Do not Disturb does not work.

My do not disturb does not work on my iphone 5. I have tried changing to different settings, I have tried putting my phone to silent, turning it on, i have tried allowing calls from no one (always) and also tried switching it to when my phone is locked...the calls still come through...i turned off manual it worked when i tested it out, then i tried it again and the calls were coming through. I've basically tried changing all settings and different possibilities and my calls still come through

That is completely incorrect. The button that you are referring to is the Mute switch, which will turn off particular sounds and just allow vibration. Do Not Disturb turns off all notifications, and can be accessed via the Control Center, or Settings.
Another thing, this thread is 2 1/2 years old, and is from when Do Not Disturb was first introduced with a different iOS. Take a look at the link I provided earlier, and you will see the User Guide. You can read the difference between the activation of the Mute switch and Do Not Disturb.
While it is commendable for you to participate in the ASC, before you post something, make sure you look at the date of a thread, and that you are providing the correct information.
You have posted this incorrect info to three separate threads already, all that are at least a year or more old. WHY?!

Similar Messages

HT5463 hi i have an i phone 4 the do not disturb fonction does not work with?

hi i have an i phone 4 the do not disturb fonction does not work with?

Salut, I have the iOS6 with an iPhone 4 and still the "do not disturb" function doesn't work. I just wanted a bit of peace for a couple of hours this morning, tried this new function and NOPE no dice. My son still managed to get through. So tonight I'll put my iPhone into "airplane" mode as usual to get undisturbed sleep !

HT5463 Does alarm work with do not disturb??

Does alarm work with do not disturb??

https://discussions.apple.com/message/21256836#21256836
From the More Like This section on the right

Do not disturb feature does not work since 1st JAN 2013

Following settings are done
1. Do Not Disturb is Enabled (ON) and hence a moon icon is visible in Status Bar.
2. In Notification, Sort App: By Time is selected.
3. Scheduled is Enabled and time range is set between 10pm to 7am.
4. Allow Calls from: Favorites is selected.
5. Repeated calls is turned ON.
With the above settings, the features was working fine till 31 DEC 2012. 1st Jan 2013, morning 11am I saw, the moon icon was displayed in the status bar. I checked the settings of Do not disturb, there was no change in settings.
Please suggest what's gone wrong. Why this is not working.
Thanks.

Check this out
http://support.apple.com/kb/TS4510

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

My do not disturb schedule will not work

When I schedule a "do not disturb" on my phone (iphone 4s), it does not automatically turn it on. It will only work when the do not disturb is swiped on/off manually. Can anyone help with a solution please?
Thanks
James

I got my Iphone 4s about a month ago. Updated my software to ios 6.0 abot a few days ago. I tryed DO NOT DISTURB option when i first got the phone, and i tried it a few minutes b4 i turned this computer on. My do not disturb still doesnt work. I know this b/c i put my house phone is on the list and when i call my phone (with screen being off or unlocked) the call still comes through and rings! this **** is wack! I've read and set up the correct way as tutorial has said but i still recieve phone calls? Can anyone explain the reason behing that??
Im not having any time scheduling problems like everyone else. ITs me still recieving call, when i dont want them, and the line still rings on the other end??? How come no1 else is having this problem but me??? NEED HELP

DO Not Disturb Feature is not working

Fellow IPHONE users ----
Anybody else having the same issue? I'm trying to use it on my 4s.
Thanks

When I first tested the Do Not Disturb function, I discovered two ways it could seem like it was not working. One, as mentioned above, was that my screen was not locked. The other was the settings under Settings/Notifications/Do Not Disturb. If your settings allow calls from favorites and then you try to test the feature from a phone in your favorites list, it will not block the call. Similarly, if you are testing multiple times and the allow repeated call option is set, the call will also get through.
And one other observation. All of the material I have seen describes the action of the Do Not Disturb function as silencing the notifications. For incoming calls it does more than that; it actually rejects the call so the caller goes straight to voicemail rather than just ringing silently.

"Do not Disturb" feature is not working with iOS6 update in iPhone4

I have updated iOS6 on my iphone 4. I tried to turn on "Do not Disturb" feature, schedule time then test it but it is not working. Phone is ringing with vibrate & tone. kindly fix this bug.

When I first tested the Do Not Disturb function, I discovered two ways it could seem like it was not working. One, as mentioned above, was that my screen was not locked. The other was the settings under Settings/Notifications/Do Not Disturb. If your settings allow calls from favorites and then you try to test the feature from a phone in your favorites list, it will not block the call. Similarly, if you are testing multiple times and the allow repeated call option is set, the call will also get through.
And one other observation. All of the material I have seen describes the action of the Do Not Disturb function as silencing the notifications. For incoming calls it does more than that; it actually rejects the call so the caller goes straight to voicemail rather than just ringing silently.

HT203254 my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Optical DVD drive ejects any inserted disc and does not work!

