Do i required to generate XML file for JAVA upgrade.

Dear frnds,
I am in process of upgrading EP 6.0 to EP 7.0 EHP1 for SR1.
I am following document Upgrade Guide SAP NetWeaver 7.0 Java Including Enhancement Package 1
As of media list guide i have selected .
51036889_1/2 for UPG MASTER BS7 SR1
51037093_1,2,3 for NW 7.0 EHP1 SR1 java SW components 1/2
51036767_2 for BS7 UC kernel 7.01 AIX 64 bit.
Well, i have a query here when i am doing upgrade on ABAP stack ECC 5.0 to ECC 6.0 EHP4 SR1 i alowed to select required compoenets , which eventually will generate mea XML file in Solution manager system.
But, When i have planned to UPGRADE only JAVA Stack for EP 6.0 to EP 7.0 EHP1 SR1. When i selected my system in Solution manager i am not getting option for UPGRADE.
If it is so how about my XML file during JAVA upgrade is not mandatory or not .. Please advice me on this.
regards,
rahul

Hi Rahul,
Yes, for Java Upgrade to EHP1 you need xml file. Normally you should be able to download xml file from solution manager from MOPZ.
If you are not able to download it from solman then you can also download the xml file from service market place and this is only for EHP1. Follow below procedure to download xml file from SMP for EHP1:
Go to https://websmp205.sap-ag.de/sp-stacks
Click on SP Stack download.
Select SP Stack Netweaver 7.0 (New window will open)
Then on New Window Select Source Stack, Target Stack and usgae type. Then Click Next.
On Next screen Select Kernel and IGS. Then Go Next.
On that screen you will get a option to Save as File. Then save as xml.
This is the xml file that you can use in upgrade.
For EHP4 you cannot download it from service market place.
Thanks
Sunny

Similar Messages

Generate XML file for payroll result

Hi,
I tried to generate XML file for chinese payroll result by t-code: pu12, but i can not find the interface format for china payroll(here is format for other country vesion like international, france...). How can i generate xml file for chinese payroll result. DO i need to create a format type? Is there any other way? thank you in advance.

Coming back to my question is it really possible to generate bigger XML on 9i.
Sure. But not in one go.
I would use SQL/XML functions instead and paginate the result set so that each CLOB chunk doesn't exceed 4GB (or less). Each chunk could then be appended to a file using UTL_FILE.
Alternatively, as Oracle 9i supports parallel pipelined functions, you could also imagine doing the job in parallel using automatic data partitioning on an input ref cursor.
That would require some postprocessing steps to rebuild the entire file from the different chunks though.
See : Pipelined and Parallel Table Functions

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

The nicest way to generate xml-files by Java???

I have to generate huge and quite complex xml files by Java. I have to fetch the data from a Oracle database. What I really don't know is a proper and reliable way to this? I could of course create a String and concatenate all the tags, attributes and data but it doesn't feel right. I guess this is a quite common task and there are many established ways to this by Java. My question is what is the best way to this? What is your suggestion?
Thank you for any clues...

Hi,
Since you have access to the database, I think one of the best way is to create stored procedures that will generate those files for you (using SQL/XML functions preferably) and return the content to the Java caller.

MOPZ error while generating stack file for EREC upgrade

I need to upgrade E-Recruitment 604 to 606.
Currently we are on Netweaver 7.01 While adding this system in SOLMAN 7.1 SPS 05 in order to generate
stack.xml file i manually selected this product system in product system
editor and we had selected below combinations
1)EHP4 for SAP ERP 6.0/NW 7.01(marked as installed) + SAP ERP
-> started MOPZ with same and selected target as SAP ERP 6 EHP 7 but
while doing so got error as Invalid queue because EA_APPL is not selected
but actually EA_APPL is not in components for EREC system
2)EHP4 for SAP ERP 6 with ABAP technology and E RECRUITING + EHP1 for
NW 7.0
->started MOPZ with target as SAP netweaver 7.4 but while doing so
getting error as "EHP Component ERECRUIT 604 without suitable Technical Usage!"
and Mark relevant instance to include the software component ERECRUIT
604 in SMSY/LMDB but Product system editor is perfect and verification tool is also green.
Please help
Warm Regards,
Sumit

Problem has been resolved.
SAP E-recruiting should be selected in SAP ERP 6.0 as a pre-requisite.
Warm Regards,
Sumit

How to Generate XML File from Java Code.

I want to generate the xml file from the java code.
Could you plz suggest any webSite address with example?

