Do not like updated ICal because the day and times are too faint to be read.

Since update of ICal, the numbers (day of month and time of day) are too faint to be read.  Can this be fixed?

There are no setting to change that right now. You may try to increase the contrast of your display while working with iCal
     System Preferences -> Universal Access -> Seeing
in the Display section adjust the "Contrast" slider.

Similar Messages

  • I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

    I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
    Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
    I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
    I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
    I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
    Please can anybody help.
    Cheers,
    Dan_nz.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • HT2513 I can barely see the day and time numbers in ical - any suggestions?

    I can barely see the day and time numbers in ical. I have tried adjusting contrast but doesn't help. Any suggestions?

    Could be corrupt plist try deleting com.apple.systemuiserver.plist
    found here  by using Finder>Go>Go to Folder (command shift G):
    copy and paste:
    ~/Library/Preferences/ com.apple.systemuiserver.plist
    delete this plist.
    now open terminal (Applications/Utilities/terminal.app) and paste the command:
    killall SystemUIServer
    and return. This command will kill the process and MacOS X will automatically rebuild the menu bar, clearing out old cache. Quit Terminal.
    Restart if neccessary.

  • How to change the day and time seen on the calendar

    Hi.
    I am a bit confused as to how to restrict the day and time shown on a calendar.
    The ical help says this:
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
    Anybody got any ideas?
    Thanks
    David Tobin

    OK, but what did the help menu mean when it said..
    To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
    To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
    To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
    This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
    Have you any idea how to achieve this, as i don't see the popup menu suggested with...
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    I am confused!!
    Any other ideas?
    David Tobin

  • How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

    how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

    Hi JN and Barry,
    Barry wrote:
    The second case may not be included in the available D&T formats in Numbers 3
    For my region, the Date & Time data formats include month.
    The Date Pop-Up
    This may not be the case for all regions.
    Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
    Regards,
    Ian.

  • How can I add the date at the top of the screen along with the day and time display?

    Hello,
    How can I add the date at the top of the screen along with the day and time display?
    Thanks so much!

    Open System Preferences>Date & Time:
    Ciao.

  • My computer will not let me type my password or move the mouse even though the date and time are changing and it's making a spinning noise what do I do??

    My computer will not let me type in my password or move the mouse but the date and time are changing and there is a spinning noise what do I do!!???

    Meredith199,
    does your MacBook Pro have an Eject key (⏏) in the top-right corner of the keyboard? If so, does pressing Control-⏏ show a restart/sleep/shutdown dialog box?
    If you press Shift-⌘Q, does your MacBook Pro recognize that as an attempt to log out?

  • I know the day and time of a conference call that took place b/w 2 Verizon customers and a 3rd party but it is not reflected in either phone record. Why?

      I am an attorney with a law firm that is involved in litigation where the date and time of a 3 way call that took place in June 2009 between an attorney at my firm, a broker, and the broker's client.  The broker and broker's client are both Verizon Wireless customers.  I have their phone records for June 2009.  I am 100% certain a three way phone call took place between the attorney in my firm, the broker, and broker's client.  However there is no phone record that shows a phone call between all three individuals. . 
    The first Verizon Customer is a local real estate broker with a West Palm Beach, Florida  phone number with a 561 area code.  The other Verizon Customer is the broker's client and was in CT on both 6/24 and 6/25.  The broker's cell phone records were reproduced by Verizon in 2014. I believe the client's cell phone records were reproduced by Verizon in 2013. The client has an 860 area code.  The law firm is in Palm Beach County with a 561 area code.  Any phone call from the law firm to the broker would be local and would only show up on the broker's cellphone record.  Any phone call from the law firm to the broker's client (who was not a client of the law firm) would be reflected in the law firm's long distance records.  There is no such phone call.  The broker's cell phone records show a 10 minute phone call between the broker and the law firm at 2:24 p.m on 6/24.  There is a 8 minute phone call from the broker to the law firm at 9:39 am on 6/25 and a 22 minute phone call from the law firm to the broker at 9:48 am.  The broker's cellphone record shows that during the 9:48 phone call the broker attempted to perform a 3 way call with the client at 10:04 and again at 10:05. Each attempt lasts just 1 minute and neither shows up on the client's cell phone records.  The phone call with the law firm and broker lasts an additional 4 minutes.
    The broker's and client's cell phone records show a 10/11 minute phone call on 6/25 depending on the record at 8:41 am.  There are numerous other phone calls between the broker and client on other days.   
    If the broker called the client then called the law firm, then the initial phone call should be reflected in both Verizon invoices, and the 2nd call should be reflected in the broker's record.
    The same would be true if the client initiated the phone calls.
    If the broker called the law firm or law firm called the broker, then called the broker's client the phone call should be reflected in the law firm's long distance records and the client's records.  It is not. There is no documentation that shows the client was participating in a 3 way call.
    My question is why not?   Alternatively, is it possible for the 3 way call not to be reflected in the records?  I have the phone records of both customers. I also have the invoice number for the broker.  How can I find out if the broker added the client to any of the above calls. 