I can not read or write certain DVDs in my Mid-2009 MacBook Pro since upgrading to Mountain Lion.
I insert an empty DVD-R (Verbatim) and it is being ejected. I insert a recorded DVD-R (Verbatim) and it is being ejected.
I have tried a commercial Video DVD - (Sony) and that one actually did work ... so I am pretty clueless - I can not write any DVD right now.
In the forum I have found many posts regarding this issue under Lion already.
However, my drive used to work fine under Lion and I was able to watch / record DVDs etc.
Now, it is no longer working and I can not use it. Does anyone know how to solve this?
So far I have found the following hints (which did not work for me):
ALL OF THESE THINGS DID NOT WORK:
1) Reset the PRAM (https://support.apple.com/kb/HT1379)
2) Uninstall all virtual machines (Virtual Box, etc.)
3) SMC Reset (https://support.apple.com/kb/HT3964)
some people talk about it being an issue with the 64 bit kernel and that you should try to reboot into 32bit (holding down 32 on startup)
https://support.apple.com/kb/HT3770
others blame it on the UDF format (https://discussions.apple.com/thread/3413998)
There are too many articles in the forums about this - more to make this a random issue.
The most disturbing thing to me is that multiple of the people in these threads contacted Apple and in the end where told, it's probably a bug... now why is this - obviously critical bug - not being resolved, yet ?
https://discussions.apple.com/message/15949663
https://discussions.apple.com/thread/3413998
https://discussions.apple.com/message/5496311
https://discussions.apple.com/message/17628953
https://discussions.apple.com/message/17885393
https://discussions.apple.com/message/18521761
https://discussions.apple.com/message/18331901
https://discussions.apple.com/message/17215345
https://discussions.apple.com/message/15185260
https://discussions.apple.com/message/15585199
https://discussions.apple.com/message/19049195
https://discussions.apple.com/message/18767233
https://discussions.apple.com/message/16875193
the list could probably be continued, but I'll leave it at this

I also had the same problem shortly after upgrading. My optical DVD drive ejects any disk I put in. This started about 2 months ago.
I just got back from the Apple store, after setting up an appointment, and they told me that my life is horrible because my MacBook Pro is no longer under warranty as of 32 days ago. This is really BS.
However just like any other company that treats me with poor customer service I just take my future business elsewhere and make sure not to recommend them to any friends and family - as well as tell them about my horrid experience.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Itunes does not work me in the pc

itunes does not work me in the pc, it gives me an unknown error 0x80090330

I "fought" for more than three months with a problem concerning the iPhone 3G. The operator did not introduce any amendments, and the error was corrected in time with the new software provided by Apple.
This time, Orange is also not able to improve anything. It seems that only Apple can do something about it.
On the Polish forum for Apple products, is a topic devoted to this problem.
http://myapple.pl/iphone-rozmowy-ogolne/150531-w-iphone-4-orange-rozmowca-nas-ni e-slyszy.html
Paste link in order not to be groundless.
Once again, I will describe exactly what the problem is.
During a conversation in a 3G coverage, I no longer hear the caller at a time when 3G coverage is lost and there is a change to the Edge.
By about 10 to 15 seconds the caller does not hear me. Once again, this time the caller hears me and the conversation can be conducted smoothly on Edge.
I would add that in other phones, as well as the iPhone 3G, switching from 3G to Edge is smooth and without any disturbance - the same network.
Message was edited by: Reaper123

BB desktop for Mac Does not work Curve and G5 OSX 10.5

The RIM software simply does not work very well. I will keep it to update software, but as a product to sync my data between my BB and my 2 macs, it simply does not do what is needed.
Sync did not move the Address Book groups data over. The groups moved to the BB, but the groups were empty. Most of the address book contacts did have the group information in each file, but I could not filter by group as each group was empty. Also, a disturbing number of entries were duplicated, with the duplicated entries missing the group information.
The sync from the iCal application did not seem to go very well either as I received error messages on my Mac.
I am disappointed that RIM would not have a 32 bit version available for OS 10.2 - 10.5 and a 64 bit version for 10.6
I am surprised and disappointed that RIM would release a product with less functionality than the Mark/Space offering, and have a lack of bluetooth syncing.
I have gone back to "The Missing Sync" as that product does work and their support is very good. Unfortunately I had to play around with setting up a test account with no data in iCal and Address Book to zero out the errors that the RIM product put into my BB. I then had to do a second overwrite, this time with my main Mac account and my iCal and Address Book data.
My BB is back to running and syncing, but not on the RIM software.
I hope that RIM will revisit the Mac software and provide a product that answers the needs of the Mac community.

Hey Everyone,
You may find some useful information in this article http://bbry.lv/9y2tHa
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade. Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
Good luck.
david

"Do Not Disturb" Not Working

HelloI
I have a iPhone 4S and My wife have a new iPhone 5C.
Yesterday, we were testing "DO NOT DISTURB" feature in new iOS 7.0.6 and Unfortunatelly, it failed !!
When we are activating "Do Not Disturb" mode, it's working for Notifications (Whatsapp sound alert, Message alert, etc.) But when we tried calling on each other's mobile number, it's was ringing in stead of making it silent at the first attempt!
I am aware that within 3 minutes, If the same caller is calling me or her on again on the same mobile number from the same mobile number then it will start ringing. But we tried it, with the distance of 5 minutes everytime. I am really disappointed with the failure of the system at that time but I also thought that I might missing something because of what it is ringing.
Request you to please help me out and let me know, how does it works actually !
Awaiting for your assistance.
Regards,
Darshan Chhag

Using Do Not Disturb
Most likely it is doing exactly what the user has configured it to do.

Do not Disturb does not work.

Similar Messages

Maybe you are looking for