Do not get chartBuilder to work on NT

Does anybody successfully installed chartBuilder
on NT and Oracle817 ?
Who can help. I got the testjdbc.jsp to work
but thats it.
Can anyone help or give a more clear
Howto for installing it ?
Thanks in advance
Peter S.

Hi Peter,
There's no need to install it. Just download chartbuilder Kit.
Add chartbuilder.jar to your classpath and start working on it.
If you have any more issues then feel free to contact me on
[email protected]
Hope this helps,
rajat

Similar Messages

I could not get ExportPDF to work. Something about a network error when trying to sign in.

I could not get ExportPDF to work. Trying to convert a pdf to a Word document. Got an error message. Something about a network error when attempting to sign in.

Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

Can not get wiki to work

Hey there,
I have been trying to set up Leopard server for over a week. I can not get DNS, Open Directory and Wiki to work for me. This is my 5th instal. The first attempt, I went with standard thinking that the ease of use would be an asset, but then after getting it going I realized that there was no FTP access with standard, which was not an option.
INSTAL 2: I reformatted and went ahead with the advanced server this time around. In no time I had FTP; AFP; iChat and web services running fine. Then when I went to set up wiki i realized that I had to have DNS and Open Directory running before that would work. I guess that I should of read up on that one... I had actually created all of my users and groups in local directory which seemed to work fine for ftp; afp and ichat for a few days but I really wanted to get the wiki going.
INSTAL 3: I reformatted, set up DNS (or at least I thought I did) Open Directory and then recreated all of my users and groups in Open directory. I quickly got afp running; then ftp and ichat (jabber) with no issues. But when I went ahead with wiki, I could not get it to work properly. I could log into the wiki from my LAN using the local domain name that I had chosen but could not get it to work when I would attempt to do it from home using my dyndns.org account which forwards to my office IP which is mapped through router port 80 to my servers local IP. When doing this I was taken to: http://myurl.dyndns.org/groups/workgroup/
I got the message:
"Not Found
404: No group with that name (workgroup) hosted on this server"
If I click on "Groups" the error goes away and I see my wiki group but if I clicked on it I would get:
"Not Found
404: No group with that name (marcato) hosted on this server"
When I went back to the office I could still get at my wiki by going to my local url: minserver.local and then selecting groups and then clicking on the desired wiki and then logging in. I then tried to accessing it using the machine's local IP since that is essentially what is happening when I come in from the WAN side using my dyndns.org account. So i typed in its local address and got the 404 error. When I click on groups again, just like when I was home coming in over the WAN, I get the same message. Why would I be seeing the group but not able to log in to it. Why would it allow me to access and use the Wiki from the LAN using miniserver.local but not using the machine's static Local IP address?
I then decided to go watch all of Sean Collin's videos on Leopard Server in oder to get a handle on this.
INSTAL 4: Walked through everything with Sean's video up to getting DNS set up. It failed! At this point I was frustrated so I decided to throw in the towel on Advanced. I got out my old tiger installer and set up ftp on another older G4 and then went for INSTAL 5. This time I reverted back to Standard, got all of the services running fine but as soon as I got home I ran into the same issue with the wiki. I could not access it from outside of the Office LAN. I went through and opened every port recommended and still nothing. Then, in efforts to try to make it work and in frustration of the limitations of the Standard interface I upgraded the configuration from standard to advanced to see if I could get to the bottom of this. I went back to reading a bunch more stuff about Mac Server and found the Sudo Changeip -checkhostname. It gave me the proper IP of the server as well as the proper hostname but said that the DNS was not working properly and needed to be repaired. I tried a few hacks I found online but still could not get the DNS going properly
I am not sure what to do now. In an ideal world I would love to get leopard Advanced running properly so that I could host the wiki, afp, ftp, and ichat (jabber) from the same machine. But no matter what I try I can not seem to wrap my head around DNS. Even if I could do it with Standard and keep the ftp on the old mac with tiger... This is frustrating since I feel really confident with setting up everything else, I just do not seem to be able to get DNS to work properly which I assume has to do with the problem with the wiki not working from the WAN.
Can someone please help me here?

