Do not execute - Maintenance Order ??

Hi,
There is an option before Release of MAintenance order called 'Do not execute ' , can we click that option if anyone have generated wrong maintenance order by change or by doing worng scheduling of Maintenance Plan. I think this option is for the same.
Any suggestions.
Thanks
DM

Hi,
Yes, you could use that option.
You just need to be aware that the function cannot be reversed.
-Paul

Similar Messages

Plant Maintenance Schedule Calls not creating Maintenance Order

Hi,
I have created a maintenance plan that is schduled on a weekly basis. This worked fine initially but now calls are not being generated and therefore no orders are also being generated. The process I used is:
1. Create Equipment
2. Create Task List
3. Create Maintenance Item
4. Create Maintenance Plan
5. Schedule Maintenance Plan
Can you help?
Also can you tell me which program you use to create orders for an entire maintenance planning plant, I know IP10 can be used for maintenance plans? For example you schedule your maintenance plans but I assume a periodic job must run to actually create the orders

Hi Gary,
I had an issue with calls not being generated and was browsing similar issues when I came across yours. I note that you also asked how you could create orders for a whole maintenance planning plant.
This can be done by using the sort field on a maintenance plan. You need to define sort fields (config) for the maintenance plans for each of the plants required and then insert them on each plan. You can then use the sort field as a selection when scheduling.
Hope this helps.
John

CM21 / CM33 does not display Maintenance Order requirements

Hi Gurus!
My client has an issue. He would like to display the pending requirement on a work center - both MO and PRD. is there a way to do it?
Thanks!!

Hi,
Check for following --
1. Maintain all the standards first in the work center category 0005
2. check your time profile what u have set as default.
If you do this you can get the evaluation results
reward points if you find it useful to you.

Report for Maintenance orders-Plant Maintenance

Dear all,
I have some maintenance orders, in that i have done cost settlement for few orders through KO88.I want to take a list of settled and not settled maintenance orders.
Is there any standard SAP reports or any way to findout setlled /not settled orders.
Thanks in advance
Guna

Hi,
you can use the T code S_ALR_87013015 - List: Actual Debit/Credit in this you can specify the order group or use multiple selection for orders and excute you can find which order got settled and which order has balance. if it is helpful pls reward me with points
regards
satish

Maintenance Plan - Tasks are not executing in the order they were created

I've created a new maintenance plan to perform differential backups but the tasks I created don't necessarily seem to execute in order all the time. These are the tasks and order assigned when I created the plan using the Maintenance Plan Wizard:
Back Up Database (Differential)
Clean Up History
Maintenance Clean Up Task
Here's the deal...When it executes in the order they were created (above), all my old backups are deleted successfully. However, there have been instances where, for example, the Maintenance Clean Up task executes before the
Clean up History task. When this happens, only one of my backup files is deleted successfully but not the second (I have two .bak files needing to be removed). Furthermore, I noticed that the backup that wasn't deleted when it should
have gets deleted at the next increment when new backups are created.
Again, this does not happen when the tasks run in the sequence shown above. Only one old backup gets deleted (instead of two) when one of the above item is out of sequence. Strange behavior to say the least.
Any feedback on this will be appreciated!

If you do not set up precedence constraints it runs all tasks at the same time.
Please see "8. To define a workflow between tasks:"
http://msdn.microsoft.com/en-us/library/hh710041.aspx

While creating Maintenance order using t-code iw31 mainwork center not pick

Hi,
while creating Maintenance order using t-code iw31 Maintenance work center not picking from drop down (already have in drop down)but giving manually accepting.
--Ganesh

Hi,
My understanding is that the selected work center is not copied into the input field. This can be corrected with note [1451299|https://service.sap.com/sap/support/notes/1451299]. Check if the note is relevant for your system.
-Paul

Service/maintenance order type SM01 not completely maintained in plant 1001

Dear All,
Am trying to configure Service Management where there is a scenario in which , when the user creates a Sales order for a installation item say TV or Fridge, automatically Service order has to be generated.
I have checked all the item Category Settings but am getting an error
Service/maintenance order type SM01 not completely maintained in plant 1001
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Can anyone throw some light on this as i know you would have faced this problem.
Satish

