Do i require the adobe player to be embedded in the source code while designing a site?

In my website and I want to use a flash file inside with some animation in place of a slider with static images. I am confused if I am required to add a flash player on the website in its source code.
Is there a way that I can use the flash player or upload the flash player to my website so when a user visits my site he does not get an error stating flash player is needed.
Any help is appreciated.
Thank sam

You're welcome. Thanks for the rating.
The Configuration Guide section on clustering explains it thus:
"IPS module—There is no configuration sync or state sharing between IPS modules. Some IPS signatures require IPS to keep the state across multiple connections. For example, the port scanning signature is used when the IPS module detects that someone is opening many connections to one server but with different ports. In clustering, those connections will be balanced between multiple ASA devices, each of which has its own IPS module. Because these IPS modules do not share state information, the cluster may not be able to detect port scanning as a result."
So, yes you can use the  IPS module in each member but the effectiveness will be reduced a good bit. Given the additional cost you will pay for those, plus the fact that Cisco traditional IPS may well migrate to the superior SourceFire technology over the coming year or two (speculation on my part) I would not think that would be a good strategic move.

Similar Messages

  • How to get the source code in PAR file

    Hi All,
    I used the PAR migration tool to migrate from PAR to EAR file. When I imported the EAR into NWDS 7.3, I was just able to see the structure and jsp files and could not find the java source code files. I would requires the java source code to make modifications so that deprecated APIs can be replaced and to also make the code compatible with JDK 1.6.
    I think the original 7.0 PAR file itself does not contain the source code. I decided to use the "Include source code" option when exporting the 7.0 PAR.
    I have the portal application DC project in my NWDS 7.0. However, when I try to export the PAR file using Export --> PAR File -- > Next... I am unable to select any project from the list. The list appears blank with disabled Next & Finish buttons.
    I also noticed that in the portal DC application structure, there is a .sda file under /gen/default/deploy. Also there is no PAR folder under /gen/default/public.
    How do I include the source in the PAR file so that I can edit the same after migrating to EAR format ?
    Regards,
    Melwyn

    DC and PAR/EAR stuff are different formats, SC/DC is an archive type used by NWDI, if I got it right.
    How do I go about generating the PAR file (with source) ?
    In fact through including the seources while creating the PAR/EAR in NWDS, but: no need to do that, you can also depack SDA (rename it to zip). If you wanna just see the Java sources you will find them there, otherwise decompile as Vijay already sad.
    cheers

  • How to get the source code of  "com.sap.caf.eu.gp.example.tiimeoff.wd.creat

    Hi Frendz..
    I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
    I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
    Thanks in Advance
    Regards
    Rajesh

    Hi,
    check [this|Re: Source of Time-off Request Project].
    Regards,
    Naga

  • How to find the source code of com.sap.caf.eu.gp.example.tiimeoff.wd.create

    Hi Frendz..
    I want to know how we can build a callable obj which have a two buttons those  r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
    I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
    Thanks in Advance
    Regards
    Rajesh

    not answered

  • How to retrieve the source code navigation sidebar

    Hi,
    I'm trying to build a site following the tutorials on the dreamweaver software.  I get in the part where i have to do the columns but i lost the navigation sidebar where the source code tab and the check_cs5.css are under the index.html tab, and have to use this one to be able to continue with the setup.  I would like to know if it possible to retrieve this side bar and how?  Or what to do to fix it, especially i'm far away for this step, do I have to start over?  Please, I need an ASAP answer.
    Thanks,

    I get in the part where i have to do the columns but i lost the
    navigation sidebar where the source code tab and the check_cs5.css are
    under the index.html tab, and have to use this one to be able to
    continue with the setup.  I would like to know if it possible to
    retrieve this side bar and how?
    I'm assuming you're doing this tutorial by David Powers:
    http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt2.html
    DW Menu > Window > Files or CSS Styles.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Where to get the source code of the owa_cookie.send procedure?

    I want to know where you get the source code of the owa_cookie.send procedure? I can only get the header of this package from ...\RDBMS\ADMIN\pubcook.sql. Could you paste the whole source code here and then I can modify it to set the 'httponly' attribute? I also have a problem that after changing the package, how to use the package I changed? Does it still a system package here? Or it has been changed to an user-defined package in database and I need to execute the package on the database for the web server?
    Thank you!

