Do Not Disturb doesn't allow notification banners to show when unlocked

Do not disturb used to work perfectly fine. All my notifications still came up but was completely silenced, as is the purpose of DND.
But now no notifications show up when i'm actually using my phone, leading to me not seeing notifications for at least an hour. Also, when on DND with my phone locked and I received a notification, it would make my phone wake up, but now I have to manually wake up my phone to see notifications.
I use an iPhone 5S running iOS 8.1 and I have never encountered this problem before. How do I fix it?

ducky fresh wrote:
I am having the same issue as pzalazar. DND should silence the phone, but still show the text preview in the lock screen. Since the update, the text previews for DND assigned text messages no longer show on the lock screen. They also do not show a banner notification as they used to. You have to manually check the text messages to be notified of any new texts.
Again, according to the manual, when the phone is in DND mode, it does not light up in anyway. You're not supposed to be notified of anything. As I don't use it very much, I don't know what it used to do. I can only say that I'm seeing the behavior described in the manual. And, if they put it in the manual, I would assume it's working the way they intended.
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Similar Messages

HT5463 I'm using my iPhone for my wedding ceromony music will do not disturb also stop game notifications ?

I'm using my iPhone for my wedding ceremony music will the do not disturb stop all game notifications coming through ? Thanks in advance

You might want to just put it in airplane mode as well.
I know DND does not block calls/notifications if the phone is actively being used (not in standby). I haven't experimented, so I'm not sure whether it will consider the phone "in use" if the music player is actively playing.

Do not disturb doesn't switch off in 2013

Do not disturb doesn't switch off out of the scheduled period in first morning of 2013. (With GMT+8)
Anyone is having the same issue?

I made some tests and this issue will fix itself on Sunday January 6, 2013. It will happen the first few days of January 2014 (until Sunday January 5, 2014) if the bug is not fixed. Most first few days of most years seem to have this bug. The bugs starts on January 1st (based on the From time under Scheduled) and is usually fixed on the first Sunday of the year (except if the first day of the year is a Sunday, then it is fixed on the second Sunday). Years preceding years where the first day is a Sunday are not affected by the bug.
Let's check the next few years, this is the pattern :
2013 : Issue fixed on Sunday Jan 6
2014 : Issue fixed on Sunday Jan 5
2015 : Issue fixed on Sunday Jan 4
2016 : Issue not happening even though first day is a Friday
2017 : Issue fixed on Sunday Jan 8 (Jan 1st is also a Sunday)
2018 : Issue fixed on Sunday Jan 7
2019 : Issue fixed on Sunday Jan 6
2020 : Issue fixed on Sunday Jan 5
2021 : Issue fixed on Sunday Jan 3
2022 : Issue not happening even though first day is a Saturday
2023 : Issue fixed on Sunday Jan 8 (Jan 1st is also a Sunday)
2024 : Issue fixed on Sunday Jan 7
Etc...
The same pattern happens if you go back in time as well.
Note : If DND is scheduled before midnight, then the issue and the fix (see above) are delayed one day since it's based on the From time under Scheduled.

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

Do Not Disturb doesn't work!

New iPhone 5S
iOS 7.0.1 (latest)
Do Not Disturb does NOT work! It still lets in calls. I have tried all the settings to no avail. Even selecting block every call, all the time, the moon icon is showing, but the calls still come through!
What the?! Come on Apple... this is not rocket science. I've embarassed myself in public settings because this easy feature is broken!

I think you are correct. Page 31 of the manual says:
Do Not Disturb
Do Not Disturb is an easy way to silence iPhone, whether you’re going to dinner or to sleep. It keeps calls and alerts from making any sounds or lighting up the screen.
Turn on Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap . When Do Not Disturb is on, appears in the status bar.
Note: Alarms still sound, even when Do Not Disturb is on. To make sure iPhone stays silent, turn it off.
Configure Do Not Disturb. Go to Settings > Do Not Disturb.
You can schedule quiet hours, allow calls from your Favorites or groups of contacts, and allow repeated calls to ring through for those emergency situations. You can also set whether Do Not Disturb silences iPhone only when it’s locked, or even when it’s unlocked.

Why won't Do Not Disturb automatically enable at set times (and disable) when set in Notifications?

Can anybody tell me? It worked fine until yesterday.

