Do i stop services b4 making rpd online in 11g

hi
do i need to stop the services if i have to make an rpd online.??
i am using obi11g.

Hi mahesh,
No need to stop the services when online either in 10g or 11g.
@@Mahis....please close your other posts by awarding points.Here are the posts by you http://forums.oracle.com/forums/thread.jspa?threadID=2134806&tstart=15
http://forums.oracle.com/forums/message.jspa?messageID=9162196#9162196
Follow the rules and mark points.To follow rules go through this link http://forums.oracle.com/forums/ann.jspa?annID=939
By,
KK

Similar Messages

How to make new RPD online

Hi All,
Please tell me how to make an rpd online.
In my development environment, there is already one RPD online.
Now I am creating another RPD and want to make it online and create a answers report based on my RPD.
Please tell me hw to replce existing online rpd with my newly created rpd.
I would like to know the steps..
Environment details in my development are as below;
I have BI server on separate server machine. The current BI server is pointing to an RPD pointing to oracle EBS datasource
On my own laptop I have BI Admin tool installed. I am creating another rpd based on planning database (Essbase DB). I want to replace current online rpd (pointing to EBS) with my new Rpd (pointing to Essbase DB). and then create a report on Essbase datasource.
Thanks and Regards
Santosh

Hi Santhosh,
1. Intially, stop your services -> Oracle bi server, Oracle bi presentation server.
2. Open BI Administration tool -> File -> Create new rpd -> give some name say 'test' with no physical, bmm, pres. layers.
3. Niow - Open C:\oraclebi\server\repository ----- Here you can view your rpd (to confirm)
4. Now - Open C:\Oraclebi\server\config ---- Here you can view 3 files
5. Right click on Nqs Config file and open it.
6. You will find a section called [Repository] under which by default it has Star = samplesales.rpd, DEFAULT;
7. Now, Comment the above one by adding '#' symbol in front of it.
8. Within the same section write the following Star=test.rpd,DEFAULT; Save the Nqs File.
9. Now - open C:\oraclebidata\web\catalog and create a new folder 'test' - this is catalog folder where your reports gets stored.
10. Open C:\oraclebidata\web\config --- Open Instanceconfig file.
By Default you can view that catalog path --- pointing to Samplesales
<CatalogPath>C:/OracleBIData/web/catalog/samplesales</CatalogPath>
Change it to: <CatalogPath>C:/OracleBIData/web/catalog/test</CatalogPath>
11. Save instance config file.
12. Restart your services - oracle bi, oracle bi presntation server and now you can also open rpd in online or offline mode (i.e. your rpd 'test')
Thank you....

BI server start/stop services

Hi,
We have OBIEE installed on a unix server. Previoulsy I worked on OBIEE on windows server and would go to services and start/stop services. My question is if we modify the rpd and ftp it to unix server, do we have to stop and start the BI server for the modified rpd to work. Is it mandatory to stop the BI server, ftp the rpd and then start BI server again. Or if we do not stop the BI server and just do Refresh matadata from Answers..will this work? Thanks.

Hi User,
You should restart the services if u ftping the rpd to unix means deploying the rpd to effect the changes
When comes to refresh metadata this ll work in case when the rpd opened in online mode and some one has made changes to get the available changes u have to do "Refresh Metadata"
Thanks,
Saichand.v

Not able to open RPD online mode

Hi,
Im not able to login to RPD online. Throwing following error,
[nQSError:37001] Couldnot connect to the Oracle BI Server Instance.
All my services are up and the status are Alive,My biserver is in Running Mode and I am able to open the Answers page too.
I am able to open the same RPD in Offline mode but not in Online mode.
After some time services are down though.
Can you please help me to resolve this Issue.

I can connect to repository in offline mode (start > All Programs > Oracle Business Intelligence > Administration). However, when I try to connect in online mode I get following error:
[nQSError:37001] Could not connect to BI Server Instance.
After getting this error when I check services I see that Oracle BI Services has stopped.
I restart the service and try to connect in online mode and again I get the same error - [nQSError:37001]...... and see that Oracle BI Server service has stopped.