    Hi Arun,
    I am unable to see the pcui_gp components in the DTR ,I require this in order to get the source code of one of its component.
    Can you please tell me the step by step procedure getting those pcui_gp components from J2ee engine to the  dtr or  NWDI.
    If there are any documents on pcui_gp components exclusively please do forward to my mail id [email protected]
    Thansk and Regards,
    Anand.

  • How to search a term in the source code

    Hello ,
       How to search a term in the source code. I have selection screen , on which a program name will be given and term to search. How can I proceed to know whether this term is available in the source code of the program
    Thanks and regards,
    Satya

    Hi naga,
    1. one option is to retrive the source code of the requried program,
       into internal table using the syntax READ REPORT (just see f1 help on it)
    READ REPORT prog INTO itab [MAXIMUM WIDTH INTO wid].
    2. Then we can loop / search the internal table for the required term.
    regards,
    amit m.

  • Where to  find the pcui_gp  components ,How to get the source code of those

    Hi All,
    Can anybody tell the exact location wher the pcui_gp components will be stored if they are  not appearing.
    And another question is how to get the source code of the pcui_gp for customization.
    anybody working on these compoents please help me.
    answers will be rewarded.
    thanks and regards,
    anand

    Hi Arun,
    I am unable to see the pcui_gp components in the DTR ,I require this in order to get the source code of one of its component.
    Can you please tell me the step by step procedure getting those pcui_gp components from J2ee engine to the  dtr or  NWDI.
    If there are any documents on pcui_gp components exclusively please do forward to my mail id [email protected]
    Thansk and Regards,
    Anand.

  • How to See and Change the Source Code of Spawned Concurrent Program.

    Hello Team,
    There is one requirement in which we have to add some condition in the Concurrent Program.But the Type of that concurrent Program is ,"Spawned ".
    Please suggest me , how can i check the Source code for this type of Concurrent Program and how can i make the changes to satisfy the requirement.
    Thanks & Regards

    There is one requirement in which we have to add some condition in the Concurrent Program.But the Type of that concurrent Program is ,"Spawned ".
    Please suggest me , how can i check the Source code for this type of Concurrent Program and how can i make the changes to satisfy the requirement.Please see old threads, it should answer your question -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Spawned+AND+Concurrent+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How can one encrypt the source code of a given web page(html, jsp, etc.) ?

    Good Day! I'm just having a hard time of thinking how to encrypt the source code of a given web page(html, jsp, etc.) without affecting how it is previewed in an Internet Browser. What I plan is to disable the capabilities of some malicious Internet users of copying the source codes of my web pages by using the "View Source" option of Internet Explorer and the equivalent function in Netscape Navigator. Please somebody help me in this matter (I'm planning to use an IDEA algorithm using JCE)....
    It would be big help if a running code is supplied.
    Thank you very much in advance.
    God Bless!!!
    - Jonathan Untalan([email protected])

    don't know theses softs. What i know about encrypted web pages, is that you need a secure socket connection (https).
    Your web page will be ciphered, send to the user, and decipher by the browser with the signature file associated to your https connexion.
    It isn't possible to encrypt your page directly, and then decrypt them when requested.
    For the download time, only the server is responsible for this.
    if it is overloaded, then it will slow down its upload.
    Maybe you use some encryption method that require a lot of CPU time.
    For summary : you can only cipher the pipe transport, but not the transported pages.
    Good luck in your search.

  • Does a method exist in order to take a labview executible and derive the source code VIs used to create it?

    Has there been any type of methodology for taking a labview executible and extrapolating the source code VIs used for creating the VI?
    Solved!
    Go to Solution.

    Officially they are embeded in the exe in an undocumented way. So you can't easily get at them. But you can always attach a remote debug session and get into the diagrams that way. That is if the diagrams were not removed during the build, which requires a conscious and extra action by the person to remove the according check mark in the build options of the project. So by default all diagrams are totally gone and are definitely not possible to get back from the executable, unless as smercurio has mentioned your name might be Carnac
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How do I see the source code in a Digital Edition doc?