Nothing

Service/maintenance order type SM03 not completely maintained in plant 1000

Dear experts,
when I use T-code:iw31 create a service order,It show the following error message:
Service/maintenance order type SM03 not completely maintained in plant 1000
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Best regards,
Lance

Hello,
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
Maintain the order type SM03 against the plant.
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
These both should be done, try to raise the SM03 order now.
PRase

Purchase Requisition created from Maintenance Order can not deleted

Hi Gurus,
I've create a Maintenance Order for External Service (Control Key: PM02) and Purchase Requisition already created related to this Maintenance Order.
But when I want to cancel/delete the Purchase Requisition, there is error message "This item is only deletable via the associated production order". So II can not delete the PR.
Any solution for this problem ?
Regards,
Tri W

Hi,
If the PR has not been approved and no PO has been created yet, you have to delete the external service operation (PM02) in the work order. This should delete the Pruchase Requisitions.
Regards,
Joey

Services for Object in Maintenance order can not link

Hello,
"Services for object" in Maintenance Order can not link to share point.
Linking documents from the C drive or Global drive is successful but if SHAREPOINT is used, it fails
When trying to link to a Word document on our Sharepoint... It fails... when I'm in an order... it gives me an error... (displayed on the attached Word file...) and when I'm working within a document... (CVN02) it merely links to my C:\ drive which won't work...
We need to link to our "master" Sharepoint (web based) documents.
Please suggest the solution.
Thanks
Regards
Anil

Anil,
Couldn't you add the web address as the attachment?
Regards
Narasimhan

Not Required Main Work Centre on Order Header Maintenance Order

Hi Experts,
I want to know about main work center on order header maintenance order. Standart SAP is main work center required, and i want to set main work center on order header is not required. How Can i set Main Work center on order header is not required?
Thank you experts for the answers,
Best Regrads,
Bernardus Jalu
Edited by: bernardus jalu on Jan 17, 2012 8:46 AM

Hi
Main workcenter is the responsible workcenter in a order and is used as a reporting selection criteria in major reports(IW38/IW39/IW28/IW29/IW68/IW69 etc). From it also the responsible cost center gets derived. Also it gets copied to the Performing workcenter fields of each operations. So why you dont wants it to be used. It can be maintained as master data in technical objects & gets copied to notifications/orders while creation
Shakti
Edited by: SHAKTI BEHERA on Jan 17, 2012 3:41 AM

Price not copying from contract to maintenance order in IW31

Hi Gurus,
I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
Thanks in advance!
Best regards,
Karun Kumar

hi
i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
regards
thyagarajan

Maintenance Order is not settling

Hi Seniors - While settling the maintenance order, error is coming "Settlement rule is not distributed". Its working for some order types and for some its not working.
Kindly assist me in finding the right node where these settings are maintained. I am unable to figure out...
Thanks & Regards
Manmohan K Bajaj

Hi
Are there more than 2 settlement receivers in the settlement rule?
if yes, you need to maintain a % allocation between the two
Regards
Ajay M

PR not in table generate with maintenance order

Hi gurus,
I have a problem about maintenance order service external generate to PR(Purchase Requisition)
on External Tab. service Number already insert but material Group, Recipient, Purch. Group is blank and saved. so PR Number auto generate. but, i was check PR is not in table, like below.
Generate PR is done but cannot be updated, because in table EBAN is empty.
where is PR number ?
thank u,
SaifudinHajar

Hi Sundar,
the order already released,
i means why PR is generated but in table EBAN, is empty?
thanks,
Hajar

PM Order Set status Complete "do not execute"

Hi experts,
i am searching for a fm to set system status of service order to complete do not execute. Can someone help me?
Thx

this FM will bring the status of the order:
tj02t will have status text..
tj02 will have the status..
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.

Do not execute - Maintenance Order ??

Similar Messages

Maybe you are looking for