Do image files adjusted in Lightroom transfer to another computer if you need to reload the files?

I'm used to making adjustments in Camera RAW and copying the image files for use on multiple workstations. In this case, my adjustments go with the image file. If I make my adjustments using Lightroom and move the image files to another computer will I lose those adjustments? I wonder if I invest all my adjustment time using Lightroom and my computer crashes will I lose those adjustments even though I am backing up my files to an external drive.

You wrote: " If I make my adjustments using Lightroom and move the image files to another computer will I lose those adjustments?"
Yes, you will loose them unless you save to xmp. You save to xmp by either pressing Ctrl / Cmd + letter "S" or
a) in the Library Module you go >Metadata >Save Metadata to File, or
b) in the Develop Module you go >Photo >Save metadata to file.
Without <Saving metadata to file> Lr writes the edits into the catalog only. And, if you transfer images without the catalog to another computer your edits will be lost on the second computer.
By <Saving metadata to file> a xmp sidecar file will be created that stores the edits. In case of a DNG the edits are not written into Xmp but into the file header - same effect.
Note though that not everything can be stored in xmp-files. For instance collections, stacking are stored in the catalog only.
This is presumably so because the save to xmp was created in order that Lr adjustment can be viewed in other Adobe products (for instance in Bridge). Naturally, only those "features" need to be written into xmp that the other program can display.
WW

Similar Messages

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

How to Transfer Files from Your Ipod to a New Computer when You Don't Have the Old One?

My old computer crashed and I have a new one now, how do I transfer the files from my ipod to my new computer itunes program???

I am having the same problem. My iPod classic has all of the music on it and I need to get it into iTunes. Unfortunately, I had not had the computer very long and it did crash before I was able to back anything up.

How do I transfer my catalog, files and collections into Lightroom 4 onto another computer?

How do I transfer my catalog, files and collections into Lightroom 4 onto another computer?

You can copy your image file from you PC to your Mac over your home network or via DVD/CD. You can not install you PC CS5.1 version on you Mac. Its not compatible with MAC OS. You would need a MAC version of CS5.1 and Mac version serial number to activate it. Adobe no longer markets CS5 so you most likely will not be able to pay for a platform switch media install.

How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

I am having problems with Olympus .orf files one files cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

i am having problems with Olympus .orf which cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

That camera model is too new for your programs. Every camera has its own raw format and ACR must be updated to include the info for each new model as it comes out. The workaround would be to download the free Adobe DNG converter and use that to convert your ORFs to DNGs that your version of Camera Raw can read.

Using Lightroom 4 w/ Windows 7. Recently started shooting w/ Sony camera .arw files. Lightroom cannot read the files. Loaded Adobe converter program onto the computer and this program cannot read the files either. Any suggestions?

Using Lightroom 4 w/ Windows 7. Recently started shooting w/ Sony camera that shoots .arw files. Lightroom cannot read the files. Loaded Adobe converter program onto the computer and this program cannot read the files either. Any suggestions?

Thnx again for the reply. The version of Lightroom I have is 4.0 (working w/Windows 7) This computer and all media files are kept off-line After doing more research, I downloaded DNG Converter 7.1This loaded into a .zip folder, which I am planning to install into the off-line computer andrun. Where does this folder go?
And will this set up work with my version of Lightroom?
What a pain. Makes me wanna go back to shooting .nef files for all stills
Thnx

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe

Does lightroom have photo merge or do you need full photoshop?

does lightroom have photo merge or do you need full photoshop?

You're welcome. If you have Photoshop or Photoshop Elements installed, when you right-click on an image in Lightroom and choose to edit in one of those programs, one of the options is to merge to a panorama using that program. If you don't have program installed that will do that the option will not appear.

File is huge when combined or changed to PDF, how do I get the file to a normal size to print?

Files are to large to print once they are PDF, how do I get them to a normal 8x11 size to print?

