Do not see image and content folders after creating a new site
Why didn't I see the image folder, content folder......aftter I create a new site?
DW does not create any folders for you, except those used by DW code (Templates and SpryAssets for example).
It's up to you to organize your site the way that makes the most sense to you by adding in folders like images, content, pages, etc.
Just don't move files out of any of the automatically generated folders that DW does give you, that can break things (especially Template .dwt files).
Similar Messages
-
Here is the scenario. (SharePoint 2013)
In Dev/Test/Prod any Site that we Save as Template and include content and then, Download and try to use in a new Site Collection errors out upon use "List does not exist" error.
This occurs with ANY Site, even OOB Team Site template that is immediately "Saved as Template".
We can do this in any other environment (we have several test labs 1 in O365 and 1 in VM that is very OOB)
We can take the site solution from the environments we're having the issue in and use them successfully in our Lab environments (on prem or in the cloud).
We have also tried taking Site solution from lab environment (where we know it works fine) and tried to use these in Dev/Test/Prod and they also error on us.
In the Dev/Test/Prod environments that have the issue if we DO NOT include content, the template works just fine to create a new site collection with the template.
Keep in mind we're talking about environment with no 3rd party apps, no custom code, just 2013 SharePoint with all patches and CU up to June 2013, AND this is ANY template even a vanilla OOB template without anything in it.
You can always save site as template including content, download/upload it to new site collection solutions gallery and activate it without any issue... it's only if you try to use these templates to create a site that the error occurs.
Any thoughts on this?
JI also experiencing the same issue. I also tried to create a new site-collection using publishing site template, resulting in "list not found" error.
Later I tried just a team-site (with content) -> the same error.
The error appears on two different (post SP1) farms. That's why I tested the site-collection creation on an old (pre SP1) farm: the error doesn't exist. Site-Collections are created properly.
My conclusion is: either SharePoint SP1 or a later CU causing the error.
Regards,
Valerian -
I can not see images on a HDMI TV connected my laptop Displayport
Dear all,
I need to connect the laptop to a HDMI TV and therefore I purchased a HP Display port to HDMI cable adapter P/N: 612873. It is not working.
I phoned HP service, they recommend to me to download the HP Softpaq download manager and update my laptop.
After doing this, still I can not see images on the TV.
I know the TV is working, because other laptops like Asus, Toshiba are connected to the TV and works fine.
Does anybody know what should I do?
Thanks in advance.
Ernest-bcn@Ernest-bcn
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
Why cannot I not see my mac mail folders?
Why can I not see my mac mail folders on my iPad?
I also use MobileMe and yes it uses IMAP by default.
Okay, it's simple than. The folders you've created are local folders which are not stored on the server.
In order to change that open Mail.app select Mailbox->New Mailbox and make sure you choose MobileMe at Location.
Now drag&drop your "On my Mac" mails into that new "MobileMe" folder. After a few min. they should be synced. -
Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?
I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
Thank God Apple hasn't (yet) broken bash. -
After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?
DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format
-
Jdeveloper visual editor do not show images and other component shapes
I used jdeveloper(10.1.3.3.0) to create an ADF BC application, I create a jsf jsp file and drag and drop components from ADF Faces Core to this file visual editor, but jdeveloper visual editor do not show images and other component shapes.
Could you tell me how I can fix this problem?
Thanks,
MikeActually, I need to make a dummy change to the jsp file and then it will display boxes representing the objects in the visual editor whereas I get an exception in the log:
javax.servlet.jsp.JspException: Cannot find FacesContext
This does not talk much to me !
Thanks -
Frozon "Do not Disconnect" image and cannot restore
My iPod is frozon on th "Do not Disconnet" image and mt ipod is corrupt so i need to restore it yet i can as it comes up with an error saying "There was a problem downloading the ipod software for the ipod "ipod". the requested resource was not found." any ideas i really need help cause i cant listen to any music on my ipod as it is frozon and cant restore
GeoI held the "Menu" button along with the center button
for about 6 seconds (as they state you should) and
all of the sudden the screen finally broke from the
"Do not disconnect" screen and began charging, now
everything is working as it should.