Here is the code
import java.io.File;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.FactoryConfigurationError;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
public class CreateXML {
     private DocumentBuilderFactory factory = null;
     private DocumentBuilder builder = null;
     private Document document = null;
     public CreateXML() {
          try {
               factory = DocumentBuilderFactory.newInstance();
               builder = factory.newDocumentBuilder();
               document = builder.newDocument();
          } catch (FactoryConfigurationError e) {
               e.printStackTrace();
          } catch (ParserConfigurationException e) {
               e.printStackTrace();
     /** Creates the document for xml. */
     public Document createDocument(){
          try{
               Element root = document.createElement("Root");
               Element child = document.createElement("child");
               root.appendChild(child);
               document.appendChild(root);
          }catch(RuntimeException e){
               e.printStackTrace();
          return document;
     /** Saves the document as xml. */
     public void saveDocument(Document document){
          try{
               TransformerFactory transFactory = TransformerFactory.newInstance();
               Transformer transformer = transFactory.newTransformer();
               DOMSource source = new DOMSource(document);
               StreamResult stream = new StreamResult(new File("sample.xml"));
               transformer.transform(source, stream);
               System.out.println("XML Created !!");
          }catch(TransformerConfigurationException e){
               e.printStackTrace();
          } catch (TransformerException e) {
               e.printStackTrace();
     public static void main(String args[]){
          CreateXML createXML = new CreateXML();
          Document document = createXML.createDocument();
          createXML.saveDocument(document);
}

How to Read and Generate XML file from java code.

hi guys,
how to read the xml file (Condition :we know only DTD or Shema only).
How to Generate the new xml file ?(using Shema )
And one more how directly Generate the xml from DB?
Pleas with code or any URL

Using XMLbeans you can generate Java objects from an XSD schema (perhaps DTDs aswell)
Then you can create an instance of the Document object and ask it to write itself.
This will create an XML document complient to the schema.
XMLBeans generates a "type" safe DOM where you can only ever have a structure compilent to you schema.
matfud

Generate XML file from Billing Output

Hello,
We have a business requirement to generate XML file from billing output and the same needs to send to external system for document printing. In this regard, could you please guide the steps to configure or share the document on how the system to be configured to support the XML file generation from billing document.
Anticipating a positive reply
Thanks in advance
Best Regards,
Goutham

another option is to configure an outbound IDOC and set the port for this IDOC to generate an XML file.
here again there will be IDOC control record in the first section of the IDOC XML generated.'
rgds

XML file for SEPA Credit transfer

Hi All,
I am working in ECC 6.0. The system was configured to generate XML files for credit transfer as per SEPA guidelines. The files are being created in the application layer. But the line length is being restricted to 255 characters. As per the specifications of a XML file in apllication layer. all information should be contained in one single line.
Secondly the job log for the payment medium creation program contains the below mentioned line among others -
"Incorrect Print Parameter" of message class "0K", message no. 091and message ID I
Can anybody tell me what is going wrong?

HI,
Can you please help me in solving the issue when using the PMW format SEPA_CT.
My co. code currency is EUR and when paying the invoice which is in GBP i am not able to get the currency EUR in the DME file generated by the payment run instead I am getting the currency GBP.
As per the SEPA concept evey payment will be in EUR irrespective of the currency in which the invoice is raised. So please let me know what needs to be done to get the local currency EUR amount the DME file for the payment made against invoice raised in GBP...
Thanks in Advance..
Regards
Sanjeev

Need to generate a Index xml file for corresponding Report PDF file.

Need to generate a Index xml file for corresponding Report PDF file.
Currently in fusion we are generating a pdf file using given Rtf template and dataModal source through Ess BIPJobType.xml .
This is generating pdf successfully.
As per requirement from Oracle GSI team, they need index xml file of corresponding generated pdf file for their own business scenario.
Please see the following attached sample file .
PDf file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/BPA_Print_Trx-_output.pdf
Index file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/o39861053.out.idx.txt
In R12 ,
     We are doing this through java API call to FOProcessor and build the pdf. Here is sample snapshot :
     xmlStream = PrintInvoiceThread.generateXML(pCpContext, logFile, outFile, dbCon, list, aLog, debugFlag);
     OADocumentProcessor docProc = new OADocumentProcessor(xmlStream, tmpDir);
     docProc.process();
     PrintInvoiceThread :
          out.println("<?xml version=\"1.0\" encoding=\"UTF-8\" ?>");
               out.print("<xapi:requestset ");
               out.println("<xapi:filesystem output=\"" + outFile.getFileName() + "\"/>");
               out.println("<xapi:indexfile output=\"" + outFile.getFileName() + ".idx\">");
               out.println(" <totalpages>${VAR_TOTAL_PAGES}</totalpages>");
               out.println(" <totaldocuments>${VAR_TOTAL_DOCS}</totaldocuments>");
               out.println("</xapi:indexfile>");
               out.println("<xapi:document output-type=\"pdf\">");
out.println("<xapi:customcontents>");
XMLDocument idxDoc = new XMLDocument();
idxDoc.setEncoding("UTF-8");
((XMLElement)(generator.buildIndexItems(idxDoc, am, row)).getDocumentElement()).print(out);
idxDoc = null;
out.println("</xapi:customcontents>");
     In r12 we have a privilege to use page number variable through oracle.apps.xdo.batch.ControlFile
          public static final String VAR_BEGIN_PAGE = "${VAR_BEGIN_PAGE}";
          public static final String VAR_END_PAGE = "${VAR_END_PAGE}";
          public static final String VAR_TOTAL_DOCS = "${VAR_TOTAL_DOCS}";
          public static final String VAR_TOTAL_PAGES = "${VAR_TOTAL_PAGES}";
Is there any similar java library which do the same thing in fusion .
Note: I checked in the BIP doc http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/javaapis.htm#CIHHDDEH
          Section 7.11.3.2 Invoking Processors with InputStream .
But this is not helping much to me. Is there any other document/view-let which covers these thing .
Appreciate any help/suggestions.
-anjani prasad
I have attached these java file in kixs : https://kix.oraclecorp.com/KIX/display.php?labelId=3755&articleId=354962
PrintInvoiceThread
InvoiceXmlBuilder
Control.java