Welcome to the Apple Support Communities
It's a bug that will be fixed tomorrow, but I hope that Apple fixes that because it will happen next year

Web form doesn't allow text entries and showing smart lists

Hi,
I am using Hyp 11.1.2 and facing 2 issues with webforms .
One of them is a cell under Account dimension should accept Text Value , which is allowing numeric only. I am able to enter text but not getting saved , showing an error msg that invalid entry..etc. Also I found everymember in outline is numeric. Even if I refreshed the Text type member with data type Text , it is still showing numeric in Outline.
Second one is even If defined a smart list on another member under Account, the cell is not showing it.
Is it relevant setting Evaluation Order or any thing else?
suggestions appreciated
Thanks in advance

The Text member like Smart List will be based on the evaluation order which for Classic is set by carrying out the following - http://docs.oracle.com/cd/E17236_01/epm.1112/planning_admin_11122300/enum_dim.html for EPMA - http://docs.oracle.com/cd/E17236_01/epm.1112/epma_admin/epma_data_type_eval.html
Checking the Essbase outline is not an option because the text information is all stored in the planning relational repository (table HSP_TEXT_CELL_VALUE) and the numerical value associated with it is stored in essbase.
Cheers
John
http://john-goodwin.blogspot.com/

COMMAND LINKS IN TREE TABLE DOESN'T ALLOW CONTEXT MENU TO SHOW UP

I have a tree table with some columns, the "nodeStamp" facet has a column
which has the tree with an image and a command link. when i try bringing up
the context menu from anywhere on the table including the image the context
menu comes up fine. But when i try bringing up the context menu from the
command link it doesn't show/come up. Also it doesn't throw up any exception.
I have my code used as shown below.
Can anyone please let me know what could be the problem?
<af:treeTable var="step" id="lpexec34" rowBandingInterval="0"
columnStretching="blank" width="100%"
value="#{pageFlowScope.loadPlanExecutionDetailBean.relationships.loadPlanSteps
binding="#{pageFlowScope.loadPlanExecutionDetailBean.richTreeTable}"
initiallyExpanded="true">
<f:facet name="contextMenu">
<af:popup id="lpeStepsPopup" contentDelivery="lazyUncached">
<af:setPropertyListener
from="#{pageFlowScope.loadPlanExecutionDetailBean.relationships.loadPlanSteps.
rowData}"
to="#{rowStepData}"
type="popupFetch"/>
<af:menu id="lpeStepsContextMenu">
<af:commandMenuItem text="#{bundle.mark_as_complete}"
id="cmei0b"
actionListener="#{pageFlowScope.loadPlanExecutionDetailBean.actionPerformed}"
rendered="#{rowStepData.markAsCompleteRendered}">
<f:attribute name="lpiStepLog"
value="#{step.loadPlanInstanceStepLog}"/>
<f:attribute name="loadPlanInstance"
value="#{step.loadPlanInstance}"/>
</af:commandMenuItem>
</af:menu>
</af:popup>
</f:facet>
<f:facet name="nodeStamp">
<af:column headerText="#{bundle.lp_steps_header_stepsHierarchy}"
id="loadPlanexecDetail_hierarchy">
<af:panelGroupLayout id="pledetail_pg10">
<af:image source="/resources/images/loadplan/#{step.elementType}.png"
inlineStyle="margin-right:3px; vertical-align:middle; height:16px;
width:16px;"/>
<af:commandLink id="lpcl0_lpe" text="#{step.name}"
action="#{pageFlowScope.loadPlanExecutionDetailBean.relationships.stepClicked}
">
<af:setPropertyListener from="#{step}"
to="#{pageFlowScope.lpElement}" type="action"/>
</af:commandLink>
</af:panelGroupLayout>
</af:column>
</f:facet>

Hi,
try setting partialSubmit=true on the command link. Just in case it fires the action method before the context menu displays
Frank

Internet Explorer 11 doesn't allow downloads and intermittantly crashes when I try.

Hello,
I have Windows 7, 32 bit on a Dell laptop with 4Gb of RAM. I've been primarily an IE user all along but I am now using Chrome and Firefox due to problems with IE 10 and 11. Around the first of the year IE stopped letting me download anything
and sometimes crashes after the download bar says "filename could not be downloaded". I have googled my fingers off and tried every remedy suggested, up to and including booting in safe mode with networking and running IE with no add-ons.
My only assumption is that one of the MS updates is the underlying cause as I haven't made any hardware or software changes. Any assistance would be greatly appreciated. Below is the text of one of the crashes from the technical details of the
reliability monitor of the action center:
Source
Internet Explorer
Summary
Stopped working
Date
?2/?9/?2015 1:05 PM
Status
Report sent
Description
Faulting Application Path: C:\Program Files\Internet Explorer\iexplore.exe
Problem signature
Problem Event Name: BEX
Application Name: iexplore.exe
Application Version: 11.0.9600.17496
Application Timestamp: 546fddcc
Fault Module Name: StackHash_a7aa
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: a7aa
Additional Information 2: a7aa91f17ea749d42a4de3b390fa5b3d
Additional Information 3: a7aa
Additional Information 4: a7aa91f17ea749d42a4de3b390fa5b3d
Extra information about the problem
Bucket ID: 165922217
TIA

