Do iPods play MP3 at 64 bitrate or only AAC files????

I still can't get this thing to work but hopefully it will be working soon, but my question is will iPods play 64 bitrate songs or does apple make you convert the files to acc itune files??? If so can you compress acc files to make them smaller so you can put more songs in your shuffle?

Apple says the shuffle will play the folowing files:
MP3 (8 to 320 Kbps), MP3 VBR, AAC (8 to 320 Kbps), Protected AAC (from iTunes Music Store, M4A, M4B, M4P), Audible (formats 2, 3, and 4) and WAV
So, yes, it should play your files. iTunes will encode both mp3 and AAC files as low as 16 kbps, so you should be able to compress them. (I haven't tried it, though.) I would personally perform that compression on the source, instead of recompressing an already compressed file, though.
Good luck
srb

Similar Messages

How to block Firefox from playing mp3 and allow me to save the file

I have upgraded to Firefox v28. I want to save a mp3 file for playing later like previous versions of Firefox. When I click the file it starts playing and does not give me the option to save the file.
In Options the 'application' settings for file type MP3 is set to 'save file'. The quicktime plugin is disabled.
The media.windows-media-foundation.enabled is set to false in about:config
How can I restore Firefox behavior to be like the old versions
Thanks

Try to set the Boolean pref media.directshow.enabled to false as well on the about:config page.
You can also set the browser.altClickSave pref to true and hold down the Alt key when you left-click an MP3 link.

I dunno how to play mp3 in my new mac :( i'm a newbie, pls help!

please tell me how to play mp3 on mac and i got some files transer from my pc, but i dunno how to open it here.. is there any ways to learn how to use macbook? thx alot!

Hi yy7772: This is where the mac excels: to play mp3 files, you use iTunes (included). For all other Mac type quest ions check out this site: http://www.apple.com/support/switch101/
Happy Listening
Stedman

Creative MuVo N2000 doesn't play MP3 files anymore?! HE

Hi everyone,
I hope someone can help me out. Here's the problem.
My MuVo N200 player doesn't play mp3 files anymore.. there's only a strange noise comming from the player if i attempt to play mp3's...he only plays the wma files?! I gave my player to my flatmate so she could here music on her vacation to the US, and that's when the problem started. I never had this problem before, and i wonder if she acidently pushed a buttom she shouldn't. I can't figure out how to fix it. Anyone has a clue what has happend, or if the player is "lost" :-( ?! PS: The player is brand new.
Help is appriciated
Thx Lizzy ;-)Message Edited by lizzard on 08-23-2005 03:45 AM

Unfortunately, NONE of my friends use Windows anymore , even at work we use Linux for security reasons. So what am i supposed to do now... They have a link at Creative that makes you belei've that they support Linux and offer you the possibility to choose the operating system, in other words=Linux. When i told in a mail to Creative Norway that they offer Linux support at their download-site, they actualy had the nerve to tell me that they don't do that!! I told them to remove the choice if they don't offer it, and don't try to tell people that they are eighter blind or stupid, and i pasted the Link + added a Screenshot of the page into the mail!! I realy got upset. It is the last time i by something from Creative. My first player from Creative lasted exactly 2 weeks, after that he stopped working for one odd reason, so i paid a little more in order to get a better one in exchange, and that device didn't li've longer than month eighter?
Not exactly QUALITY we are talking about..aren't we?
What to do, what to do?
Anyone has a clue?

Help!!! - Protected AAC files do not play on any of my iPods

Since ten days ago both my iPods (Video 60GB and Photo 40GB) are not capable anymore to play iTMS purchased music. The music plays fine on iTunes (Windows, last version), is correctly copied on both the iPods (both updated to the last version of iPod software) but when I try to play any of the Protected AAC file kind the iPods just shows the Cover and skips to the next songs.
The bad thing is that is happening on any Protected AAC file i try to play on any of the iPods and we are talking about 527 songs, for a total more than 500 euros. THAT'S BAD!!!
I've tryed everything, re-flashed the iPods with the last iPod Updater (any hint on where to find the 2005 version?), reinstalled iTunes on both the PCs I've at home, deauthorized and re-authorized the iTMS account, deleted all the music from the iPod and loaded back again, no light at all...
I've contacted the iTMS support, they have deauthorized all my PCs, I've authorized them back but nothing. After four email they passed me to the Tech iPod support.
I've called them, on the Video I've also the AppleCare, we tryed everything, also formatting the iPod via the Operating System, but no luck.
At the end they have said that is a problem with the FairPlay authorization and brought me back to the iTMS support.
I wrote them again, explaining all the situation and giving them the SR number and this is what I got as an answer:
"have escalated the issue you reported, and you will receive an email message once we have a resolution. Thank you for your patience as we work to make your experience with the iTunes Music Store more enjoyable."
No timeline, no explanation at all.
Obviusly all the other functionalities of the iPods are working fine and all the Protected AAC files plays fine on iTunes, but nothing on the iPods.
I've also tryed to buy a couple on new songs from iTunes but also these do not play on any of the iPods.
From the tech support side, seems I'm the only one to have this problem in the world. From my point of view this could be a FairPlay keys problem but the result is that I cannot play any of the music I've bought.
Does anybody had this kind of problem or some hints to save the day?
One bottle of italian wine (Brunello di Montalcino, very fine red wine) to who finds a solution.
Have an happy life.
MB from Italy

