DO NOT DISCONNECT SCRREN NEVER GOES AWAY!!

Hey i have an Ipod nano, 2 gen i think, 2gb. When I plug it into my computer the "Do Not Disconnect" screen on my Ipod goes up, and even when it's done uploading that screen NEVER goes away, it still charges, but that screen doesn't allow me to listen to my music when it's charging. Can I fix this?

Yes You can fix this easily. First let the Ipod download files from computor(known as sync), once it has downloaded, then click on the nano drive on the desktop, from the file menu click on eject nano or use the apple key(next to space bar) along with the e Key, push these two bottons at the same time. after the nano drive symbol disapears from the desktop, the do not disconnect will be replaced with a charging sybol, and you will then be able to play all tunes on your nano while it's being chared. When the nano is charge it will change the nano display to an electrical plug. Have fun!
(PS) if you need more help, Email me at ([email protected])

Similar Messages

  • Itunes says "update complete" but "do not disconnect" never goes away!

    So, I wait and wait and "do not disconnect" on my ipod never goes away.
    A little history:
    I got my nano a few weeks ago, put a few songs on - everything worked fine. Then, I got a new computer. Since I only put a few songs on, I didnt mind starting from scratch. Now, I can't seem to get it to work!? I have songs in itunes. when i click on my ipod, it shows that i have songs on the ipod, it SAYS the update is complete, my ipod shows "do not disconnect" i wait for ages, and then finally just eject the ipod, and - NO SONGS are on it.
    help please. thanks
      Windows XP Pro  

    Do not disconnect always on, this happens when you have "enable disk use" ticked in the iPod preferences, in which case you have to manually eject your iPod.
    However if you are automatically updating your iPod and do not intend using it as a portable hard drive, you can set your iPod to automatically disconnect.
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if you have your iPod set to automatically sync with iTunes and also have a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
    " http://docs.info.apple.com/article.html?artnum=61135

  • Keeps showing Do Not Disconnect never goes away

    I have a older ipod not sure what it is actully called it is slim and black and 4GB it is not working when I plug it into the computer it just keeps showing Do Not Disconnect and it never goes away.

    Hi Trudy...I had same prob before and you need to download apple's itunes software to be able to access or listen to your ipod...ok good luck! 

  • Splash Screen never goes away

    I'll post this again because a lot of people are having this same problem, but to my knowledge no one has solved it.
    In Compressor 3.5.1, when you load Compressor the splash screen appears but never goes away until you click "About Compressor" and then click on the splash screen, then it will disappear. I have trashed preferences and the problem persists.

    I finally found a fix that helped me out on 2 different problems:
    First was the issue with the green bar appearing on the right side of the frame.
    Second, the Compressor Splash screen never disappeared after it had finished loading. Once you clicked on About Compressor then the splash screen it would finally disappear. This didn't cause any performance issues.
    Thanks to monoschluzz in the following post for the directions to fix this nagging issue:
    http://discussions.apple.com/message.jspa?messageID=10575848#10575848
    Here are the directions he provided:
    Stop all rendering in Compressor. From the Compressor Menu choose "quit all background processing" and close Comressor. Open a Finder window, choose " got to folder " from Finder's "go to" menu and type
    /var/spool/qmaster/
    Done that you're in the "Qmaster" folder. In that folder there are one or more weird named folders (random numbers & characters - i.e. 76646663-DD71D83A)
    Delete that weird named folder (NOT the Qmaster folder itself) and restart Compressor.
    At this point I was able to render clean mov's without nasty green pixels.
    Hope that helps!

