DO NOT install this driver for Sound Blaster Audigy SE, or Sound Blaster Audigy Va

I have two creative products that work fine under xp. But since installing vista my sBli've platinum doesn't work at all, i find out that creative are no longer supporting this card for vista. Fair enough... So I'm waiting for the SB audigy driver update and behold I read that i shouln't install the driver for my other Sound Blaster card, Audigy SE.
what are creative trying to do? does'nt look like a well run company.
And from what I've read what is the point of getting a card that is suppoted by the new driver as other people seem to be complaining that this new driver doesn't enable all the features as under Xp.

If I am right your Audigy is the first Audigy (EMU0k2) soundcard that was launched by Creative Labs. You need the drivers for the audigy series. For driver/application updates: Latest downloads Audigy Platinum
For a proper install, you may use the tools Driver Cleaner or Driver Sweeper in Windows Safe Mode to clean up the older drivers that are left in the system which can cause the problems you are having now; you can find these tools at Guru3D (under 'General Utilities').
After that You can install the drivers including the software/applications by using the install cd which is supplied with your Audigy soundcard, and then install the driver updates manually afterwards.
Or you can try out the new Daniel_K's driverpack (software/applications included, install cd not needed): SB Audigy Support Pack 2.8.000EQ (08/22/2008)
Good luck!
Message Edited by CTman on 09-23-2008 05:38 PM

Similar Messages

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

I can not install any driver for any print to my laptop.

I have been trying for months to install a driver for just one printer and we have five or six printers.
My problem is that every time I install a driver it fails and rolls back, everytime. It would just about completely finish installing before rolling back.
My laptop is a Windows Vista Home Premium Service Pack 2.
PS: There were three other users before me that was using this laptop. I know all three of them and none of them know much about computer. So I tryed to clean out all the junk out of it.
I got a little more info for however reads this post. The error that I recieve has no number or error code it just says "Fatal error during installation," but it also has in the title bar this "C:\Users\Justin\AppData\Local\Temp\7z1763\Setup\..\Setup\hpzprl01.exe, which seems like it might help.
Hope that helps.

I figure out what my problem was. Here is what I did: I recheck all of my services and startups. If you need help I'll layout steps for you. Just reply that you still need help.

Windows 8.1 will not install the driver for Officejet 6310 All-in-One

Have downloaded the driver from the HP website, but it will not install. The download wizard "detected a problem with the driver software" but did not say how to resolve it. The option to download the software was still available, so I did that anyway. When attempting to execute from my hard-drive, extraction occurs, followed by a delay, and then a message that reads "This application has requested the Runtime to terminate it in an unusual way". This is in an error box headed "Microsoft Visual C++ Runtime Library". Can anyone help please?

Hi AB-Comp,
Welcome to the HP Forums! I understand that your are seeing the error The download wizard "detected a problem with the driver software". I am happy to help you with this issue! I have some questions for you:
What Operating System are you using? Windows or Mac? What version?
Can you make copies with the printer?
How is the printer connected? Wireless, Ethernet, or USB?
Is the power cable plugged into a surge protector or directly to the wall outlet?
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can not install this update for kb2667402 windows 7 professional. I tried various fix-it but it did not help Update KB2667402 failed with error 80004005

I'm not sure where to turn now and am soooooooooo frustrated! I have been trying to get security update KB2667402 with error code 80004005 to install for a couple months without any success.
So, I finally turned to microsoft tech support... Case# 1186572463
On Fri. Oct. 26 I was on the phone with a microsoft tech for over 3 hours. The tech that took remote access of my computer said she did not know how to fix my problem and that my case would have to be escalated to a higher level and that I would
receive a call back on Mon. Oct. 29th. However, I never got a return call.
Yesterday - Tues. Oct. 30th I called in again and was on the phone for 4.5 hrs with a microsoft tech and he also took remote access of my computer but was not able to fix the problem. I asked to speak to someone at a higher tech level and was told to call
back into the microsoft helpline.
The 3rd call - Although I had been told during the prior 2 calls that I was still covered under my warrenty I was now told that I needed to pay for the support call. It took a while to get that straighteded out and to give all my information again to
the call center but I finally worked with a 3rd tech for over 2 hrs. but had to terminate the call for a conference call I had with a client. The person I worked with said he would call me back between 7-8pmEST so he could continue helping me but I never
got a return call.
I have already invested over 10 hrs in the last few days regarding this issue and fear that if I call back in I will once again start over completely with no success which is why I am reaching out here. Is there anyone that has the knowledge of how to fix
the problem?

I've been having the same problem and today did some searching and found something that worked. Check that the download hasn't already been installed - look in the Installed Updates listing for an entry. If it exists there, uninstall it, and
then force a Check For Updates and retry the install. This worked for me and I hope it helps.
Good day, Chuck.