Nobody replyed to my message but I think that knowing the solution can be helpful for someone in the future.
I've made some extensive testing.
To me the problem has appeared when I've update both the iPod to the last iPod software version, 1.1.1 for the Video and 1.2.1 for the Photo.
At that time I was using the iTunes for Windows version 6.0.4
Thanks to the hint of a user on the iLounge forum (www.ilounge.com), the problem was related to the versions combination between iTunes for Windows and the iPod Software.
Today I've tried all the version of iTunes form the 6.0.0 to the 6.0.4 (thanks to File Hippo) and the only one that works is the 6.0.0
The problem seems solved on both the iPods, obviously I've notified Apple of the temporary solution and I really hope that someone will take care of this one.

PrObLeM WiTh IpOd pLaYiNg ViDeOs WiTh No SoUnD!! HELP ME!!

i have a ipod nano 8gb 3rd generation i just got a couple of weeks ago. i got it, read the directions, got the latest downloads, loaded itunes, put my music, videos, everything on itunes, and connected my i sync all of my music on mai ipod with no problem. but when i sync my videos onto my ipod....THERE IS NO SOUND!! the videos were previously converted before i synced them on the ipod. PLEASE HELP ME RESOLVE THIS PLEASE!!

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
but there are other applications besides MPEG Streamclip you can try as well.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

Just updated itunes on a new mac - doesn't want to play mp3s?

Hi everyone, I just picked up a newish g4 tower and am having trouble with itunes.
the os is 10.4.11 and I did the itunes update.
I tried to download a couple songs but mp3's won't register in the library window. I downloaded 2 m4a files and they both play.
does itunes no longer play mp3's?
Or are all the files I download trash? I'm using limewire and have never had this problem with the old itunes. should I switch to a different fileshare service?
I'm afraid to try to transfer my mp3 library from my old g4!
much thanks to anyone with advice! -CM

Hello and Welcome to Apple Discussions ...
Post in the iTunes Forum for more exposure to your post. The iTunes pros hang out there:
http://discussions.apple.com/forum.jspa?forumID=789
Carolyn

Ipod touch transfers memos as AAC files

Hi All,
I have an iPhone 3G and a 2nd gen iPod Touch.
Using voice memos and syncing them to iTunes, the iPhone syncs the memos as Apple Lossless files (what I have set as my default import setting) and the iPod Touch always imports it's memos as AAC files.
I am using the same microphone and, I believe both the iPhone and the iPod Touch record the files as WAV files. I have not changed and double checked that the settings were the same, in fact, I did back to back testing and syncing. Weird, right?
I really need the iPod Touch to transfer the files either as WAV, AIFF or Apple Lossless because I am using the files for a documentary.
Thanks,
Lydia
Does anyone have a clue as to why it is behaving so strangely.

Voice memo files are recorded as MP4 files (actual extension is m4a). WAV files are not used by Apple. And while you have your CD import preferences set to Apple lossless, I don't believe that this setting is used to handle voice memos.
If you need to convert the voice memo files to another format, there are literally hundreds of programs that can do that for you.

What is the highest mp3 bit rate that Ipod plays without disk problems

I have a 60gig iPod. i note that iTunes can encode to mp3 at a bit rate of 192. Can the 60gig iPod play these files without any disk problems. If it can are there any other considerations?

the current ipod (5th gen) specification says...
Audio formats supported: AAC (16 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3 and 4), Apple Lossless, AIFF and WAV
http://www.apple.com/ipod/specs.html
btw the ipod disk isn't the limiting factor, sound files are played from buffer memory, the disk only runs when the buffer needs to be refilled

IPod won't play mp3 files

Recently had to reset my iPod & reload iTunes incl my whole library. Now all of the mpeg song files won't play on my 80g iPod. They will xfer but won't play. B4 the reset all of my files played. I would convert them to AAC but i have over 11k songs-- i shouldn't have to as the player supports these files. It has played them all before.
The imports setting on iTunes is already set to convert to AAC but it never physically does it. It has never mattered before.
What settings, resets, changes can I make.

wHICH VERSION OF ItUNES ARE YOU RUNNING
yOU MAY NEED TO JUST DOWNLOAD THE NEWEST ItUNES 7
Macbook Pro Mac OS X (10.4.1)

