Do international settings require an admin?

I'm working on a new MacBook with Leopard 10.5.6 (I think it's .6) installed. I am working in a regular account, no admin privileges. I set up the language to be Spanish under "International" in the system preferences, but after logging in and out, and even rebooting, the changes don't take effect. In fact, the only place I see any Spanish is in the Format tab under International (and that's just to set the date/time formats).
Do I need to have an admin password to change the language? If so, I wonder why it doesn't ask me to type one in or have the option to rearrange the language order greyed out?
Ultimately, I would like to have the tech people create a new user where the language would be Spanish, for all other user accounts it will be English. Is that possible?

fogharty wrote:
I'm working on a new MacBook with Leopard 10.5.6 (I think it's .6) installed. I am working in a regular account, no admin privileges. I set up the language to be Spanish under "International" in the system preferences, but after logging in and out, and even rebooting, the changes don't take effect. In fact, the only place I see any Spanish is in the Format tab under International (and that's just to set the date/time formats).
Do I need to have an admin password to change the language?
no. those preferences are user specific and every user can access their own international settings without a password. to change the language of OS menus on your account you have to go to international system preferences->language and put the language you need at the top. you can remove all the other languages if they get in the way. then log out/in. is this what you did?
If so, I wonder why it doesn't ask me to type one in or have the option to rearrange the language order greyed out?
Ultimately, I would like to have the tech people create a new user where the language would be Spanish, for all other user accounts it will be English. Is that possible?
yes. create a new user and in international preferences set language to Spanish and input menu to Spanish.

Similar Messages

Sending E_mail from ECC 6.0:- Configuration settings required

Hi frnds,
I want to know the standard functionlaity to send mails through SAP .
I m using trsansaction f.62 . I want to send internal documents through mail from the ECC6.0 system
Can anyone please help me in the Configuration settings required for the above mentions situation.
eg:- To send a payment advice to a vendor to his personal E-mail account which is mentioned in his master data.
[Reward points will be given to the best answer]
Thanks in advance.
Regards,
khushboo

Goto SCOT transaction, double click on STMP you will find the option
Maximum waiting time for repeat send attempt procedure:
Hours/minutes / 30. define the time over there.
II option execute the job- start send process,
Regards,
Mahesh

How to copy the International settings from current user to default user/welcome screen on Windows 8.1/ Server 2012R2 via PS script?

Hi,
I have to script the international settings in virtual machines which are Win Server 2012R2 or Win 8/8.1.
For the current user, it's quite easy.
new-WinUserLanguageList nl-BE
set-WinUserLanguageList nl-BE
Set-WinSystemLocale nl-BE
set-Culture nl-BE
But how can I copy these settings to the Default user/Welcome screen? I cannot find a solution for that. Even on the site of Microsoft,
http://technet.microsoft.com/en-us/library/hh852115.aspx all CMDlets are only for the current user.
Maybe I'm looking with the wrong keywords, but... With Powershell v4 it should be possible, isn't it?
Thanks for looking together and hopefully we can find an answer.
Kind reg,
Dirk

Questions like this would best be answered in the deployment forum.
The default lock screen tracks the current user. The system lock screen tracks the local system admin account.
There is a SYSTEM profile which, I believe, can be set via registry.
http://social.technet.microsoft.com/Forums/windows/en-US/20d36ce4-c948-4c68-a415-dda9e0665159/setting-default-ui-in-windows-8-or-81-using-dism-online-setuilangenus-gives-error?forum=w8itproinstall
¯\_(ツ)_/¯

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

What are the settings required to block a particular IP to make connection on particular port no running on another IP?

Problem:
-   What are the settings required to block a particular IP to make connection on particular port no running on another IP?
Environment:
Operating System            : - Windows XP Service
Pack 1
System type                     : - 32 – bit Operating System
Description: - We
have requirement to block Port access from particular IP. It is specific requirement for a machine.
We have service which is running on
Server with IP: - 10.14.15.116 on
Port Number 3366 and we need to
block Client Machine IP: - 10.14.15.114 to make
any connections with server on this port. Not even client machine
should be able to telnet on server on port 3366.
I
will be really thankful.
For any kind of input which can assist us to complete the requirement.