Oh my gosh, thanks so much, that did it! I, too, did not know that the "Select" button is the middle. And in fact, in all my prior repeated attempts to re-set my iPod, I had made a point of trying NOT to press the middle, but just the Menu button and the bottom button at the same time (since I thought that the bottom/play button must also be the select button). (Why did I think that? Answer -- because the 5R's instructions seemed, I mistakenly thought, to be saying to be careful not to touch the middle. I guess not. If anybody at Apple is reading this, please note that people like me can easily confused by unexplained verbiage like "Select button," apparently. Please consider tweaking the 5R's instructions to explain this to others.) -
I downloaded a document dpf, I can not see it and also when I open my iBook is closed immediately. What should I do?
1. Install the free Adobe Reader app
2. Open the PDF attachment with Adobe Reader. -
After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.
Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV). -
I bought a new iMac. iWeb and all its folders migrated over, no problem, but I cannot bring up my website - it only seems to allow for creating a new site.
You need the 'Domain' file in which iWeb keeps its data. This lives by default in (user)/Library/Application Support/iWeb. You need to locate it on the old machine and copy it to the same position in the new machine. Note that it is the Library folder in your Home folder, not the one at root level.
This folder is hidden on Lion and above; to access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice. In Mavericks you can make it permanently visible - open your Home Folder the from the Finder's View menu, choose show View Options and check Show User Library. -
After upgrade to Lion, iPhoto will not save events nor save albums after created.
After upgrade to Lion, iPhoto will not save events nor save albums after created. Once iPhoto is shut down and re-launched, albums and events created no longer exist. How can this be fixed?
Also, when attempting to create cards, iPhoto freezes.
Message was edited by: askgabeOption 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Everytime i try to download from app store it gives me an error message saying "This is not a Test User account. Please create a new account in the Sandbox environment." although i never used jailbreak or downloaded cracked software
Yep, I've been reading through other threads on lots of different sites over the last few hours and I can't seem to find a working solution, even though some seem to have worked for other people.
Most of them hadn't been updated in a while so I made my own post to see if anyone has anything new. -
I rec'd an alert that my "Apple ID and phone no. are now being used for iCloud on a new iPhone." I am not using iCloud and I don't have a new iPhone. Is this something to worry about?
Howdy Libbidydooda,
There are a couple of possibilities that may apply to the email you have received regarding your Apple ID. The first is that the email may be a legitimate warning that your Apple ID has been compromised. For this reason I would suggest that you change the password to your Apple ID as soon as possible. Use the instructions on this page -
Apple ID: Changing your password - Apple Support
In order to increase security for your Apple ID you may want to set up and use two-step verification. See this article for information about it -
Frequently asked questions about two-step verification for Apple ID - Apple Support
The second possibilty is that the email is an attempt at "phishing" in order to get you to reveal personal information. Typically this is done with an email that looks like it comes from an official source but has links to web pages that, while they may look like they are real, may actually be gathering your information for use by others. This article has more information about phishing -
Identifying fraudulent "phishing" email - Apple Support
For this reason it is important that you do not follow any links in the email, as they may compromise your security.
Thanks for using Apple Support Communities.
Best,
Brett L -
Merge original image and drawn graphic together as an new image
Hi,
I created an application which can draw graphic(line, rectangle, etc) upon an displayed image. However, I want the application be able to merge the drawn graphic into the image and then save it as a new image. Does anyone know how to do that? I am using Java 2D in my application.