[SOLVED] unable to play mp3 or flac files in mpd, .dts files play fine

I had a perfect running mpd setup before I tried to fiddle around with some dependancies to get xbmc-svn to compile without errors. I installed some AUR packages (ffmpeg-svn, x264-git, libva-sds, libvpx, libid3tag).
After that I started to experience trouble with mpd, it start fine and says it plays audio files just fine but whenever i play a mp3 or flac file the progress bar just looks like it's playing the file but I hear no sound. Whenever I play a .dts file i hear the sound correct.
I'm very curious to why this happends.
I rolled back the packages mentioned above but the issue remains unsolved.
My setup: pc is connected to receiver by hdmi cable using the latest alsa version with digital passthrough over hdmi, currently using mpd-git from AUR
mpd -v --no-daemon shows the following:
# mpd -v --no-daemon /etc/mpd.conf
config: loading file /etc/mpd.conf
listen: binding to address for 192.168.1.3
listen: binding to socket address 192.168.1.3:6600
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: writing pid file
snippet from mpd.log:
Jun 28 00:54 : client: [0] process command "playlistfind filename "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "addid "Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3""
Jun 28 00:54 : add to playlist: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : database: get song: Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "playid "7""
Jun 28 00:54 : playlist: play 7:"Lossy - Tagged and Sorted/Wild Oats/WO-0001 - Kyle Hall - Worx Of Art EP 1 - 2008/Kyle Hall - 01 - Fuse N Me .mp3"
Jun 28 00:54 : decoder_thread: clearing mixramp tags
Jun 28 00:54 : decoder_control: mixramp_start = NULL
Jun 28 00:54 : decoder_control: mixramp_prev_end = NULL
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "status"
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : client: [0] process command "idle"
Jun 28 00:54 : client: [0] command returned 1
Jun 28 00:54 : client: [0] process command "playlistid "7""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : mad: detected LAME version 3.97 ("LAME3.97 ")
Jun 28 00:54 : mad: LAME peak found: 0.000000
Jun 28 00:54 : mad: LAME track gain found: -5.000000
Jun 28 00:54 : mad: encoder delay is 576, encoder padding is 1818
Jun 28 00:54 : decoder: audio_format=44100:24:2, seekable=true
Jun 28 00:54 : alsa: default period_time = buffer_time/4 = 185759/4 = 46439
Jun 28 00:54 : client: [0] process command "plchangesposid "2""
Jun 28 00:54 : client: [0] command returned 0
Jun 28 00:54 : alsa: buffer_size=8192 period_size=2048
Jun 28 00:54 : output: opened plugin=alsa name="My ALSA Device" audio_format=44100:32:2
Jun 28 00:54 : output: converting from 44100:24:2
Jun 28 00:54 : Failed to open mixer for 'My ALSA Device': no such mixer control: PCM
mpd.conf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/media/media9/Muziek/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "mpd"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "192.168.1.3"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "verbose"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# #music_directory "path_to_your_music_collection"
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured #music_directory "path_to_your_music_collection"
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured #music_directory "path_to_your_music_collection"
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,3" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "Master" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
Whenever I run xbmc using the hdmi digital output it just plays mp3 and flac files without problems.
Anyone any clues on how to solve this issue?
TIA, dafart
Since
Last edited by dafart (2010-07-01 00:38:09)

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Which correspondents fine with the
device "hw:0,3"
in my mpd.conf alsa section.
Also sound worked fine withh this config before I started installing ffmpeg-svn and alikes
hokasch:
I tried changing the mixer to "Master" but that did not change much.

I have transferd music from my ipod to my new computer and some of the files are not coming over, i have noticed the m4a files come across but the mp3 do not, any ideas how i can resolve this? thanks

I have just bought a new computer and i am transfering my music from my ipod onto my new computer, I have put the files from the music option from my ipod onto my computer. alot of the songs have come across, however there is alot of songs that havent. I have noticed that the m4a files come across but the mp3 does not. the new computer has windows 8 on it, which is very new to me. when i try and play the mp3 files, it will open them up in a different programme and will not open in itunes. does anyone know what i can do?!?!!?!?!
THANKS

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
BTW this is the iPod touch forum

Problems playing mp3s after installing iTunes 7.1

I installed iTunes 7.1 today. After that, I have problems playing mp3 songs on my iPod (80 GB). The AAC-files play well. The mp3 songs can also be played on iPod via iTunes when its connected to my computer, but when I disconnect from the computer, the mp3 songs starts, and play for about 2 second, and then jumps to the end of the song and stop.
Very thankful for any help.

that's typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Uploading .wav file from ITunes to IPod as mp3

All the cd's I have added to Itunes are in the .wav format to achieve highest quality for playing on my pc or other external systems. I would like to download these file to my Ipod as MP3, but cannot seem to find a way to download and convert without changing the format in my library before I send the files to the Ipod which would leave me with a library of MP3 files.
Any suggestions would be appreciated
Windows XP Pro

I have iTunes set to not update almost all podcasts, because I want the kind of control you're asking for.
To get episodes onto my iPod I drag the ones I want into a playlist that is set to update on the iPod. That way I get exactly the episodes I want, in the order I want them. Essentially, each one of those playlists is radio magazine made out of exactly what I want to listen to, and I don't have to mess with the iPod controls while I'm walking.

Car adaptor to play mp3

I was just wondering if there is an accessory for the X so I can play my mp3 from my phone in the car.
Thanks!

thats what I mean, does verizon have such a thing so i can do that..(i.e. fm transmitter for an ipod or mp3 player) I had my mp3 player and transmitter stolen and was hoping I could just use my X as my mp3 player in the car.

Do iPods play MP3 at 64 bitrate or only AAC files????

Similar Messages

Maybe you are looking for