Do I use data when using facetime?

I have seen different answers to this question and was wondering does facetime use data? I am on shared family plan with 2gb of data and can't seem to find the right answer if it does or does not. I saw somewhere it uses wifi, but what if I am not connected to a wifi so does it use data?

However on an iPhone with cloud services "songs downloaded to the iPhone" do not use data. You will know if its using data if you see. the little cloud with the down arrow next to the song. Its being ready for download to the iPhone. Those without it are already on the iPhone.
Good Luck

Similar Messages

Why do my 5c and 5s use data when I am on WiFi? And why does it show up in regular intervals of 6 hours? Very strange.

I am really having problem controlling the data usage. It seems that iPhone 5c and 5s both use data when wifi is available. And plus, the data seems to be dumped all at once every 6 hours most of the time. I know I am neither uploading nor downloading 140MB over data at 7am. DOes anyone know how to control this?
I switched off almost all background data usage (except messages). I am not on facebook etc. What is going on?

Thanks for trying Jay's suggestion, zole. The iPhone should still be able to use WiFi to send and receive iMessages. By design though, Apple devices will turn off WiFi when the phone goes dormant (screen turns off) so if you are in the midst of downloading something or a new message comes in, the phone will be using the available mobile data by default. You can turn cellular data on or off for individual applications http://vz.to/1IuZJIM instead of completely shutting off the cellular data. In that same section, you can see what applications may be using more cellular data than others to go into that specific app for settings (for example, if Facebook is using a lot of data, go into the application's settings and make sure the video autoplay is turned to WiFi only).
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

How can forbid changing data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~

you have to find out what the user did before your program goes ahead and starts the BAPI.

How can forbid changging data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~
Edited by: lorryhappy on Dec 22, 2009 11:35 AM

Hi
You can achieve it in another way..
Before Passing Data to BAPI , Check whether the material is existing or not..
If material is existing (Present in Material Master Tables e.g. MARA ) using
data: l_matnr like mara-matnr.
Select single matnr from mara into l_matnr.
IF sy-subrc EQ 0.
" Material is existing ==> Do Not Pass to BAPI
else.
" Material is NOT existing ==> Pass to BAPI for creation.
endif.
Repeat above logic for every material in batch..
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

NFL Mobile App Used Data When Not Open

I used the NFL Mobile App last night for the first time. I connected to my WIFI thinking it wouldn't use any data. But it did anyway. And then during the night when the app was closed it used a whole lot of data on its own. I have notifications turned off. Why should this be using data when not open? And why should it be using data when on WIFI?

To have to go to settings, apps, find the app and then force stop is
a lot of steps just to stop an app. Not really an acceptable solution.
However, I re-installed the app. Opened it to make sure it worked ok. Made
sure my WIFI was on during all this. Then went to apps and did a force stop.
Took several tries to get it to stop for some reason. Later I noticed my phone
seemed to be using a lot of battery for some reason. Re-booted phone to make
sure all apps had closed. Went back in and checked the NFL app. It was no
longer stopped. I force stopped it again. Took several tries. Waited a few minutes
and checked again. It was no longer stopped. For some reason it won’t stop. So
I had to un-install it again.
Not sure why all this is happening with this particular app, but I can’t take the
chance of inadvertent data or battery usage. So it will remain un-installed until
someone tells me the problem has been fixed. It’s a shame as since this is one
of the perks of my Verizon account, I feel I have been slighted. I can’t believe I’m
the only one having this issue.
Jim

Do I use data when I read on my kindle app on my iPad

Do I use data when I use my kindle app on my iPad

You should only use data when you download the book. As I understand it your book is on your device and you read it from there. The only data usage I can think of is if you are doing their 'sync your book across your devices' then Device one would have to tell Device two 'she's on page 49 now'

Does verizon selects collect data when using wifi ?

When signing up for verizon selects is states it collects data when using wireless service but does it collect data when using home wifi which is not verizon?

I'm not sure why one would want to participate in this program but if one is weary about it I for sure wouldn't use it.

Phone is using data when not in use. How do I make it stop?

My iPhone 4S is using data when not in use. Any thoughts on how to make it stop?

Hello Oakleymp
You could always turn off cellular data in Settings to get it to stop using data while it is on standby. Another option to troubleshoot the issues is to reset all settings, go to Settings > General >Reset > Reset All Settings.
iOS: About the Cellular Data setting
http://support.apple.com/kb/HT4203
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Is there any way to stop my iPhone use data when i hit the data limit so i don't go over the data limit

is their any way to stop an iphone 4s from using data when i hit the 2gb limit on verizon wireless this way i dont have to pay the fee for extra data
thank you

Don't know of any way for it to happen automatically, but you can still use the phone and send/receive sms with cellular data turned off.