        Hi papal74. I am sure that this is a situation in which these call records are extremely important. In order to provide additional information about these call records we would need to speak with you personally. Please give us a call at 800-922-0204. This way we can get down to the bottom of this.
    ErinW_VZW
    Follow us on Twitter @VZWSupport

  • Bug: when you have two or more reminder pop-ups on BB10, you can't edit 2 or more of them because the second and beyond are lost...

    I notice that when you have two or more reminder pop-ups on BB10 (tasks, calendar, etc.), you can't edit 2 or more of these because the second and beyond get lost and will never pop-up again.  

    Hey JVanB,
    Thank you for your feedback.
    To better understand your issue, for example If you have two reminders and select 'View Event Details' on the 1st reminder,  does the 2st reminder popup before the Details of the1st reminder displays? 
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My app store is saying i have to change date and time setting to get a secure connection but the date and time are correct please help?

    My app store is telling me i have yo change date and time setting to download apps and idk what is wrong cause date and time are correct

    Is the Time Zone also correct?
    Also see:
    Can't connect to the iTunes Store

  • Can I get the date to display along with the day and time

    can I get the date displayed with the day of week and time?

    Hi Mary, you can, but what version of OSX are you running on what Mac?
    See if this helps for starters...
    http://paulstamatiou.com/how-to-display-date-in-os-x-menu-bar

  • My Imessage on my iPod will not allow me to sign in. I have already tried the day and time thing that is right. What can I do??

    I have no idea what to do it will not sign in!

    Please start your own thread but try everything listed here. http://support.apple.com/kb/HT4623

  • Reminder keeps crashing after setting up day and time,

    When ever I set up a reminder in reminder and i set the day and time when the reminder should pop up Reminder crashes it closes down and ask me to reopen it
    any idea

    Well the goods is it wasn't a windows problem it was a cloud problem.  apple helped me fix it but again it shows the compatibility problems between the two.  sending back apple products and sticking with windows.  I don't know if your a tech or what because of your bold verbage but your cut and dry answer was not only incorrect but condescending.  Please, you don't have to respond because i will be closing the window and won't have need of it again with experiencing this type of response to my query I will choose to look elsewhere for assistance. just wanted to let you know how i felt about your feedback.  I do want to thank you for answering me but I also want to ask that you think about lightening up the next time you try to help someone. Thanks Tim have a great day.

  • Resetting the date and time after the phone has be...

    Hi,
    I keep having to reset the date and time very time I turn my phone off. I was thinking it was to do with the battery so I fully charged it, turned it off then turned it on again and it asks me for the date and time.
    I only noticed this because I've had exams and I have to turn my phone off for them.
    Could it be a dying internal battery?
    I know with computers there's a BIOS battery that controls date and time. When they start to die the date and time are inaccurate.
    I'll have to find time to take it to the 3-Mobile shop either on Sunday or sometime next week if it is an internal battery problem.
    Thanks,
    Omar
    "A Jade stone is useless before it is processed; a man is good-for-nothing until he is educated."

    Hi omar3256
    I believe that there is a very small component on the motherboard which serves this purpose, although whether battery or sort of capacitor I am not certain. The N80 especially seemed to be prone to this failure.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Changing the Date and Time of photos

    Hello,
    i have been importing images from my windows machine and want all the dates to be correct, i have seen the adjust date and time, and made the changes but under the events the dates dont change and when i click individual photos the dates and times are not changing.
    so i was wondering how do i change the time for each photo and event? can i change the time to a start and finish date rather than just one date?
    Any help with the above would be much appreciated.
    Thanks

    I have just looked at this again, i dont see an option to set both a start and end date, any ideas?
    That is not an an option - and it makes no sense
    You can do one of three things:
    1 - add a constant delta to all selected photos thereby correcting an incorrect setting on a camera and preserving the sequence and integrity of the photos dates ad times
    2 - change the date and time for all selected photos to a specific value
    3 - change the date and time for all selected photos to a base value plus an increment for each successive photo.
    There are two choices under the photos menu
    1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
    2 - batch change date and time - this simply changes the date & time to your selected value with an option to add an increment to each
    Both have an option to modify the original photo which I do (I'm not sure why you would not want to modify the original)
    And when i go into photos, the ones that i have altered by +Photos >>> Adjust Date and Time+ still have different times and dates, any ideas?
    AS described in the iPhoto help and above
    1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
    So after adjusting time and date all photos selected will have the time and date changed by the same amount (a constant delta) and if they were all different before they will still all be different - if they were all the same before adjustment they will still all be the same but at a different value
    LN

Maybe you are looking for