    First let me say that as an author, I'm a huGe fan of DRM and anything else that protects my ability to feed my family by allowing me to control who can sell my copyrighted works.
    But.....I'm creating a book that I hope will eventually be accessed through Adobe Digital Editions and I would like to see what the books look like from the backside. Usually I go into Sigil to have a look at the coding of books whose layout I like.... but because of DRM I can't see the source code in any of the books in my Digital Library.  So, is there a way to take a peek at the coding of a Digital Library book? I don't care about the content, only how the CSS and HTML are done.
    Thanks
    RS

    You're welcome

  • Get the source code of CO -  WDCOApproval & NotificationCOwithAttachment

    HI, SDN Experts.
    I am trying to extend the functionality of the following standard GP Callable Objects, which are type of Web Dynpro applications (implementing GP interface) and library class:
    Text: Approval callable object
    Description: Approve or reject input data of the callable object
    Web Dynpro Component: com.sap.caf.eu.gp.ui.wdco.approval.WDCOApproval
    Web Dynpro Application: sap.com/cafeugpuiwdco
    And:
    Container Type:   Library
    Container:   cafeugp~actions
    Implementation Class Name: 
    Implementation Name: Notification
    Implementation Description: Sends a notification to process contributors
    Where can I get the source code or the DC of these two components?
    Thanks for advise,
    KC

    AFAIK, you cannot get the source code of these DCs as they are a part of pre-delivered SAP standard content. However, you can find the WAR file corresponding to the DC that contains the WDCOApproval component under:
    \usr\sap\<Inst Name>\J<Inst No>\j2ee\cluster\apps\sap.com\cafeugpuiwdco\servlet_jsp\webdynpro\resources\sap.com\cafeugpuiwdco
    if you are using CE 7.1
    If required you may de-compile the class files corresponding to WDCOApprovalView.java, WDCOApproval.java, WDCOApprovalInterfaceCfg.java, WebDynproCOInterfaceView.java, WDCOApprovalInterface.java to understand how this component works.

  • Where does the source code of linux reside in arch

    Just wonder where is the source code. In freebsd, all the source code is in /usr/src, does arch have that directory? or do I need to install something to get source code?

    tomk wrote:Arch does not install the source code for anything. Under /usr/src/linux-2.6.17-ARCH, you will find the kernel headers required for building other apps, but apart from that, if you want the source code for the kernel or any of the apps, you need to get it from the relevant website/ftp server/etc e.g. kernel.org for kernel source.
    no, those headers in there are for kernel modules only. the headers for applications are a sanitised copy based on 2.6.12 and exist in /usr/include/linux.
    As for the source to Arch packages, we have something similar to fbsd's ports system (ports is on fbsd isnt it or am I wrong), it's called abs:
    http://wiki.archlinux.org/index.php/ABS#The_ABS_tree

  • Needed: A bit more info on the source code structure

    Hi,
    I've downloaded the source code zip file and would like to link to BlazeDS's source code from a Flex Builder project, so that I can step through it in the debugger.
    As far as I can see the source code is split up in multiple sub-directories under the modules directory. It would be nice if there was a single folder that included all BlazeDS source, so that I wouldn't have to link to multiple folders in my project.
    Or, at least, some explanation in a read-me file explaining what I need to link to.
    Am I missing something? If so, where?
    Also, an explanation of the difference between 'java' and 'java15' folders would be helpful.
    Thanks,
    Douglas

    > Could you explain to me why flex.messaging.MessageBroker only exists in
    > /core/src/java/ and not in /core/src/java15/?
    Hi Douglas,
    The classes are merged together in to a single jar file. The java15 code is
    mainly code that needs to be compiled with the compiler in 1.5 mode. This
    is left over from before we released BlazeDS and supported Java 1.4. We
    expect to 'fix' all this moving forward and require Java 5 SDK and JVM as a
    minimum. We just haven't done that yet.
    In an IDE you can just ignore this and set the JVM level to be 1.5 and
    include both the java and java15 directories as source. The Eclipse
    projects (and IntelliJ IDEA projects) we provide should already take care of
    this for you. It shouldn't be too hard to do in any other Java IDE either.
    Tom Jordahl
    Adobe

Maybe you are looking for