Do not disturb allowing email alert

Any one else having issues with the "Do not disturb" feature allowing email notifications in the midle of the night?
It was working fine until last night...
No changes have been made and I confirmed the settings. I should not alert me.

Thanks Lawrence.
If I used a 3rd party email client for that account, does the iphone's do not disturb mute all 3rd party apps' notifications too? Or does it only mute phone, sms and mail?

Similar Messages

  • Allow email alerts from people that are on the DND bypass list

    Is there any way to Allow email alerts from people that are on the DND bypass list, so that those notificvations still come through as expected?  I can get calls and SMS, but not emails.
    Thanks,
    Andrew

    No. Sorry.  So far as I know, SMS messages should be silenced as well. Only calls from those you've opted to allow are permitted through. SMS messages will not sound a notification.

  • Why is mail not receiving Calendar email alerts?

    Why is mail not receiving Calendar email alerts?

    i have it also
    where is everybody?
    Do I have to go to another site ?

  • I am not receiving new email alerts on iphone 4s. I have powered down and also deleted the email account and reset all notification. I have to manually fetch all emails

    Please help with new emails. I am not receiving new email notification. I have to manually fetch all emails. I have contacted Apple several times. I have powered device all the way down, reset me.com. My me.com account works great on Mac. Please help

    So all email notifications were not coming thru...from any source. Talked to another Apple text and he advised me to shut down the multitask bar at the bottom. So far so good. Seems kind of strange because the problem had only started about a month ago. I've had the phone since August

  • Not receiving subscription email alerts

    Why am I not being alerted by email when my subscribed threads receive replies? My email address is correct, I have set the radio buttons marked "Always subscribe to all topics I create" and "Always subscribe to topics I reply to" and selected "Immediately (default)" from the dropdown box marked "Send subscription emails". Yet I never receive any alerts. :?

    For the past 4 hours Discussions has been down. If the replies arrived just before or after, there may be a lag as the servers catch up.

  • Not getting dac email alerts

    I have setup 2 email recipients in the dac to receive notifications for ETL success or failure, level 5. Both addresses receive the test email when sent, but no etl notifications are received by either. Has anyone seen this problem before, or have any suggestions as to what could be causing this?
    Thanks

    Tried changing the ssl and authentication settings with a DAC restart each time and still have not received notifications of ETL success or failure.
    I asked the email server admin to look and he indicated that he is not seeing anything coming through with the user id that is setup. It appears that it is not even attempting to generate the notification.
    We are getting ready to do a reinstall of our Dev env, see what happens after that I guess.

  • Not receiving email alerts for CPUs

    I have set up my account with all the information and I have checked off the box to receive email alerts for the quarterly CPUs that come out and I am not getting the email alerts. I double checked my account and the box for alerts is checked. Is there anything that I am missing, ir is there any way to test this?

    If you have not received by tomorrow let us know. Also, keep in mind that MetaLink users also receive an alert, so perhaps your co-workers got that one.

  • My ical calender does not send email alerts anymore, now what?

    The alerts are configured correctly, if I look at the alert it says that an email will be send (for ex. 09.00 the day before). However when the moment comes, the email does not. Can anyone help me with this one. This is the case since the upgrade to Mavericks.

    Hi Patrick, I have the same problem as does everybdy else I guess - it just wont work!
    I have set My Card in address book, tested it 100 times and whatever you do it ill not send an email alert? Everything I see on forums blah blahs about setting my card in address book and hey presto but none of it helps.
    Someone MUST know if it will ever work or if it is another issues that apple will never resolve, instead they will just ruin a perfectly nice looking operating system by updating it and making my phone icons and notes / bookshelf etc look like it was bought from Toys R Us instead of an Apple store!
    Did you find a solution to iCal not sending email alerts? DAVID.

  • Not getting email alerts- iPhone 4 with latest IOS 6 and Yahoo

    I noticed recently that I have not been getting email alerts when I receive emails on my iphone/iPad.  I have a yahoo account.  I checked the settings.  The notification shows that alerts for mail are on.  Push is on as well.  I am wondering if there is a server issue with Yahoo?
    The only time I know if I have new emails is if I go into the app itself.  But the app icon will not show me alerts.  I tried deleting the account and reinstalling it. No luck..... Any ideas?

    Anyone else have this problem? Any ideas?

  • Cisco Prime Infrastructure 2.1 not send email alert when link down

    Hello everyone
     I use PI to monitor 1 switch and 1 firewall . When a link up/down on switch , PI immediately sends an email alert .
    But when a link up/down on FW , PI not send any email alert . PI knows link up/down on a FW is a critical alarm ( it's show up on "Alarm Browser") , but not send email.
    I enable all SNMP trap on FW , i tested that event on SolarWinds and it immediately sends an email alert . So there is no problem about FW config