Does it allow in same way with firewall setting in Windows Server 2008?
I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
I
will be really thankful

BW settings required when we change the host name in R/3

Hi All,
we had a test system in R/3 and we are planning to change the Host name in R/3 and this is connected to bw test.after basis change the host name in r/3 test what are settings required to be done in BI .
Regards,
jasmine.

after name change check the RFC connection in SM59 and then see if you data sources are anabled from new source system.

How to put restriction/variable in BI 7.0 ? Is there any settings required?

Hello,
I am working on BI 7. I want to know ""How to put restriction/variable in BI 7.0 ? Is there any settings required? I am putting some variables in BI 7.0 while making some query""
amit shetye.

Hi Amith,
just create a new query like a previous versions how u create.. and now select particular charecterstic in the left side window itself.. and drill down it.. and create a variable.. and assign all the properties to that variable.. now drag that particular variable.. in to the Rows or filters..
for Restrictions... put any charecterstics into Free charecterstics.. and right clcik that and select Restriction. now you need to give the values.. based on that it will RESTRICT THE VALUES..
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
http://help.sap.com/saphelp_nw04s/helpdata/en/43/F9D041D6392AE3E10000000A422035/frameset.htm
BI7.0
For greater information on reporting.....
Good Knowledge in BW Reporting
regards
@jay

Customization settings required for Extenal service managment

Hi,
Till now we are not using External managment , now we want to confifure this , so what are the settings required for this.
regards,
zafar

Hi,
1. If you are selling the Service , Use Material Type u201CDIENu201D and for billing with SD module ,u have to use MM with HR module like (Time & Material ) ie..Expense recording (PR05) then PRRW and PRFI.
2 .If vendors provide service for you and you can procure the service and pay to vendor.
The configuration required are:
2.1. Define organization status for service category
SPRO u2013>MM-> ESM->Service master- >Define organization status for service category
2.2. Define Number Ranges
SPRO u2013>MM-> ESM->Service master- >.Define Number Ranges
2.3. Define Service Category
SPRO u2013>MM-> ESM->Service master- > Define Service Category
& you can do assignment of cost object ( cost center, project, sales order) with co.code with G/L account in OKB9 t.code and in t.code OBYC account assignment of GBB,WRX with G/L.
***After above you can create Master data as Service master AC03
& the transactions are
A. Create PO ME21N (Acc,assment cat. K or P or C as required and item category D) and enter other detail with service master.
B. Create SES w.r.t. PO in ML81N
C. MIRO w.r.t. SES
D. Payment to vendor in F-53
For more Check the link:
http://sapmm.wordpress.com/category/esm/
Regards,
Biju K

Initial settings required for Made to Stock -10 strategy.

Dear Frndz,
Kindly help me with the step by step procedure to do the initial (SPRO) settings required in SAP PP to carryout the Made to Stock -10 strategy in the system.
Regards,
Srini

Hi,
For MTS, maintaining the Planning Starategy 10 in Mtrial MAster is the Only thing we need to do.
System by default will do the rest of the things for you.
In MD61, system will propose Requirements Type LSF.
Sales Order will be for Inforamtion Purpose.
PIR will be reduced after PGI to the SO.
If you require any specific thing pl. inform.
Regards,
Siva

Spro settings required to do Reservation?

Hi Gurus,
what are the settings required to do reservation?
pls help..

Hi,
you need to check the customization settings in SPRO MM -- Inventory Management and Physical Inventory --- Reservation
Most imp is in OMBK it chould be checked against your t- code

Settings required for including changes in data in a transport request.

Hi All,
I need the settings required for saving ths data changed in a database table into a customizing request.
Kindly let me know the steps involved in the process.
To elaborate:
I have a maintenance screen for a DB table.
Whenever a user creates/changes data to/from the DB table , using the maintenance screem, the data should be saved into a customizing TR.
Regards-
Harmeet Singh,

Hi there,
Any config change will be saved under a transport request TR. Also tables are of 2 types: Customizing table & application table.
Changes / new entry in a customized table are transportable. You will gte a TR when the customized table values are changed / new entry.
But application table entry / changes are non transportable. You willnot get a TR when saving the data.
To know it, go to SE11 --> give the table name --> display --> attributes --> Delivery class. Delivery class A is application table, C is customizing table.
Also some standard tables like MARA, VBAK are not allowed to maintain. If a table is allowed to be maintained, table maintaience allowed is checked in the above.
Regards,
Sivanand

Unable to configure SMTP settings in OATS admin

Hello,
I have installed OATS 9.20 in my pc,when i tried to configure SMTP settings in OATS admin,it is not working and giving an error message "error while sending mail"when i clicked "Test Mail".Can any help me in this?