Thanks for help.Hi,
Hope this is the code that you are looking for
* @ PlayWithImage.java
* @ Author : Sathish Rao S
* @ Date : 14th March 2002
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.awt.Frame;
import java.awt.Image;
import java.awt.Color;
import java.awt.Font;
import java.awt.Graphics;
import java.awt.Composite;
import java.awt.Graphics2D;
import java.awt.RenderingHints;
import java.awt.geom.Rectangle2D;
import java.awt.image.BufferedImage;
import java.awt.font.FontRenderContext;
import com.sun.image.codec.jpeg.JPEGCodec;
import com.sun.image.codec.jpeg.JPEGEncodeParam;
import com.sun.image.codec.jpeg.JPEGImageDecoder;
import com.sun.image.codec.jpeg.JPEGImageEncoder;
public class PlayWithImage {
public static void main(String args[]) {
EditImage ei = new EditImage();
ei.drawImage();
System.exit(0);
class EditImage {
File tmpf;
FileOutputStream fout;
Frame frame=null;
Graphics g=null;
String filePath = "D:\\Your\\Folder\\Here";
public void drawImage() {
try
frame=new Frame();
frame.addNotify();
//new image's width and height
int width = 117;
int height = 57;
BufferedImage image = new BufferedImage(width,height,BufferedImage.TYPE_INT_RGB);
g=image.getGraphics();
Graphics2D g2=(Graphics2D)g;
g2.setPaint(new Color(255,255,255));
Rectangle2D background = new Rectangle2D.Double(0,0,width,height);
g2.fill(background);
RenderingHints hints=new RenderingHints(RenderingHints.KEY_ANTIALIASING,RenderingHints.VALUE_ANTIALIAS_ON);
g2.setRenderingHints(hints);
try
File f = new File("your_image.jpg");
FileInputStream fis = new FileInputStream(f.getAbsolutePath());
JPEGImageDecoder JPEG_decoder = JPEGCodec.createJPEGDecoder(fis);
BufferedImage buffimg = JPEG_decoder.decodeAsBufferedImage();
g2.drawImage(buffimg, 0, 0, null);
g2.setColor(new Color(80,80,255));
g2.setFont(new Font("Times New Roman",Font.BOLD,12));
paintCenteredText(g2,"Your_Name_here",(width+40)/2,54);
}catch(Exception e)
System.out.println(e);
* Add your part of graphics here
g2.setPaint(new Color(0,0,0));
Rectangle2D border = new Rectangle2D.Double(0,0,width-1,height-1);
g2.draw(border);
// This will create a new temp file.
// Your Original file is not disturbed :)
tmpf=File.createTempFile("your_new_image",".jpg",new File(filePath));
fout=new FileOutputStream(tmpf);
JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(fout);
JPEGEncodeParam param = encoder.getDefaultJPEGEncodeParam(image);
encoder.setJPEGEncodeParam(param);
encoder.encode(image);
fout.close();
}catch(Exception e)
System.out.println("Exception here");
}finally
/*Clean up all the resources*/
if(g!=null)g.dispose();
if(frame!=null)frame.removeNotify();
protected void paintCenteredText(Graphics2D g2, String s, int centerx,int baselineY)
FontRenderContext frc=g2.getFontRenderContext();
Rectangle2D bounds=g2.getFont().getStringBounds(s,frc);
float wdth=(float)bounds.getWidth();
g2.drawString(s,centerx - wdth/2,baselineY);
Maybe you are looking for
-
i am adding a string to an array but first have to check if it is already present. The code i had was trying is //B is capacity of array //adding from B downwards //add is set when a new string is added for(int search = B; search != add; search--){ i
-
Key not valid for use in specified state - I do I fix this error when installing Adobe Reader
How can I install reader when I get this error: key not valid for use in specified state
-
hello, I wanna figure out how to make filters in Process Flow, because I don't see them. Something like: - if to_char(sysdate,'yyyy') from dual > 2006 then include a mapping. thank you br
-
First, I just want to apologize if this isn't appropriate here. Feel free to lock/delete/move my post elsewhere :) I'm having a BC4J related problem in the OA Framework on JDeveloper 9.0.3.5 and Oracle EBS 11.5.10. I have two EOs that are linked by c
-
Does anyone know if versions and auto save work with microsoft office 08 in Lion? thanks
does anyone know if version and auto save work on office 08 with lion?