Hi Mikem,
This is typically due to incompatible add-ons or toolbars or an incompatible display adapter. Internet Explorer uses the graphics chipset for hardware acceleration and these issues might happen due to an older and/or incompatible driver.
Since you mentioned that you have tested under safe mode with no add-ons mode, we wonder if the problem still persists under safe mode. And when Internet Explorer not crash, did you get any message, error or the download just prompt won’t popup.
We suggest you remove all third party add-ons and temporarily stop Anti-Spyware, update your display driver then reset Internet Explorer Settings for good measure.
If resetting IE or removing Add-ons does not resolve the issue for you then it could be a compatibility issue with the Graphics card.
Under Internet Options, click the advanced tab. Under 'Accelerated Graphics', click on the checkbox next to 'Use software rendering instead of GPU rendering*'. Ensuring that it is checked, click on OK. Close Internet options.
How to remove add-ons in Internet Explorer
http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-11
Regards
D. Wu

Automatic download doesn't work on some purchased shows.when trying to download purchased season pass tv shows in SD i can't get button to work only shows HD

Automatic download works on some tv show and not I have go to store and go thru them one at a time to download it. It also tells me there are to downloads avail when really there are. Also when i've purchased a season pass on SD I try clicking on the SD button but it does't work. Ive downloaded show for yrs this problem just started. Please help

I have the same problem, just showed up recently - very fricking annoying!!

Thumbnail image is not the same image as the picture that shows when opened

When I look at a thumbnail image in iPhoto and then I click to open that picture a different picture appears on the screen and the thumbnail image is not opened. It's almost like they are both within that image, one appearing in the thumbprint and one in the full image. So if I want to print a thumbnail image I can not find it and if I want to see what is in the folder some don't show in thumbnails. I think this happens when I transfer from my iPhone to iPhoto and I have deleted some pictures from my phone before the transfer. The deleted ones I see the thumbnail image of but they are not there when images are opened, and the pictures they override are not there when I try to find them in the thumbnails. I am only having this problem in two of the iPhoto folders that I have. I have a large iPhoto library.

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window rebuild thumbnails and if needed repair permissions and if necessary rebuild your database
LN

Do not disturb- text message

Hiya, ive just updated to IOS6 for my iphone 4s, my do not disturb is not working ive googled instructions and done them but its still not working.
settings--> do not disturb --> toogle is "on" --> notifications --> manually / time
however when some1 sends me a text message or gives me a call no matter if i set to manually or time it still provides a sound.
can anyone please help.

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
More Info Here > Using Do Not Disturb
http://support.apple.com/kb/HT5463

HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

Do Not Disturb and Notifications
Push notifications appear in Notification Center and alert you to new information, even when the
associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
a numbered badge on the app icon on the Home screen.
Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
following options in Settings > Notifications > Do Not Disturb:
• Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
• Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
from your Favorites list or other Contacts groups you define. For information about Favorites,
see Chapter 25, Contacts, on page 100.
• Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
their Caller ID) calls you twice within three minutes, iPhone will ring.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

HT5463 Do Not Disturb Unable to activate

I've tried all possible variations and nothing. I went to Notifications> Scheduled OFF>Allow Calls from NO ONE> Repeated Calls OFF. Back to Settings> Do Not Disturb ON> Dial my cell from my Home number, and it still rings! Can anybody help?My

Do Not Disturb and Notifications
Push notifications appear in Notification Center and alert you to new information, even when the
associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
a numbered badge on the app icon on the Home screen.
Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
following options in Settings > Notifications > Do Not Disturb:
• Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
• Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
from your Favorites list or other Contacts groups you define. For information about Favorites,
see Chapter 25, Contacts, on page 100.
• Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
their Caller ID) calls you twice within three minutes, iPhone will ring.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
turn notifications on or off for that item. Apps that have notifications turned off appear in the Not
In Notification Center list. Chapter 33 Settings 133
Change how notifications appear: Go to Settings > Notifications. You c

Do not Disturb does not work.

My do not disturb does not work on my iphone 5. I have tried changing to different settings, I have tried putting my phone to silent, turning it on, i have tried allowing calls from no one (always) and also tried switching it to when my phone is locked...the calls still come through...i turned off manual it worked when i tested it out, then i tried it again and the calls were coming through. I've basically tried changing all settings and different possibilities and my calls still come through

That is completely incorrect. The button that you are referring to is the Mute switch, which will turn off particular sounds and just allow vibration. Do Not Disturb turns off all notifications, and can be accessed via the Control Center, or Settings.
Another thing, this thread is 2 1/2 years old, and is from when Do Not Disturb was first introduced with a different iOS. Take a look at the link I provided earlier, and you will see the User Guide. You can read the difference between the activation of the Mute switch and Do Not Disturb.
While it is commendable for you to participate in the ASC, before you post something, make sure you look at the date of a thread, and that you are providing the correct information.
You have posted this incorrect info to three separate threads already, all that are at least a year or more old. WHY?!

Do Not Disturb doesn't allow notification banners to show when unlocked

Similar Messages

Maybe you are looking for