Do not pass from sign in page

I down loaded Elements 12, it is installed but do not open.  Do not pass from sign in page.  I have windows 8 OS.

Hi Jeff.  Yes, I was prompted to enter my Adobe ID, after that the program did not continue.  It only show a little circle spinning on the lower right.  But after 5 minutes it still was spinning.
De: Jeff A Wright [email protected]
Enviado el: martes, 10 de diciembre de 2013 11:57 a. m.
Para: panamito
Asunto: Do not pass from sign in page
Re: Do not pass from sign in page
created by Jeff A Wright <http://forums.adobe.com/people/JeffAWright>  in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5917358#5917358

Similar Messages

  • Some pages of my website are not active from the home page

    Built my website with iweb.  When I go to the site the tabs to all the pages show, but several of them are not active from the home page.  If I go to one of the active pages I can then click on the other pages.  Is there a way to fix this?  I've tried reloading the entire site, but several of the tabs remain inactive from the home page.  Any help would be greatly appreciate - Thanks,  Jodi

    Thanks Roddy - I tried moving it down and it didn't work - That line is in the Template I used to build the site and is on every page.  I did finally get the command A to work, but there's nothing covering those bottom three tabs.
    However, when I put my mouse in the area of the box where it has my name (the image you sent me above) it shows a link desktop/site/booker_files and I noticed I have one of the rss feed blue arrows, but I can't seem to delete it.  I wonder if that has something to do with it.  It does the same thing on the website if you hover with your mouse. 
    Truly appreciate your help.
    Jodi

  • Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Hi,
    Did the issue happen only for you or for multiple users?
    Make sure phone update to the latest firmware.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • My iTune Match does not pass from step 1

    My iTunes Match does not pass from step 1.  Every time I start it I get an error msg (4010).  Does anybody knows whats the problem?

    There is a robust discussion about this here:
    https://discussions.apple.com/message/18858414?ac_cid=tw123456#18858414

  • My computer will not access the sign in page for hotspot

     I am using a Toshiba laptop w/windows 7. I am connected to the xfinity hotspot but it will not redirect to sign in screen. I have tried typing in the direct URL and it tells me no internet activity can be detected, page not available. I have used multiple URL's I found listed on another board and none get me there.

    On Comcast.net go to your account / services / xfinity internet, there is a link to manage devices for xfinity wifi
    Your device only needs to sign in once to xfinitywifi, then it automatically logons on from there on.  Look at that manage devices page and see if your equipment is listed.  You might want to clean up devices that are not familar, or even delete everything and start over.  Then see if you can connect to a xfinitywif hotspot.
    There is no url to go to, it either connects automatically, or a sign in page will pop up only the first time with that device.

  • Field Value not passed from IDOC (orders01) to File Generated

    Hi All,
    I have added a custom field to a PO at item level (ekpo-Ztest)and Passing it to OUTBOUND IDOC.
    In process of passing to IDOC(ORDERS01) i mapped the field to segment E2EDP19001-MFRPN and i see the value in the IDOC when i view it in WE02.
    The problem is when i generate a file i don't see the value of E2EDP19001-MFRPN
    We are already using QUALF,IDTNR,KTEXT of E2EDP19001 and i see all the values of these fields being passed from IDOC to file generated .
    Let me know as i'm missing anything in here
    I quick note ,
    I see 3 version for E2EDP19 Segment for orders01
    Vesrion
    002     E2EDP19002                             8     242     02/14/2005
    001     E2EDP19001     40A                    5     160     08/19/1997
    000     E2EDP19             30A                     3     108     04/03/1995
    1)The version 000 and 001 are released but not 002 Version
    2)May be i 'm using version 000 and its out put length is only 108 and these fields(QUALF,IDTNR,KTEXT) together occupy 108 and there is no room for my new field but My IDOC dispalys E2EDP19001 and E2EDP19002 and also it displays my new field but its the output file generated that doesn't show the value
    Thanks

    Resolved Myself
    Thanks

  • Values not passing from form to context attributes (value attributes)

    Hi Experts,
    I have bound the properties of theadobe interactive form (WD-Java) to the context attributes but the values are not passing to the value attributes at runtime.
    For your information I have not bound the pdfsource binary attribute of the view to the custom controller pdfsource binary attribute.
    Please advise.
    Thanks,
    Shobhit