  • Software Center icon in system tray never goes away

    Hi
    We are in the process of migrating sccm 2007 to 2012 and noticed the Software Center icon sits in the system tray and never goes away. The system does not have new software available for awhile and the system was also rebooted. We are seeing this on many
    machines. What is the expected behavior? I have attached an image.
    This never goes away.  

    open the software center and look for any applications made available in 'available software' tab. You can hide this window by disabling the setting from Client Settings: Computer Agent\Show notifications for new deployments = "False".
    You can also configure the User Experience\User Notifications configuration setting for the app deployment to "Display in Software Center, and only show notifications for computer restarts".
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: eskonr

  • IPod "Do not disconnect" message never stops

    I get an error message (The iPod "Tubby's iPod" cannot be ejected because it contains files that are in use by another application) when trying to eject my iPod from iTunes and computer. The iPod never appears to be finished with updating even though iTunes software states that the update is complete (“Do not disconnect” message never stops flashing on iPod).
    iPod info: 30GB iPod Video, iPod Software 1.0 (iPod with Video), updated on 11/7/05
    iTunes info: version 6.0.1.3, CD Driver 2.0.4.3, CD Driver DLL 2.0.3.2
    PC   Windows XP Pro  

    I had the same problem and this helped. Hasn't happened again. Good luck..
    http://docs.info.apple.com/article.html?artnum=61135
    Ipod 60gb   Windows XP  

  • HT1339 My iPod classic shows that memory full in "other" category however there is nothing on it. I have left it connected all day and over night trying to restore it but the progress bar  never goes away.

    My iPod classic shows that memory full in other category however there is nothing on it. I have left it connected all day and over night trying to restore it but the progress bar  never goes away. Is it shot or are there other options to restore to factory settings?

    Hi pbworth,
    When troubleshooting issues with iPod classic, it may be helpful to place the iPod into Disk Mode. For information on how to do so:
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Thanks,
    Matt M.

  • Software update that never goes away

    my macbook pro says i have a software update. i press update and it restarts my computer however it never goes away. i have tried several times. please help me figure out how to either update properly or get rid of update alert.

    hailey.o wrote:
    my macbook pro says i have a software update. i press update and it restarts my computer however it never goes away. i have tried several times. please help me figure out how to either update properly or get rid of update alert.
    What is the update?
    Pete

  • HT201401 The red dot on my voicemail icon never goes away. I have no messages, but it will never go away. Any ideas?

    Hi there, just got my new iPhone 4s & the red dot is always on my voicemail icon on the bottom of my homepage. So I check & I have no messages, yet it never goes away. Any ideas, or is it just a glitch in my new phone?

    I just had this problem and this is how I resolved it (with the help of an Apple  tech)
    Go into setings and see if you have Celular Data turned on.
    Settings / General / Cellular - Then turn Cellular Data  to ON

  • Mail is checked continuously. The "thinking circle" never goes away

    The little "thinking circle" right beside the 3g label in the top left hand corner never goes away in my mail app. This just started happening within the past week. This wouldn't be so bad if it wasn't chewing up my battery and bandwidth. Does anyone know why this might be happening or how I can make it stop?
    I have mail set to check every 15 minutes, but it just keeps checking continuously. I check yahoo and gmail accounts.

    My Ipad started doing the same thing this past week(5-6 times,and I am on manual), I tried switching app's and going back and it was still running. I then went to email sent, and after the sent mail was loaded I went back to mail, and it then loaded my new messages. suerte...

  • "Do not Unplug" never goes away

    Our nano continues to say "Do not unplug" even after iTunes says it's done updating. What do we do?

    If you have enabled disk use for the iPod, the do not disconnect message will not disappear on its own; in this case, several ways of ejecting the iPod are described in this article.
    (18779)

  • Do not disconnect message wont go away

    I have the do not disconnect message on my ipod when plugged into my comuter (windows XP). However, the computer says the update is complete. I have reset the ipod several times. Still get the message and when I try and disconnect (by clicking on the ipod icon) it says cannot disconnect because some files on the ipod are in use by other applications or something. Pls help.