I have tried a bunch of hacks to try to get things working and still nothing. I actually find that the server is running really slow now so I am clearly going to be starting from skratch again. I will wait for some advice before I proceed. Here is what I have set up:
1. I made a fake url using dyndns which routes to the IP address of the router at work. I want to be able to use this address to access the wiki from WAN
2. I have the following ports opened and assigned to my servers LAN address:
On TCP 113 113 10.0.1.22 Identification Protocol
On TCP 88 88 10.0.1.22 Kerberos
On TCP 106 106 10.0.1.22 Mac OS X Server Password Server
On TCP 25 25 10.0.1.22 Mail service smtp
On TCP 123 123 10.0.1.22 Network Time Protocol (NTP)
On Both 311 311 10.0.1.22 Remote Server Admin / Workgroup
On TCP 22 22 10.0.1.22 SSH
On Both 3283 3283 10.0.1.22 Server ARD
On Both 5900 5900 10.0.1.22 Server VNC ARD
On UDP 500 500 10.0.1.22 VPN
On UDP 1701 1701 10.0.1.22 VPN
On TCP 1723 1723 10.0.1.22 VPN
On UDP 4500 4500 10.0.1.22 VPN
On UDP 170 170 10.0.1.22 VPN L2TP
On Both 80 80 10.0.1.22 Web Server on Mini
On TCP 625 625 10.0.1.22 Workgroup Manager
On TCP 21 21 10.0.1.22 ftp
On Both 8443 8443 10.0.1.22 iCal SSL
On Both 8008 8008 10.0.1.22 ical server
On TCP 5190 5190 10.0.1.22 ichat Server
On TCP 5220 5220 10.0.1.22 ichat Server
On TCP 5222 5222 10.0.1.22 ichat Server
On TCP 5223 5223 10.0.1.22 ichat Server
On TCP 5298 5298 10.0.1.22 ichat Server
On UDP 5190 5190 10.0.1.22 ichat Server
On UDP 5297 5297 10.0.1.22 ichat Server
On UDP 5298 5298 10.0.1.22 ichat Server
On UDP 5353 5353 10.0.1.22 ichat Server
On UDP 5678 5678 10.0.1.22 ichat Server
On UDP 16384-16403 10.0.1.22 ichat Server
On Both 7777 7777 10.0.1.22 ichat Server file
On TCP 5269 5269 10.0.1.22 ichat Server to Server
On Both 5109 5109 10.0.1.22 istat for mini server
On Both 16563 16563 10.0.1.119 pc
On Both 8086 8086 10.0.1.22 wiki server
On Both 8010 8010 10.0.1.22
3. I am not sure what is meant exactly by a fully qualified domain. From what I understood in Sean's Collin's videos was that this was a url that I was to make up on my local network and that putting the . at the end made it FQDN. I choose: miniserver.local. Am I totally missing the mark here?
Here are the parts of the set up where I am really confused:
a. When setting up the server with Server Assistant, when it asks for Primary DNS and computer name. What am I supposed to put in here? I read one post that recommended that quiting the set-up assistant before this point and doing it manually?
b. Once I get through the assistant and launch Server Admin, and sign into it using the servers local IP, get into DNS and go to add zones, I am REALLY CONFUSED.
- I add my primary zone, What is the primary zone? What do I enter here? What about the name server? I do not understand the difference between these 2 things.
c. Then I go to add my A record for the machine. What should its Machine name be? the same as the primary zone?
What is the easiest way to get through this? I know that once I this is set up and I can get the wiki to work over the WAN that I am not going to have any problems with the rest. I don't even want to bind the computers to the server if I don't have to. I know that for ichat (jabber); afp and ftp that this is not required since every time I have attempted to get the server up these services worked every time without the binding.

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

How do I extend my WiFi with Airport Express? I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work.

I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work. I have tried to get it into my network and it get connected via the WiFi but not the Ethernet. Also when it gives a green light I cannot see that it is giving any signals to my devices (iPhone etc).

You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
Now in the AirPort utility you should see your iPhone connected to the AirPort

I just bought the BDP-S1500 yesterday and can not get it to work via wireless

I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

Hi BigDaddy317,
Please the link below for further assistance in connecting your wireless device to the internet.
https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
Please let us know if you're getting the same result or the error messages that you see.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

Contact itunes support. Click Contact Us at the bottom of this page.

HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

I have a hdmi dock connector and can not get it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

With what apps? Not all apps require video output.

Can not get message to work om iPad, Can not get message to work om iPad

Can not get message to work on iPad

Please be much more specific. What exactly happens when you try to send a message?

I previously had Thunderbird, when I changed internet providers, I could not get Thunderbird to work. Now I am with Gmail, and it's nowhere as good as Thunderbi

How can I get thunderbird to work on my computer with hughes satellite internet. Previously, I had thunderbird, but when I switched to hughes.net, I could not get thunderbird to work. Please help?

<blockquote>
I could not get thunderbird to work.
</blockquote>
Can you be a little more specific about your problem?
What were you doing?
What happened?
What were you expecting to happen?

I can not get NETFLIX to work, does anyone have any suggestions.

can not get NETFLIX to work, does anyone have any suggestions...
I have downloaded and installed Silverlight..
and uninstalled it and reinstalled it...
I have called Microsoft and also called Netflix support..
who advised me to call Microsoft.
Microsoft advised to to call apple
seriously?
HELP!

Have you tried a different web browser like Mozilla FireFox?
Have you tried just restating your Mac?

I can not get reader to work on xp.

I have installed the 9 on Reader and can not get it to work. I installed Fixit to see and it does not work either. Is there a place on XP that needs to be checked or opened. This started after the the computer was attacked by virus and they got into the registry. Had this repaired and this is what makes me think something is not opened for readers to work. Any ideas out there.

chuck59c wrote:
I have installed the 9 on Reader and can not get it to work. I installed Fixit to see and it does not work either. Is there a place on XP that needs to be checked or opened. This started after the the computer was attacked by virus and they got into the registry. Had this repaired and this is what makes me think something is not opened for readers to work. Any ideas out there.
Sounds like your sytem didn't get repaired. I would take it back to the tech that worked on it.
In the meantime, you haven't mentioned what happens when you try and get it to work so we have no syptoms to go on to help you. Plus, what is fixit?
There is no place on XP that you need to do anything special to get Reader to work so again, sounds like your system is still hosed.

HT4528 just bought a ringtone app but can not get it to work

just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
Angela

Contact the app developer for support.

Do not get chartBuilder to work on NT

Similar Messages

Maybe you are looking for