    Context
       GetData - ModelNode mapped to controller context (DataSource)
             Attribute1 - Value Attribute (Form Field)
    Is it allright to have the Data Source as a ModelNode (mapped to the controller context node) and then have Value Attributes under the ModelNode which are then bound to the adobe form input fields.
    I know its frustrating to advise on such questions without looking at the code actually. But I would definitely need your support.
    If possible could you mail me a project of yours where you have the form being PREFILLED with some values coming from a RFC FM and then the same form gets posted to SAP though another RFC FM.
    Thanks,
    [email protected]
    OK. When I create a Fresh Adobe Interactive Form application, it works fine.
    The problem Im facing is in the case, when Im using an existing PDF file created in the ABAP stack (TCode SFP). I am importing this PDF file into the WebDynpro Java Application and then binding the fields. So in this case the context binding does not work.
    You guyz are right, I need to check if there is any other script which exists. But still what are views after this update?
    Message was edited by:
            Shobhit Swarup Mathur

  • VALUE NOT PASSING FROM 1 PAGE TO OTHER PAGE ?

    Hi friends
    I have bsp application  with 3 htm pages.
    I have a input value in first page like i_matnr.
    If i give input material no its valu is coming in second page.
    But its not coming in 3rd page.So what i have to do?
    Moosa

    Hi:
    you should put like
    in page attribute,
    declare matnr
    and in oninputprocessing or at where you have put your query.
    matnr = request->get_form_field( 'matnr' ).
    Regards
    Shashi

  • Values not passing from program to Layout

    Hi Abaper's
    My requirement is I need to set company logo in Invoice ( VF03 ) if a particualar condition satisifies, for this I have set a FLAG in my
    driver program and called the FLAG in my Script Layout.
    Here my issue is, for certain invoices the FLAG set in the program is being called in the Layout and Logo is displayed in invoice copy ( when excuted both in foreground and back ground).
    But in certain invoices, if run in foreground none of the values ( means not only flag but also all the values to be passed to layout)
    is displayed in invoice. It is only displaying the hard coded values in the layout ( showing blank page ).
    and if I run in background all the values are passing to layout except all Global Variables (flags) in the program even though it
    has value in the program.
    Please advice what should be the problem, I have checked with my Functional and it seems to be fine in customization part.
    Karthik
    Edited by: Karthik R on Sep 21, 2010 2:42 PM

    Hi Tamas,
    I have tried it, but still not able to figure out the exact problem....since while running in background or foreground some of the all values including my logo are displayed in invoice but for some invoices none of the values from driver prgram is getting passed to layout while running in forground....but when run in background all values are passing except the FLAG set in the drvier program.
    what should be the reason for this ? for some invoices all the values from driver is passing to layout but for some cases its not passing

  • Added new field to cube but data not passed from DSO

    Hope someone can help.
    (BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

    hi peter,
    Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
    I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
    Regards,
    Frank

  • KB2719704 Hotfix not available from Microsoft's page?

    "0x0000003B" or "0x000000D5" Stop error in Windows 7 or in Windows Server 2008 R2
    Need this hotfix please :)
    Link to Hotfix

    Hah thanks I did click on that which is why Im posting here that its not working! :) This is what I get
    Sorry, the page you requested is not available.
    The page you were looking for is currently not available. The address may not be correct, or there may be a temporary problem with this site. Please try one of the following options:
    Check the address for typing errors.
    Click the Back button and try a different option from the navigation menu.
    Try this page again later.

  • New field data not passed from BupaSearch to BupaCreate

    Hi,
    We have 2 new fields on BupaSearch. When we hit the create button to create a new BP, any data entered in the 2 new fields is not then passed through to the BupaCreate view. I've debugged in method 'CREATE_ACCOUNT' in BupaSearch, where it sets up parameters but the fields are not available to use at this point for some reason. So, for example, the following will fail:
    lv_nickname = lv_query->get_property_as_string( 'NICKNAME' ).
    Can anyone point me in the right direction ?
    thanks,
    Malcolm.