You can find the steps here.
http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

How to generate an XML file for an animation of IK armature

Can someone please tell me how to generate an XML file for an animation of IK armature.
I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature. I need the XML information from the animation.
When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
Thank you,
c

I hope that's not the case. I want to write to adobe about it. I think it's a great feature and it functions really well even though it is not a very developed IK tool. My biggest issue with it is ouput options and integration with motion tweens.
I have seen a lot of examples of animators using it online, just no one talked about output. I just feel it hasn't been developed. It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens. I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

How to send the dynamically generated XML file to other site for further processing?

I have a question regarding exchanging data between two systems
using XSQL servlet. The situation is descrbed as the follows:
Assume that we have a simple XSQL page named "emp.xsql"
<?xml version="1.0"?>
<?-- XSQL page file "emp.xsql" -->
<xsql:query xmlns:xsql="urn:oracle-xsql" connection="demo" >
SELECT * FROM EMP
</xsql:query>
and we can access it through the HTTP request likes
http://web_server_name/xsql/emp.xsql.
Usually we will the returned dynamic XML file and show it on the
screen. Now the problem is that we don't want to show the
generated XML file on the calling screen. Instead, we want to
send the generated XML file to other website for further
processing, say, using JSP or ASP likes
http://other_web_server_name/XMLProcessing.jsp?.....
How can it be implemented using XSQL servlet?
Any hint and outline of the solution is appreciated.
Thanks

Ike,
Do you have a sample. I am searched so much in this forum for samples. I looked on SAX Parser. I did not find any samples.
Please help me.
Thank you for your posting.
Padma.

Form2xml generate xml files with "??????????" for non-latin characters

i used form2xml in oracle 10 g suit to convert forms 5 .fmb to .xml . using the command:
frmf2xml.bat OVERWRITE=YES myform.fmb
The forms contains arabic character set, but the xml file is generated with character "????????? " , and the xml file is unusable
what can i do to keep arabic characters in the generated xml files.
Edit:
I run form2xml on windows xp SP3 with arabic support (codepage =1256)
The xml file is generated as UTF-8

I resolved the problem.
step1: search in the registry for every NLS_Lang key and modify its value to codepage 1256 using regedit
step2: in control panel-Region and Language , I modified language to be Arabic
Now every thing is good

Where are the xml files for code generator of MSAHH5?

I'm generating source files for MSAHH5 and in the source code I can find xml files for generating all entities and DAL for those entities but I can't find anywhere files for MSATableConstants.xsl and MSAPersistanceManager.xsl and if I leave them alone they don't generate any class. I tried all xml in the code-generator folder without luck. What files should I use?
Thanks in advance.

Hi,
    I will answer your question in 2 parts.
1. Which files are used to generate what?????????
For entities:            Entity.xslt+ Entity.xml
For MSATablesContants:   MSATableConstants.xslt+
                         Entity.xml
For MSAPackageManager:   MSAPackageManager.xslt+
                         Entity.xml
For DAL Generation:      DAL.xslt+DAL.xml
2. Where these will be generated?????????
It depends on the path of the project that you are giving. If in the code generator tool when u make a new project give the path as the path of your project in eclipse.
Otherwise if you give path as ./ means the current folder from where you r running classgenerator.jar
you have to manually create folders like
C:\classgenerator\com\sap\crm\handheld\db\dataaccess for DAL classes and similarly for entities etc.
Hope this is clear
anubhav

How to generate XSD file for XML schema adobe form

Hi,
I want to generate XSD file for XML schema interfaces adobe forms. How can I do it. Where I can do it..or who will provide this file..
Thanks
Ram
Edited by: Ramesh ram on Feb 23, 2010 6:33 PM

Aaaaah, my mistake, sorry for that. Of course you should use the XML interface and I forgot it is not described in this tutorial. You can easily find another one where the XML based interface is used. But... you won´t need any tutorial. just create a WD context. Place a Interactive form element on your WD app screen, in the attributes you need to maintain the form template name. If you write a name suitable for you which no existing forms uses, the system will offer you to generate a XML based interface and right after that it will "send" you to the SFP transaction. That means you can like skipi the step defining the interface because it it is generated automatically and you only draw the layout for this generated interface.
You should use XMl based interface for your WD app, because when using the ABAP dic based, some features are not available (I am not sure, but ABAP based works only for print form or something).
Hope it is all clear now,
have a nice day,
Otto

Do i required to generate XML file for JAVA upgrade.

Similar Messages

Maybe you are looking for