So why is it when I send these PDF files to clients they are to large for clients to print?
If I send a combined PDF file that is 3817KB, which a client has said is to large for them to print.
I send it to our office manager, she will print it, scan it back to me as a PDF, it will come
back as 375KB, the client can then print the file.
My question is, was/is there something I need to change in the process of scanning, combining files
to PDF that would create a smaller size file when done?
Sorry for all the confusion
Marilyn Bartunek
Juffer Real Estate Inc.
605-360-7703
[email protected]
Date: Tue, 1 Apr 2014 10:13:35 -0700
From: [email protected]
To: [email protected]
Subject: file is huge when combined or changed to PDF, how do I get the file to a normal size to print?
    Re: file is huge when combined or changed to PDF, how do I get the file to a normal size to print?
    created by Test Screen Name in Creating, Editing & Exporting PDFs - View the full discussion
Sorry, I'm lost.First I thought this was about page size. But you say it isn't. You say it's about file size. You've combined files of 494 + 441 = 935 KB, and you get 944 KB. This seems fine and you say it is fine. So what is the problem? Are you now on still a third meaning of huge, about size on screen?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261540#6261540
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261540#6261540
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261540#6261540. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Creating, Editing & Exporting PDFs at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

Did you do the moving of the image file in the Finder or do you have a reference library as asked by Larry? In either case moving the files is a recipe for disaster as you've found out. You must either move the files back to their original locations or try to get those photos back into iPhoto as follows:
1 - Find the folder you moved the files into and COPY it to the Desktop.
2 - in iPhoto delete the photos that you're having the problems with as you normally would even though you can't see see them. Also delete all the photos that are in the folder you moved the other files into.
3 - drag the folder on the Desktop into iPhoto to import them as one event. If you get a duplicate warning I'd let it import the duplicate and use Duplicate Annihilator to find them so you can cull out the duplicate you don't want.
Other than that you might have to start over from scratch as follows:
Creating a new library while preserving the Events from the original library.
1 - Move the existing library folder to the desktop
2 - Open the library package like this.
3 - Launch iPhoto and, when asked, select the option to create a new library.
4 - Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
OT

When I attach a file in my email it is embedded. How do I just attach the file. Windows users would like to be attached not embedded how do I that.

When I attach a file in my email it is embedded. How do I just attach the file. Windows users would like to be attached not embedded how do I that.

I suspect that your Windows pals are using an e-mail program from the Stone Age.
In the last 10 years or so most people prefer to read attachments “in-line”. This allows text and images to be intermixed allowing an easier method of explaining things.
When I am dealing with a old-fashioned, obsolete Windows user that is using an older e-mail program I simply put all the attachments at the very end of the e-mail. This will make it appear more normal to them.
Not all Windows programs work in this primitive fashion. But as Mac users, we have become more accustomed to the modern methods of viewing attachments in-line.

I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but the automtic function doesn't see them. Can I insert a point for the layer split in DVD Studio Pro 3 or 4? It doesn't appear that the autom

I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but auto function does not see them. Went back and put a small split in the timeline in fcp and exported to mpeg 2 again and auto function does not see that either? Manual msays to manualy enter split poind in DVDSP but can't find any way to enter that split point in DVDSP? How can I manualy enter a split point in DVDSP 3 or 4?
Elizabeth/Roger Cook Films

This is definitely not the behavior I see. When I left click it adds a marker,
When I right click, I see the following
Do you have any OS hacks installed on your computer or have you changed the mouse behavior in system preferences: mouse? If not, I'd suggest you run digital rebellions preference manager and reset your dvdsp preferences.
https://discussions.apple.com/docs/DOC-2491

HT3775 I have a bunch of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document "001.MPEG" could not be opened. A required codec isn't available." Any advice on getting these to play?

I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!

Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
(85018)

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message.

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Do image files adjusted in Lightroom transfer to another computer if you need to reload the files?

Similar Messages

Maybe you are looking for