    Causes of Errdisable
    This feature was first implemented to handle special collision situations in which the switch detected excessive or late collisions on a port. Excessive collisions occur when a frame is dropped because the switch encounters 16 collisions in a row. Late collisions occur after every device on the wire should have recognized that the wire was in use. Possible causes of these types of errors include:
    A cable that is out of specification (either too long, the wrong type, or defective)
    A bad network interface card (NIC) card (with physical problems or driver problems)
    A port duplex misconfiguration
    A port duplex misconfiguration is a common cause of the errors because of failures to negotiate the speed and duplex properly between two directly connected devices (for example, a NIC that connects to a switch). Only half-duplex connections should ever have collisions in a LAN. Because of the carrier sense multiple access (CSMA) nature of Ethernet, collisions are normal for half duplex, as long as the collisions do not exceed a small percentage of traffic.
    There are various reasons for the interface to go into errdisable. The reason can be:
    Duplex mismatch
    Port channel misconfiguration
    BPDU guard violation
    UniDirectional Link Detection (UDLD) condition
    Late-collision detection
    Link-flap detection
    Security violation
    Port Aggregation Protocol (PAgP) flap
    Layer 2 Tunneling Protocol (L2TP) guard
    DHCP snooping rate-limit
    Incorrect GBIC / Small Form-Factor Pluggable (SFP) module or cable
    Address Resolution Protocol (ARP) inspection
    Inline power
    Note: Error-disable detection is enabled for all of these reasons by default. In order to disable error-disable detection, use the no errdisable detect cause command. The show errdisable detect command displays the error-disable detection status.

  • TS4510 Do not disturb feature

    I turn on the do not disturb feature but my phone still rings normally.
    Why advertise it and have it on your products?
    What is being done wrong?

    I think your Favorites List is automatically set as an exception list for Do Not Disturb, so their calls will ring through even while your screen is locked (but other alerts are still suppressed).  You can go to:
    Settings > Notifications > Do Not Disturb > Allow Calls From > and see if there's a group enabled.
    You can set any self-made group, your favorites list, or your whole contacts list as exceptions. 
    This could be why your phone is ringing even while the screen is locked. Hope this helps.

  • ASA cannot send email alerts

    Hello,
    I configured ASA to send email notifications. My exchange server is at the same network as the inside interface of ASA but I do not receive any email alerts. I set it to receive informational email in order to receive something to see if it is working, but nothing.
    Should I put a static route or something in my mail server?
    The sender email has to be configured somehow to send emails to asa?

    Apologies if you have done this, but just to double check...........
    Did you configure your exchange server to allow the ASA to send emails via exchange? did you configure the ASA to send emails to the SMTP relay of exchange?

  • My iPad does not ring when locked.  How can I take off the tick in the silence do not disturb

    In the do not disturb box is a tick for silence when iPad is locked.  Therefore I do not know when I am being called as there is no ringing sound.  Can anyone help please.

    If you change Settings > Do Not Disturb > Allow Calls From (e.g. to allow from 'Everyone') then it should still ring if the iPad is locked.
    For the 'Only While iPad is locked' and 'Always' options on that screen, one of those two has to be ticked.

  • Prime Infastructure Email alerts for example via Gmail ??

    Hello,
    I am using PI 2.1. Is it possible to e mail notification also set up a Gmail account? The client environment I have no Exchanche own server.
    Thanks for the help in advance.
    Andre

    Just an update for anyone who may stumble on this issue and have the same problem. In version 1.4 of Prime Infrastructure if you change your virtual domain in the top right and then go to alerts and choose email options you have a completely new list you can set up. Doing this you can do a root folder for a company or district you are providing for and setup email alerts for only that teir and bellow of access. This way they only see alerts from APs and devices they have access too. Meanwhile you can leave the root teir to email yourself and then separate them out via inbox rules as desired.
    This may be possible on older versions of Prime, but I did not notice the email alerts being an option while under the other domains until 1.4.

  • Did not receive confirmation email

    I purchased a phone charger about an hour ago and still have not received a confirmation email. I had checked out as a guest so I cannot check the order status that way and the charge has already showed up on my card. Additionally I had chosen the in store pick up option and am worried I will not receive an email alerting me when I am able to come and pick it up.  Has anyone had something similar like this happen? Is there anyone I can specifically contact?

    Hello hk5791a,
    I'm very sorry to hear that your order confirmation email had not arrived after over an hour. Certainly we strive to provide communications that are prompt and accurate and I very much regret that this was not your experience.
    Using the information you provided when you signed up for Best Buy Unboxed, I was able to locate your order. It appears that you were able to pick it up successfully yesterday afternoon!
    I'm very grateful that you wrote to us about your experience.
    Regards,

Maybe you are looking for

  • Mail rules accidentally deleted all of my emails. How to restore?

    Alright, here goes. I tried to set up af number of rules in my Mail application (just the standard one), that would delete some "subscribtion emails" that I never read anyways. And no, it's not spam. BUT, I accidentally forgot to set the "any" criter

  • In Barcodesample reports are not working REP-1401: 'cf_1formula': Fatal P

    In windows its barcodesample is working fine.(all the barcode constants) In linux 1.I have set the CLASSPATH in reports.sh 2.and I also added the classPath value in <engineId...> tag in the reportservername.confg file. 3.And I restart the report serv

  • Conceptual

    hye guys, what is the difference between PCP and New personnel cost planning and simulation and similarlay what is the difference between "compensation Management " and " enterprise compensation Management " whcihc one to use and for what opurpose th

  • Same format, different content?

    I'm preparing to create 12 DVD masters for duplication. All the DVD's will have an identical format, but different content, and I want them to all behave the same way. Each DVD will have 2 menus, 14 songs with singalong lyrics, and 2 "wallpaper" grap

  • HT4623 how to downgreade ios 6 to ios 5?

    after upgreade to ios 6 facing internet slow and cannot load problem, please help solve this problem.how to downgreade ios 6 to ios 5?