How to use data function using characterstics variable for calculation on

how to use data function using characterstics variable for calculation on attribute as key figure

Hi Gayatri
Did you not see my answer for CASE because CASE does indeed offer the use of the BETWEEN clause, but DECODE does not. Let me give you a little synopsis of DECODE.
In its most simple form it takes 4 values and looks like this: DECODE(A, B, C, D)
This essentially means, IF A = B THEN C ELSE D
The trick to solving BETWEEN in a DECODE is to work out algoriths where A = B. Because we don't know how many values are between 00 and 99, although I could guess there were 100 we could of course have 100 parts in the DECODE but that would be awful. How about if we look at it another way and say this:
IF PART_NUMBER < 'SDK00' THEN pay_amount
ELSE IF PART_NUMBER > 'SDK99' THEN pay_AMOUNT
ELSE pay_amount + 100
This statement only had 2 hard coded values, but how to make DECODE work with less than? Easy, we use the LEAST function. The LEAST function takes 2 values and returns the one with the lowest value. So I use LEAST(PART_NUMBER, 'SDK00') then whenever the PART_NUMBER is lower than SDK00 it will be true. A similar situation exists for the opposite function GREATEST. Putting all of this together then, you can do this:
DECODE(PART_NUMBER, GREATEST(PART_NUMBER, 'SDK00'), DECODE(PART_NUMBER, LEAST(PART_NUMBER, 'SDK99'), PAY_AMOUNT * 100, PAY_AMOUNT), PAY_AMOUNT)
In English this can be read as follows:
IF the PART_NUMBER is greater than or equal to SDK00 and the PART_NUMBER is less than or equal to SDK99 THEN PAY_AMOUNT x 100 ELSE 0
Best wishes
Michael

Is there a known issue for using IE11 when using business catalyst cms

Is there a known issue for using IE11 when using business catalyst cms? I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
Regards.

Question about using email when using computer at internet cafe

I am confused about using email when using my computer at an internet cafe.
Of course - I use the internet cafe's wifi connection/network.
How does this effect my email?
what do I have to do to use my email when logged on at an internet cafe?

zxcvbnm1 wrote:
I am confused about using email when using my computer at an internet cafe.
Of course - I use the internet cafe's wifi connection/network.
How does this effect my email?
what do I have to do to use my email when logged on at an internet cafe?
You don't give enough information to do more than discuss the issue in general terms.
You should be able to read your email wherever you can get an internet connection.
To send email, it depends on the email provider you are using. Gmail and other web based mail should not have any issues. However, if you are attempting to use an account that uses your ISP's mail servers, you will probably not be able to send mail. You may want to check with your ISP in that case, to see if they offer webmail.
Hope this may have answered your question.

When I connect to wi fi does my 3G automatically switch off. As I seem to be using a lot of my data when using wi fi at home

When I connect to wi to, does 3G automatically switch off my iphone4s as I seem to be using a lot of data even when using wi fi at home ?? Thank you

Hi,
As far as I know, when you have a WiFi-connection all data will go through WiFi and therefor will NOT use your 3G data.
Kind regards,
Hugo

OTF end command // missing in OTF data when using CONVERT_OTF_2_PDF

Hi
When using the function module CONVERT_OTF_2_PDF I am getting the strange scenario that for some users it is giving the error message "<u><b>TD 030: OTF end command // missing in OTF data</b></u>".
I am executing this function module using the OTF output data received from a smartform executed with the parameter control-parameters-getotf = X and I am not formatting it in any way.
any assistance in this is much appreciated.

hi
good
go through this link,which ll give you detail idea about this function module
http://www.jt77.com/development2/programming-07636.html
thanks
mrutyun^

How is it possible to use data when you hardly even use your phone?

I just got an LG G3 phone yesterday afternoon and have 500 mg to use and have already maxed it out and have hardly even used the phone!!!!!!!!!!!!!! It has data been used why I am sleeping and when I know 100% I am not even on my phone. I use my laptop for all internet. My husband doesn't even use the internet, and if he does I am the one that finds the page he needs, and he really doesn't even know how to use it. He has a basic flip top and doesn't want anything more. So, please help me understand how data is being used almost all day, all night, and even when we are sleeping and the phone is not being used for anything? As a matter of fact, I am on my laptop and can't sleep because of this!! My phone is in the other room and I bet data is being used right now. But, I know don't anyone uses that much data in a DAY and A HALF when the phone is not in use. I have had three phone calls all day and only one I answered and I made one call out, but data has been used all day. And I have had free 250 mg for probably at least six months and have used no data and now all the sudden when I have been on my laptop all day the data is used. Can someone please help me understand how this is possible?@

GZRX wrote:
Recently came back on Verizon contract cell service after years on various prepaid services. The S5 is my first unrooted smart phone and I am pretty paranoid about data usage as no longer able to use Droidwall and Titanium Backup.
Phone default settings are Data Off, Playstore set to wifi update only and background data off for many apps. I have "My Verizon My Data app" and "Active Apps" app on home screen for monitoring purposes. Something seems to infrequently activate the You-Tube and Chrome apps randomly. Cloud is turned off as I back up to Google and my computer. I have a number of other apps turned off as well and monitor "Data Usage" for unwanted app data consumption. Also have data usage warning and shut off levels set in the phone. My plan is 1 GB and I am regularly using under .5 GB.
correction to above: my reference to "Phone default settings" above is misleading. That should be my worded as "My current phone settings:" Unfortunately I am not permitted to edit my previous post.

Do I use data when using facetime?

Similar Messages

Maybe you are looking for