Do not disturb feature does not work since 1st JAN 2013

Following settings are done
1. Do Not Disturb is Enabled (ON) and hence a moon icon is visible in Status Bar.
2. In Notification, Sort App: By Time is selected.
3. Scheduled is Enabled and time range is set between 10pm to 7am.
4. Allow Calls from: Favorites is selected.
5. Repeated calls is turned ON.
With the above settings, the features was working fine till 31 DEC 2012. 1st Jan 2013, morning 11am I saw, the moon icon was displayed in the status bar. I checked the settings of Do not disturb, there was no change in settings.
Please suggest what's gone wrong. Why this is not working.
Thanks.

Check this out
http://support.apple.com/kb/TS4510

Similar Messages

Verizon email; Thunderbird client; Not working since 3/25/2013;server name change

Yesterday, 3/25/2013, I noticed that email wasn't working from my thunderbird client. After a day of assuming that the problem existed elsewhere, I found on this site where it says to use POP.VERIZON.NET, port 995, and SMTP.VERIZON.NET, port 465. After grumbling why didn't I hear about this name change?, I changed them. At that time I noticed that the PORTS were wrong, too. They'd been right, and now, not. Most confusing. I changed them. Each account has CONNECTION SECURITY SSL/TLS and NORMAL PASSWORD.
But: when I try to connect, I get: An error occurred during a connection to pop.verizon.net:995. You have received an invalid certificate.....Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate...."
I am at a loss. What's wrong, other than that email seems to be choking on security?
Solved!
Go to Solution.

Found in another post where a person said the INCOMING.VERIZON.NET and OUTGOING.VERIZON.NET did still work, so I tried it, but still got that Certificate error. Found someone else who said they had to say 'no connection security' before it would work, and so I tried that -- and it did.
Not thrilled about this, but the client is working again.

My scanner (Epson V300) does not work since mountain Lion upgrade.

My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!

Try trick #5, at > Eight amazing Image Capture tricks | Macworld

HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning? Has always worked for me with my Epson scanner.

The remember me dialog box does not work since I upgraded to OS 10.10.1 and Safari 8.0

The remember me dialog box on various web sites does not work since I upgraded to OS 10.10.1 and Safari 8.0

Try running the combo update.
10.9.2

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

Downgrading the iOS is not supported by Apple.Have yo tried:
- Backing up and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
- Go to the OverDrive support site

HT4623 My sounds for such things as Netfix, or ABC Shows, etc does not work since last update. How do I fix that?

Sound not working since last upgrade. Get no sound with Netflix or ABC, NBC,etc. worked fine before last update.
How
do I fix this?

Hey Janetna5,
Thanks for the question. Does restarting your iPad help the issue?
Restarting your iOS device
1. Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
2. After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
via iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If not, is it possible that your side switch is toggled to mute sounds? See this resource for information:
Volume buttons and the Side Switch - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9940e758
Mute notifications, alerts, and sound effects. Slide the Side Switch toward the Volume buttons.
The Side Switch doesn’t mute the audio from music, podcasts, movies, and TV shows.
Thanks,
Matt M.

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

IChat Video Not Working since PSP3 bought!!

Hi guys,
ichat video not working since I bought and installed a new Playstation 3. I have a BT HUB that connects wirelessly with the imac. I have BT Vision running from the HUB too via ethernet wall boost adapters. I had this problem with video when i installed the BT Vision. And turned out to be something to do with Application Sharing settings on the HUB. I resolved it by correctly sharing AIM TALK with my wireless imac. Now the same problem has arisen since the psp3 was put on. But even with all the things I've tried I am stuck as how to get the video up and running as before. The devices running off the hub include:
1. imac (wireless via Airport Extreme)
2. BT Vision via ethernet and wall adaptors
3. iPod touch via wireless
4. PSP3 via wireless plug and play
I have checked all the ip address for these devices and have enabled app sharing for the imac wireless to AIM TALK in BT HUB manager. I have also opened my firewalls; changed the port setting to 443 in ichat preferences; re-set the HUB/Router;
Is there anything else I can do or check? As I said it worked perfectly before the psp3 went onto the
network. Should i assign AIM TALK to the imac wireless or to some of the other devices? (though I think I've tried that too!!)
Help would be much appreciated as this is driving me to insanity, if I wasn't there already!!!!
Take care, and thanks in advance for your help.
Baz, Belfast, Northern Ireland, Europe!!