Failover Cluster in SQL 2012 in not auto switch when stop service SQL

Good Morning to all,
I'm Mr.Tuyen from VietNam. I have a big problem with AlwaysOn High Availabity in SQL 2012.
I setup 3 server and join Availabilty Group. Ex: Server A (Primary), Server B (Secondary), Cluster Qourum is only node. I have test:
1. Stop service SQL server A, immediately server B is Primary
Start servicel SQL server A, Server A is secondary
2. Stop service SQL server B, server is not Primary and "status is Resloving" and role cluster failed with error as belows
[i]Clustered role 'XXX' has exceeded its failover threshold. It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. No additional attempts will be made to bring the role
online or fail it over to another node in the cluster. Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring it online again after
the restart delay period.[/i]
or
The Cluster service failed to bring clustered role 'XXX' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered role.
Do you have same error?

http://blogs.msdn.com/b/sqlserverfaq/archive/2012/03/15/inf-alwayson-the-secondary-database-doesn-t-come-automatically-when-the-primary-instance-of-sql-server-goes-down.aspx
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Batch file to start and stop services

I've setup a CF Probe on my Development Server to ensure my
CF Production server is up and running (services = Apache and CF
Application Server). It checks the PROD login page and if it times
out in 30 sec the probe fails. I understand I can execute a file
(batch file with net start and net stop) but the problem is I need
to have the probe somehow point to the .bat file on the PROD server
and not on the local machine. How can I remotely access this batch
file and execute it? I don't know how to point to the file on the
other server... can anyone help?

Hi Ken,
You had pointed me in the right direction regarding the
psstools in order to create a batch file that can remotely start
and stop services.
i used the psexec command and am able to successfully restart
the services needed remotely... however when i pick the file in the
coldfusion administrator (in the probes section) how to i point to
the batch file to run? it seems like the probe is not running the
script like i want... the file is located on the c:\ so i entered
c:\test2.bat...
Thanks,
Matt
Matt,
You should review the online help in the cfadmin for probes
and the links it points you to in the developer's guide. Basically
you need to define a new probe in the cfadmin by clicking the
"Define New Probe" button. One of the probe's attributes will be
what action. Define the action as a program and point it at a batch
file running psexec. You will probably need to run CFMX as a
specific user and not as localsystem, which is the default.

Worth it? Auto start/stop services and change iptables rules

I have recently set up a crontab to start/stop services based on my schedule, such as when I'll be home or away. I intend to only have a service running when I'll probably use it.
I also integrated rules for iptables into the start/stop of the services (systemd), so they automatically modify rules to accept/reject on their ports when the services start/stop.
I am behind a router, so I only forward outside ports I use like ssh (which is not on port 22). I manually forward ports, but am looking at UPnP. This is my home network so I should be able to trust the devices on it.
Now, to my question. Is it worth the time and effort to set this up? Would it be fine to just enable the services I use, let them run and always have firewall ports open for them? I feel like it's good to limit the time that ssh is running, but what about services not open to the Internet? Resources aren't really an issue. What do you guys think?
I enjoyed learning about systemd, iptables, and cron in the process of setting it up. I'd just like to also learn about how much benefit there actually is, or if anyone has other ideas. Or if it's something that could go on the wiki (not really cron, but maybe the iptables/systemd stuff).

I'd say, if resources aren't an issue; why limit the time ssh is reachable from the outside? You should have PasswordAuthentication and RootLogin disabled anyway so your vulnerability doesn't really decrease by updating iptables? This script probably works fine until you forget about it and it makes a boo-boo; making your machine unreachable.

Can not open RPD online via OBIEE Admin Tool

Hi all,
I am facing problems trying to open a RPD online via Admin Tool.
I made an upgrade from 10g to 11g on a Windows XP machine.
The errors are:
Logon failed due to: [nQSError:43113] Message returned from OBIS
[nQSError:43004] Session: 250f0000 repository name: my_new_repository.rpd is invalid
[53003] LDAP bind failure: Can't contact LDAP Server
[37001] Could not connect to the Oracle BI Server instance
Here the checks I did:
1) The database is running.
2) I pointed the existing ODBC connection to the new .rpd file.
3) All BI Services are running
4) The new rpd file is on the Oracle BI Server directory like the old rpd file
What am I doing wrong here?. Where else can I check if there is something wrong?
I hope somebody can help me. Mostly my questions have no answer. It's really dissapointing!

Hi Hussein,
thank for your answer. I see you get used to send me only Metalink Support Links. Unfortunately no one adjusts to my problem.
Unfortunately no one else writes me an answer in this forum. So maybe I am spending my time in this forum.
I don't have any chance except continuing by searching for in google :-(

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download from other stores. Why do am i forced to try to nread Japanese when I have selected English as my language. The price for Downloads is no different and even if it was I am happy to pay. This also applies to Movie rental which is crazy and extremely restrictive. I a supposed GLOBAL community why does Apple do this.