    Hi,
    I need your help. Im trying to create a new field "identification type" in a view. This field is existing as a attribute of "BuilIdNumber" object. Im able to add this as context node. But when i include this field in view, and launch webclient, this field is disabled,  Can you help me on this. I have used the wizard for creating a context node.
    Can you plz tell all the steps in detail that are to be carried to add new field to a view.
    Thanks in advance,
    chandan

  • SAP HCM P&F - Update an infotype field which is NOT passed from Form

    Dear Experts,
    I have a requirement to update the Infotype with the entries in the HCM form (input by Employee in ESS) upon Manager's approval in MSS.
    We are achieving this functionality using HCM P&F (FPM) with an Workflow associated.  In this Workflow Standard Task (TS17900108) is used to Save the form data into the Database.
    But there is one field (APPROVED_DATE) in the Infotype whose value is not from the FORM but should be updated in the Infotype.
    Please help me with your inputs.
    Regards,
    Shankar

    Dear Christopher,
    I am extremely thankful to you for all the replies.  But, unfortunately, we are messed up with this requirement and we couldn't achieve it.
    In this regard, could you please give us the step-by-step procedure to achieve this functionality?
    Requirement in brief again:
    We have designed Overtime HCM form (FPM) using which employee requests for the Overtime.  This form is sent for the Manager for approval.  We have achieved this functionality.  With the Manager Approval, the database is also updated perfectly.
    Then we have added one more field in the infotype to track the Approved Date.  This field is to be updated along with the other fields (sent from FORM) upon the approval of the manager.
    And now though the other fields are updated correctly into the infotype, the approved date is not updated.
    Thanks a ton in advance for your guidance as this is very critical and urgent requirement for us.
    Regards,
    Shankar.

  • I have a question for you. How can i print only a few pages (so not everything) from a bookmarked page? Please send your answer to peterdoornaar@***.nl THANKS !!!

    I bookmarked a website and wanted to print it. It is about a book. Somehow firefox crashed, and recovered. Now i want to print the the last 8 pages but it prints EVERYTHING AGAIN. I tried copying and pasting, didn't work. I really hope you can help me.
    with regards
    Peter Doornaar
    ''no email support from forum threads, all responses are posted here in the forum''

    The option should be visible here: http://support.mozilla.com/en-US/kb/Printing%20a%20web%20page#w_print-window-settings
    Print range section - Lets you specify which pages of the current web page are printed:
    * Select '''All''' to print everything.
    * Select '''Pages''' and enter the range of pages you want to print. For example, selecting "from 1 to 1" prints the first page only.
    * Select '''Selection''' to print only the part the page you've highlighted.
    Does it work for you?

  • Payload Not passed from Mapping??

    HI All..
    I am trying to execute a FCC to JDBC scenario. Where i am trying to execute stored procedure.
    This is my paylaod for inbound message
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns:STP_Test_Input_DT xmlns:ns="http://MCDBtest">
    - <Record>
    - <Root>
      <Data1>007</Data1>
      <Data2>PALMONE</Data2>
      </Root>
    - <Root>
      <Data1>001</Data1>
      <Data2>GAURAV</Data2>
      </Root>
      </Record>
      </ns:STP_Test_Input_DT>
    I am not able to map it to the output structure.
    it is showing only this..
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:STP_Test_Output_MT xmlns:ns0="http://MCDBtest"><Statement><stored_Proc_Name action="EXECUTE"></stored_Proc_Name></Statement></ns0:STP_Test_Output_MT>
    can you help me with the kind of output structure i require to map it correctly
    i have created input and output as follows
    record
    root
    data1
    data2
    for FCC and
    statement
    action
    data1
    isInput
    type
    data2
    isInput
    type
    for JDBC stored procedure execution
    i have tried with
    statement
    action
    record
    root
    data1
    isInput
    type
    data2
    isInput
    type
    but still not able to map the payload correctly.

    Thanks for replying
    Yes i have checked with mapping
    I am executing a stored procedure and reading data from a CSV file
    input structure is
    Record
      Root               0.. unbounded
         Data1 string 0..1
         Data 2 string 0..1
    output strucure is
    statement
      storedprocedurename
         action -> execute
         table -> constant (stored procedure name)
         Data1 String 0..1 mapped to Data1 of input
             isInput -> true
             type -> CHAR
         Data2 String 0..1mapped to Data2 of input
             isInput -> true
             type -> CHAR
    problem i m getting is while testing data is going to action and table and after that its not going
    i have also tried with changed output structure as i kept root over data1 and data2 and mapped root to root of input structure.
    Thanks
    Gaurav

Maybe you are looking for