Can not install ATI driver for Satellite 1900 notebook

i have the sattellite 1900-203 and i downloaded the winxp driver but every time i try to install it it say
(setup can not copy the fileati2mtag.sy_) any1 has any idea?
how can i contact the technical support ?
thanx

Hi
It will be interesting to know which driver you have downloaded exactly. Is this driver given by ATI or designed by Toshiba?
I dont know in which country you live but on this page you can find the right address http://www.toshiba-europe.com/eu/contact/details.asp?group=By+Country .
Bye

Can not install WXP driver for WLAN card on my Satellite A200-14D

i have a problem with wireless driver for win xp
i installed win xp and the only problem is the wireless lan driver
help me please

What you mean it does not work? Can you install WLAN card or not? Is your problem WLAN card installation or you can not establish WLAN connectivity?
Please write a little bit more. Is so bad to write few sentences more and describe what happen exactly. Is there any error message or what?

Not installed the driver for the printer HP DESKJET 2050 J510

I'm trying to install the drivers for the printer, but the step "connection to the printer" windows it just does not see. If I try to connect the printer without drivers, Windows gives an error message. (shown on screenshoot)

Hey @jmchich ,
Thanks for your post on the HP Forums!
I would like to apologize first off that I am not able to read the screenshots as this is the English HP Forum Support Board. I see you speak english, if are able to translate that message into english or switch your computer language that would be greatly appreciated.
Look forward to hearing back from you!
I worked for HP.

It says "can not install the driver: could not find media for this driver"

I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says "can not install the driver: could not find media for this driver", how ever i get a beep for every error message. In my device manager there is no UAA and in services.msc windows audio is started.
I have tried almost everything on net but not able to solve this, plz help.

vendor wrote:
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
jutapa

I have an early 2008 iMac running iOs 10.5.8. I need to upgrade to at least iOs 10.6 snow leopard in order to install the driver for a new HP Office Jet Pro 8610 printer. How do I go about doing this, and which version of 10.6 would be best?

I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?

Click here and buy the DVD.
(115929)

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

[SOLVED]Installing it87 driver for lm_sensors support

Hello,
I've done much research on how to properly install an update it87 driver that could make 0x8620 work.
I ran sensors-detect and ran into this:
# sensors-detect revision 6209 (2014-01-14 22:51:58 +0100)
# System: Gigabyte Technology Co., Ltd. Z97X-Gaming 7
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found unknown chip with ID 0x8620
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): y
# DMI data unavailable, please consider installing dmidecode 2.7
# or later for better results.
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Found unknown SMBus adapter 8086:8ca2 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively): y
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no):
Created symlink from /etc/systemd/system/multi-user.target.wants/lm_sensors.service to /usr/lib/systemd/system/lm_sensors.service.
Unloading i2c-dev... OK
Unloading cpuid... OK
So I did some research and found that this was updated and available as a potential driver for my MOBO:
http://www.lm-sensors.org/wiki/Devices
You will see the IT8620E which covers the unknown chip lm_sensors found.
I downloaded the file, extracted it and tried to do a
sudo make
but I ran into an error because it was looking for
KERNEL_BUILD := /usr/src/linux-headers-$(TARGET)
which is NOT in that directory. I installed the linux-headers and saw that it adds files to
/lib/modules/3.19.3-3-ARCH
. I modified the Makefile and it got past that part but it ran into another error during
make install
After much frustration I looked and saw
usr/lib/modules/3.19.3-3-ARCH/kernel/drivers/hwmon/it87.ko.gz
so now I'm questioning if I even need to install this driver or if I need to update it. Is there a way to learn more about these drivers that come in the linux package?
I can't find anything concrete on how to make this work. I'm just trying to add my fan speeds and other junk to my conky!
Edit:
modinfo it87 gave me this result:
filename: /lib/modules/3.19.3-3-ARCH/kernel/drivers/hwmon/it87.ko.gz
license: GPL
description: IT8705F/IT871xF/IT872xF hardware monitoring driver
author: Chris Gauthron, Jean Delvare <[email protected]>
depends: hwmon-vid,hwmon
intree: Y
vermagic: 3.19.3-3-ARCH SMP preempt mod_unload modversions
parm: force_id:Override the detected device ID (ushort)
parm: update_vbat:Update vbat if set else return powerup value (bool)
parm: fix_pwm_polarity:Force PWM polarity to active high (DANGEROUS) (bool)
So, this tells me that this driver does not cover 8620.
Last edited by SirMyztiq (2015-04-10 06:23:31)

Update:
I believe after some researching and actually going for it that I managed to install the it87 test driver.
I modified the Makefile on this line:
KERNEL_BUILD := /lib/modules/$(TARGET)/build
And when it failed on this line:
SYSTEM_MAP := /boot/System.map-$(TARGET)
I did:
sudo cp /proc/kallsyms /boot/System.map-`uname -r`
Because Arch doesn't put this file there because it isn't needed to boot...I think.
Either way it finished and I was able to use the lm_sensors.

