Band and later through Logic Express.
    So I actually both features of this console. That's why I bought it. It just freezes several times when I use it as a DJ console with its bundle software "Traktor DJ Studio". It freezes on both my iMac and my Mac Book Pro. I tried contacting the software support but they are not really helpful.
    Any clues?
    Carol

  • How to use old "Apple Loops for Soundtrack" with Garageband

    Since Soundtrack (was part of FinalCut Express HD) doesn't work anymore (since some ProKit framework update) and was not part of the FinalCut Express 4 upgrade I used Garageband for sound creation and editing. But I missed some good loops from the old Soundtrack.
    The Apple Loops for Soundtrack were still sitting on my harddisk but Garageband didn't recognize them in the Loop-Browser. Looking at the structure I found the Search Index files (/Library/Audio/Apple Loop Index/). I have two there, one for Garageband and another for iLife Sound Effects. Both are interpreted by Garageband. But no third for the old Soundtrack Loops. So I had a look at the Sound Loops installer DVD from FinalCut HD and there I found a similar structur and copied the Index file to the location of the two indexes mentioned above. I left the Loops for Soundtrack where they are (also could edit the index file for new locations, but that's a 7.5MB text file) and now Garageband knows their location and also lists the loops at the right categories inside the Loop-Browser.
    Maybe that helps someone, even if I didn't find a topic about it here.

    Ah.. ok, then never mind. Just didn't find any information about how to use the old soundtrack loops with garageband and so I did some thinking on my own. And if it works that easy, the better it is

  • Can DNSServer Powershell module cmdlets be used to add a host record with a blank name? i.e. "(same as parent folder)"

    Giving Add-DnsServerResourceRecordA a blank name yields an error (basically saying that the 'Name' parameter cannot be null or empty). In DNS Manager (dnsmgmt.msc)
    adding such a host record yields a record with the same name as the parent folder, denoted by "(same as parent folder)" in the Name column.
    Is there some flag I can pass to Add-DnsServerResourceRecordA to achieve the latter functionality? Is there some other way to achieve this in Powershell?
    I currently have the line of PS below, and if $name="" I get the error.
    Add-DnsServerResourceRecordA -IPv4Address $ip -ZoneName $zone -Name $name -ComputerName $dns

    Thanks, Calin!
    This could be added as an example here: http://technet.microsoft.com/en-us/library/jj649925.aspx
    Now that I see your answer Example 6 looks like it was supposed to use -Name "." but part of the line is missing so it just looks broken instead.

  • Want to use "LINE-IN" but keeps recording with "BUILT-IN MICROPHONE"?

    Set up Mac>System Preferences>Sound and choose LINE-IN......check!
    Set up Audio MIDI setup default to Built-in Line-in, NOT microphone...check??
    okay.. i've been trying to record with a microphone that i have.
    i did everything i could to NOT record with the built-in mic.
    hasnt succeeded. I do not know what to do..
    I see other ppl with the same problem:
    http://discussions.apple.com/thread.jspa?messageID=6418401
    http://logicprohelp.com/viewtopic.php?p=19933&sid=cc5a97a30c63560ba8793515ecc5c1 91
    No real helpful answer.

    If I am not wrong, you need data from SQL tables in form of
    XML. Then you can get that straight from SQL by using FOR XML
    clause. FOR XML modes can be of 3 types RAW, AUTO or EXPLICIT. You
    can use the mode as per your need.
    For more information, please visit the link below:
    http://msdn2.microsoft.com/en-us/library/ms345137.aspx
    Thanks

  • Using a 4 track recorde with Garageband

    I am new to this so forgive me if this sounds stupid.
    I have a Yamaha, Mini-disc 4-track recorder. It has MIDI in/out and I have a MIDIsport 1x1 MIDI to USB cable. Is there anyway to send the MIDI signal to garage band or what should I do. I am doing vocal recording only and would like to use My MD 4-tr. recorder. Can these two be used together or is my attempt futile. Thanks

    MIDI is not audio, so no.
    If your Mac has a Line In, you could use a Line-Out from the 1/4 track recorder which will let you record a stereo track at a time in GarageBand.
    --HangTime [Will Compute for Food] B-)>

  • Is it really nescessary to use 3rd party Anti Virus/Spyware with FF?

    I use FF browser and a 3rd party Antivirus/spyware program.
    Is the 3rd party program really necessary or does FF have it built in? The 3rd party seems to slow down my startup.
    S.

    Absolutely necessary.
    Unfortunately, a slight slowdown is the price you pay for protection. Post on the forum of the security application that you are using for assistance and advice concerning your problem.
    Firefox does warn you when you try to go to '''''known''''' malware or phishing sites but does not replace a good security application.
    *See --> https://www.mozilla.org/en-US/firefox/phishing-protection/
    *'''''Sample''''' warning screens:
    **http://www.mozilla.com/firefox/its-a-trap.html
    **http://www.mozilla.com/firefox/its-an-attack.html
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Maybe you are looking for