Hello Jamie,
Thanks for your response
Yes,I have the permission.Actually here there are two systems in which OATS is installed,one of the system OATS 9.01.0157 is installed and in this SMTP settings is working fine.
Thanks,
Sandeep

What customization settings required for automatic availably check,

Dear Guru's
While doing Sales order my availability check should be carried out, but it is not happening automatically, what settings required for the automatic availably check. Pleasantly we are doing it manually.
Regards,
Kalyan

Hi Kalyan,
ATP check requires following configuration setting.
1) The availability check is indecator needs to be switched on at requirement class lavel.
2) The availability check is indecator needs to be switched on at schedule line lavel.
3) Set availability check 02/ 01(individual / daily requirement) in Sales Genral plant view of Material master.
4) Set the checking group in the MRP3 view of Material master.
5) Above all a plant must be assigned to the line item in the sales order.
Please do let me know if you have any concern.
Thanks,
Rupak.

AIRHELP application installation requires local admin priviledge

Hi experts, please help!
I demoed the RoboHelp 9 with Desktop AIRHELP(we need comments) to our users and everything looked perfect, except one issue: every change from the editor, she will need to create a new .air application and someone need to go and install that file to each user's computer, and whoever go to install need to have local administrator's priviledge.
what we want is using the autoupdating function, it will definitely require local admin for each user. I am wondering how you solve this issue? as our IT department would not be happy with this requirement.
Thanks,
Frances

Please see http://www.riaspace.com/2011/08/bundling-air-3-runtime-in-air-desktop- applications/
Air 3.0 allows installation of the AIR Runtime without admin rights but it requires packaging the AIR runtime inside the AIR application itself. RoboHelp AIR Help is an AIR application but the runtime is not packaged within it. There is thus no change for AIR Help. It will still require the separate installation of the runtime and the help and both will need admin rights if installed by the end user.
The help can be installed by a local IT Admin who can push the installation rather than installing it manually on each machine. That is described on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

TS3276 How do I reconfigure Mail to the new settings required by Verizon? If I don't comply by Sept. 2013, my mail service will be interrupted. The following is the message that I received from Verizon:

How do I reconfigure Mail to the new settings required by Verizon. If I don't comply by Sept. 2013, my mail service will be interrupted.
The following is the message that I received from Verizon:
Please update your POP email application’s inbound and outbound server settings as soon as possible to match the new settings below:
Server                    Current Setting                  New Setting                  SSL Enabled               Port
POP3 Server       incoming.verizon.net           pop.verizon.net                       YES                   995
SMTP Server        outgoing.verizon.net         smtp.verizon.net                      YES                   465
TIPS: Depending on your email application, you may need to turn off Secure Password Authentication and, if applicable, make sure your Authentication method is set to “Password” or “Normal password.” In addition, you may need to restart your device for these new settings to take effect and for your email to continue working properly.

On 10.7 (most any other versions should be similar) Mail > Preferences > Accounts > select account > Account Information, and confirm that the Account Type at the top is POP.
If it's currently working and is shown as an IMAP account, then please stop now, and reply back here with that detail.
If the account is shown as a POP account, then update the incoming (receive-path) mail server to match Verizon's message if your current settings show a different mail server, then select the Advanced tab to set the port and to enable SSL, and also ensure that the Authentication setting has "Password" selected...
Now for the outbound (SMTP) path... Back over to the Mail > Preferences > Accounts > select account > Account Information tab, and switch the Outgoing Mail Server (SMTP) selector to "Edit SMTP Server List" item to get to the "outbound" mail settings and select the Verizon SMTP server account from the list shown at the top and select the Account Information tab and ensure that the server name matches what Verizon has now specified, and then select the Advanced tab, select Use Default Ports and check the Use Secure Sockets Layer box.

Do international settings require an admin?

Similar Messages

Maybe you are looking for