You can buy ONLY from the itunes store of your country of residence (As proven by valid billing address of credit card) and ONLY while inside the borders of that country.
These are the terms of the itunes store.

How can I stop iMovie from making thumbnails of clips from past projects when opening the program to digitize new clips for new project. i have looked in the preferences and couldn't figure out what to disable.

How can I stop iMovie from making thumbnails of clips from past projects when first opening the program to digitize new clips for a new project. It takes forever for it and is very annoying. I have looked in the preferences and couldn't figure out what would disable this problem.

You do not need to move your cursor much when pressing the mouse button to cause the tab to tear-off/tear-away into a new tab. No "sensitivity" setting that I am aware of. The tab in the new window can be dragged back to the original window.
To disable the feature, install this: https://addons.mozilla.org/en-US/firefox/addon/bug489729-disable-detach-and-t/
*Read the information on the above page
*Set options for the add-on: Add-ons > Extensions, click Options next to the specific Extension (the 2 options are defined/explained in the above page).
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

HT4461 I recently downloaded an app from App Store which is a paid app and it doesn't have any features as in the description in the App Store. How do I report this app and stop payment what I did online to purchase it.

I recently downloaded an app from App Store which is a paid app and it doesn't have any features as in the description in the App Store. How do I report this app and stop payment what I did online to purchase it.

Hi Sajeed.f,
This article has the steps to go through to file such a report:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers!
- Ari

Error 1921: Stopping Services

During the middle of the installation and error pops up, tittled 1921. The error says I need to verify my Apple Services something. Can somebody please help me? Thank You.

I'm having the exact same problem.
Here's my situation: I downloaded iTunes a few years ago, never thinking I would get an iPod. It's version 4 or so. Now I just got an iPod and I needed to update to the newest iTunes because iTunes 4 wouldn't recognize the iPod. I try to install and it stops at "Stopping Services", then after a little while this error pops up:
"Error 1921.Service iPod Service (iPodService) could not be stopped. Verify that you have sufficient privileges to stop system services."
I click Retry and it happens again. I click Cancel and it exits.
I tried to uninstall thru Control Panel, and the exact same thing happens: it stops at "Stopping Services" and the same error pops up.
I still have dial-up, and I have some songs that I haven't downloaded yet. I wonder if this has anything to do with it...
Please, if anyone can help, this is driving me nuts! Thanks.

Attempts to cancel EXportPDF service have been unsuccessful online. Can someone at Adobe help?

Attenpts to cancel ExportPDF service have been unsuccessful online. Can someone at Adobe help?

Good day Joseph,
My records show that a return for your ExportPDF subscription was initiated on November 20th.
Please let us know if we can be of further assistance.
David

How to open the rpd online

Hi
what are the settings we have to made to open the rpd into online
i tried somany times but idint get
plz give steps to open the rpd in online mode
thanks
arya

HI,
Check these links completely, opening rpd online more is more or less same as in 10g.
In 11g you need to enter rpd pwd followed by weblogic password.
http://onlineappsdba.com/index.php/2011/07/26/configure-obiee-11g-client-to-connect-to-11g-rpd-in-online-mode/
http://gerardnico.com/wiki/dat/obiee/repository
http://bidevata.wordpress.com/2011/11/23/how-to-keep-rpd-and-catalog-in-online-mode-in-obiee-11g/
Default pwd is Admin123
OBIEE 11g: Are you try to login widows 7 then refer the below link.
http://www.ascentt.com/2011/10/to-open-obiee-11g-rpd-in-online-mode/
Hope this help's
Thanks
Satya

Stopping Siri from making calls

Hi guys, is there anyway of stopping Siri from making calls? The problem I am having is that I use Siri on my motorcycle and at high speeds it gets the commands wrong. For example, I say 'play podcasts' and it calls one of my contacts.
Ross

My bad.
I had Airplane mode on but WiFi was also still on when I tested it on my phone.
Scratch that idea...
Here's another one.
If you turn off Siri altogether, you'll revert to the older Voice Control which doesn't rely on a nertwork connection.
Perhaps, that mode will be less likely to misunderstand than Siri.
Matt

Do i stop services b4 making rpd online in 11g

Similar Messages

Maybe you are looking for