    Hi,
    I have been suffering from the same problem, in that I continue to receive a 'do not disconnect' warning on the iPod (4gb nano). iTunes will not eject, nor will windows (as per apple disconnect instructions http://docs.info.apple.com/article.html?artnum=61135).
    I have found that MacAfee is the culprit in my case. I am using Virus Scan 10.0 and it seems to keep open handles on files in my iPod drive (although I don't use that functionality).
    To release the iPod I have to briefly disable the virus scanner:
    * Right click on the MacAfee security center icon in the system tray
    * Choose VirusScan -> Disable
    * After a few second the Do not disconnect disappears from the iPod
    * Right click on the MacAfee security center icon in the system tray
    * Choose VirusScan -> Enable
    I think that MacAfee & Apple need to collaborate to remove this bug.
    Good luck and I hope this works for you.

  • 'Do not disconnect' - syncs never end with my Nano all of a sudden

    My iPod Nano (v1.3.1) syncs happily to my Mac Mini (iTunes v7.1.1) but after the sync completes, the Nano's screen still says "Do not disconnect".
    "Enable disk use" is NOT checked, nor is "manually manage music".
    This is a pain, since I sync my Nano every morning to get a bunch of latest podcasts, and the Mac Mini hasn't normally got a display attached to it. (Watching the Mac Mini means turning the TV on!)
    I've tried the three Rs, with no effect. I think this only happened after the iTunes v7.1.1 update. Is this happening to anyone else, or just me?
    iBook G4   Mac OS X (10.4.9)  

    I am having the same problem and it happened after the update. The only way to safely disconnect my nano from my macbook is to drag the ipod icon to the recycle bin.

  • 'Do Not Disconnect' Doesn't Go Away

    Pretty self explanatory.. When I connect my Nano to my computer now the 'Do Not Disconnect' message keeps flashing... Why?

    hiya!
    when the ipod is connected and showing up in your itunes source list, go "edit > preferences" and have a look in your "ipod" tab.
    are either "manually manage songs and playlists" or "enable disk use" selected? if so, what you're seeing is normal. the ipod will flash that until you eject it in itunes.
    love, b

  • Do Not Disconnect won't go away

    Everything on my iPod 30 gig was wonderful until I bought a new Nano for my granddaughter. To get her started I bought some songs and transferred them using my computer. To do this, I had to change the settings on her "guest" computer to manual.
    I know, I know. I've since called and found out how to set up separate profiles in XP. Cumbersome but it works.
    I've reset my iPod to automatic update and I've finally gotten it to update automatically again. But while my desktop now says "okay to disconnect" my iPod keeps the "do not disconnect" icon until I just unplug it. I've checked all the settings and they seem right. Ejecting does work, but it used to disconnect automatically.
    Any ideas?

    sometimes my ipod doesnt eject when i press the eject button in itunes either. thats when i go into "my computer" and right click my ipod and select eject from there. that usually does the trick.
    chris

Maybe you are looking for

  • How do I get DW8 it to depoy .js files to testing server

    I'm using dw8 and I set up a testing server, how do I get it to depoy .js files there automatically without having to use windows explorer

  • How do I get the the indicator light to work with Voice Mail

    I recently switched to Digital Voice.  I have a Panasonic Phone that has a light that indicates when I have Voice mail.  The light is NOT working when I get voice mail, however I get the stutter dial tone when I have voice mails.  Is there something

  • Key date valuation

    Hi All, The valuation reports which are required in case of forward contracts....is that same as 'key date valuation'. If no, kindly let me know which report to be used. Also, in both cases, what is the accounting entries? regards Sur

  • BEx Analyzer exit variable behaves differently from RSRT

    Hello experts I have an exit variable on a number of queries which is being filled out at I_STEP 1 with different values depending on which query is executed. This is a requirement for a number of reasons and cannot be changed. The user then has a di

  • Best method to move "previous system-users" to the new user folder

    I was doing an Archive and Install of a current 10.5.8 system because of problems with the "usr" folder showing in the root listing of the hd folders while booted from this same hd. I knew that wasn't a good sign. Anyway, it failed saying that the pr