"speedtouch modem!"
Yes you do.
Thomson-Alcetel who make the Speedtouch range make this device for BT.
The Firmware is Thomson-Alcatels with BT Logo-ing.
This Ethernet 3 connection is probably internal.
Have you got System Preferences > Quicktime > Streaming set to 1.5Mbps ?
If not then do and restart iChat to see the new speed.
In Leopard the Automatic setting is read by iChat as 384K.
This may be allowing the PS3 to have too much of the bandwidth.
I or rather my son has a X-Box 360 which can be on-line when I video chat and it works for me, as it does when he uses his PlayStation 3
If the AIM talk setting uses the same port here as it is listed elsewhere then it has only opened/allowed port 5190.
This would have appeared to have been coincidental to any iChat use when you changed it.
Are you not using UPnP in this device ?
Which firmware is it up to ?
Anything above 6.2.2.6 should work.
Anything starting with 6 and containing letters is later.
In the .telephony section does it mention which port are open ?
9:00 PM Sunday; May 11, 2008

Drag and Drop not working since last software update

Drag and Drop not working since last software update - this is occuring on Outlook for the mac and I just tried moving an icon on the doc and the same thing occured. YOu can drag but the items will not drop.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

IPhone 4 alarm not working since 01.01.2011

iPhone 4 iOS 4.2.1 alarm not working since 01.01.2011. Tried different settings such as turning off automatic update and changing location. Nothing seem to be working. Any solution?

Same for both mine and my wife's iPhone 4 4.2.1. Her work woke us up. I found a short fix while testing it out. If you setup a repeat alarm for the day you want it to go off it works. I don't know why but it works, if I don't set the repeat the alarm does not sound. Hope it helps some people but Apple... Fix it please!

Googlemaps will not work since I downloaded latest version of Firefox. Any suggestions? I've followed all of the troubleshooting suggestions at Googlemaps already and no luck. Thanks.

Googlemaps will not work since I downloaded latest version of Firefox. Any suggestions? I've followed all of the troubleshooting suggestions at Googlemaps already and no luck. Thanks.
== URL of affected sites ==
http://maps.google.com/

From here it looks like you used Safari instead. Lots of choices that's what I like.
You did end Firefox and try to restart didn't you?
If you did then I would expect you have a problem with your Firewall, and would have had it before, does not affect IE, it does affect Firefox, I don't know about other browsers. See
http://kb.mozillazine.org/Firewalls

IChat not working since iOS 5 update

My iChat is not working since the iOS 5 update. Everytime I go to log in it says: "iChat can not communicate with the AIM account..." Is anyone else having a problem since the new update was released?

Hi Chris,
Does it read login.oscar.aol.com in the server Setting tab ?
(iChat Menu > Preferences > Accounts > Server Settings)
Hi bryanfromcottonwood,
In Previous versions iChat was set up to automatically change the Server Name fro AIM logins when starting or turning Off SSL. (it tended to look like the leading "s" appeared or disappeared).
IT Changed from login.oscar.aol.com to slogin.oscar.aol.com
There are suggestions that this does not happen now.
It is not known if this is done deliberately for "Security" or an error in the Update file.
6:57 PM Friday; October 14, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Where can i exchange my not working iphone bought in Switzerland (on july 12, 2012.) that just turned off and not working since. In croatian store they don't want to give me replacement phone!!!!

I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support

“the EU is considered one country for warranty purposes“
Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
Some how you need to get your phone back to Switzerland.

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Do not disturb feature does not work since 1st JAN 2013

Similar Messages

Maybe you are looking for