Cannot install LAN driver for my "KT6 Delta Series" motherboard

I've got this motherboard (KT6 Delta Series). Bought it second hand recently and I haven't got the original MSI driver CD. I downloaded all the drivers from the MSI website (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1) but I'm not able to install the driver for my onboard LAN.
I just get a yellow dot on the ethernet controller under unknown devices in my device manager. When I try to update driver from device manager by searching the folder where I unzipped the driver, I just get a message saying something like "no driver could be found for this device in the selected folder... will you connect to Windows Update to search for a driver...?". I've also tried to install it the hard way by selecting "from floppy disc" and browse for the "b44win.inf" file inside the "WinXP" folder in the unzipped driver folder... but I stilll get an error message... saying something like "can't find any information of the hardware in the selected folder"... it's a bit difficult for me to describe the messages correctley because not English Windows version.
I've downloaded both LAN drivers for this card from MSI download site (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1). Both "Broadcom 5788 LAN Drivers" and "Broadcom 4401 LAN Drivers" and non of them will install on my system. I've also tried downloading from the Broadcom website (http://www.broadcom.com/drivers/downloaddrivers.php). NON of them will install (
I've just formated my harddrive with fresh Windows XP install... The only software already installed is drivers for my motherboard and AGP card. No other software that can make any conflicts. When I connect a network cable to the onboard LAN the yellow light goes on so it seems the card itself is working.... but where can I get a driver that will install???
I've also tried connecting another network card (realtek 10/100) and connected my ADSL internett through it... and used the MSI Live Update utility... but still no luck... the only network driver it gets is the one for my reltek card :-(
Any suggestions???
I use Windows XP Professional SP2. How do I install the drivers for my onboard LAN???
Best regard.
Tor-Atle Kindsbekken

Quote from: osnavi on 05-November-05, 20:02:09
"...so my onboard Broadcom 4401/5788 controller thinks it is a 3COM controller instead of a broadcom controller..." Think it shouldn't be possible since basic data should be written in a kind of ROM. Now, if that could happen, it should be possible to reverse it the same way you did to overwrite that data.
I belive you are right... but I can't reverse it the same way I did when overwrite the data... because I'm not able to install the driver :( I cannot install the driver at all in Windows XP. In Windows ME it's possible to force the installation of the driver... but it does not work. It moves from unknown devices to network controllers... but it gets a yellow dot... and is not working. Every time I boot Windows ME I get a message reporting that something is wrong with the broadcom ethernet controller :(
I belive the only way I can reverse it is to replace my harddrive with another... with Windows XP and drivers for my card is already installed on the harddrive... the same way as I did when overwriting the rom file(s) with data from my Asus board... but I can't make such a harddrive when the drivers won't install on my card :(
I maybe think this also has happend to the onboard Audio controller... and maybe the chipsett also :( The audio controller works perfectley eith the MSI C-Media drivers... but when I run MSI live update... I get drivers for the C-Media device... but also drivers for "VIA AC97" audio controller can be downloaded from the MSI Live Update Utility... The "VIA AC97" is the audio controller on my Asus board... so I belive it has happened here also... and maybe also to the "VIA 4in1" chipset... but this is the same "VIA KT600" chipset as on my Asus board. When updating my Via 4in1 driver, I just get an option to update the inf file. But normaly on "Via 4in1" drivers on other boards I know, there shold be installed drivers for PCI, IDE and AGP. Is it the same way for you guys with this motherboard? Is it only the "Inf file" to update for you guys also?
What I think is most frustrating here is that things like this cab happen. This can happen to everybody. Many times I've switched harddrive from one computer to another... and I've never experienced anything like this before. This time I was not planing to boot the harddrive at all... just format it... but forgot to set the right boot order... so the harddrive booten... and that's all it takes to "destroy" my board. Shouldn't these ROM files be a littlebit more difficult to overwrite, you think? Why doesn't MSI writeprotect their ROM files or anything... to make them a littlebit more difficult to destroy...?
Well... I'm still interested in advices on how to "restore" my motherboard data to the original values... and remember... clear CMOS and update BIOS is not enough :(

I have a compaq 6200 pro i can not find the driver for SM bus controller.

I down graded the 6200 pro with the i3 chip to winXP and now I can not find the driver for the SM bus controller does this system have a sm bus controller?

Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

DO NOT install this driver for Sound Blaster Audigy SE, or Sound Blaster Audigy Va

Similar Messages

Maybe you are looking for