Do not see Set-Up System Monitoring Button

Dear Friends
I have configurated the Maintenance Optimizer successfully
Now I want to configure the system monitoring, but i do not see the Sep-Up system monitoring button in the T-CODE solution_manager ---> Operation Setup, I only can see the :
mySAP SCM Monitoring with SAP Solution Manager and CCMS
SAP SRM 4.0/5.0 System Landscape Monitoring
Could you help me?
Best Regards

Hi,
From transaction SMSY, make sure you have the target system defined with proper connection setup. once it's defined, attach your target system to an existing or new Landscape solution.
After that you should be able to see the config. option in transaction Solution Manager.
Hope this helps,
Kalyan.

Similar Messages

Set-Up System Monitoring

when i transaction SOLUTION_MANAGER and Choose Solution Monitoring System Monitoring, in the Operations Set-Up area at the overview area where you see system monitoring set-up i cant find or rather change it to change mode..that icon for change is not there..all i see are the bestpractice document..how will i setup my system monitoring when i can find the change icon.help asap.

HI Dayo,
Maybe the problem is when you created RFCs from Solution Manager to Satellite System you didn't confirm the checkbox "Assign RFC Conection for System Monitoring". If it's what happened, you should regenerate the RFCs and make sure that that checkbox is confirmed.
On the other hand, SAP Note 455356 Requirements for System Monitoring in Solution Manager can help.
I hope this could help you.
Regards,
Tomas.

Photoshop CC Not Seeing All of System Ram

I have a Windows 7 -64 bit Professional system with 24 gb of ram. Photoshop CS 5 and 6 had no problem seeing that much ram, but Photoshop CC only shows a little less than 4 gb.

Photoshop CC installs a 32 bit exe and a 64 bit exe on your system. Use the 64 bit version under Program Files. or type Photoshop CC in the Start Menu's search box. You should see Photoshop CC 64-bit in the list.
The 32-bit version is the one with the 4 GB ceiling, but some users have legacy 32-bit plugins and drivers that have not been updated and won't work in the 64 bit version.
Gene

HT204053 I checked for updates, I do not see iCloud on system preferences

Mac OS X version 10.6.8

Hi ...
Installing the OS X Lion Update 10.7.3 (Client Combo may help.
Restart your Mac after the combo is installed then try System Preferences > iCloud.
Apple - iCloud - Learn how to set up iCloud on all your devices
edited by: cs

System Monitoring set up

Hi All,
I am using solution manager 7.0 on linux and DB2 and want to setup system monitor on solution manager 7.0.
But whn I goto DSWP->operation setup->system monitoring
I cant see "set- up system monitor" button under to start confiuring it.
Any idea why there is no button to start configuring ?????
Thanks

Hi,
Please check
Transaction: SMSY
Under Landscape Components-> Product Systems-> SAP CRM (Eg.)-> SID-> CRM Application Server-> Client
Select the client and then click on Check RFC Destinations button on top towards right. Then in the next screen select the check box Assign RFC Destination for System Monitoring and click on Check button and then Green tick mark.
After this also in transaction dswp Solution-> Solution Landscape->Solution Landscape Maintenance under System Group tab all the relevant Logical Components are assigned.
It should solve the issue.
Hope this helps.
Thanks,
Raghavendra.
Edited by: Raghavendra B Deshpande on Jun 16, 2010 5:10 AM

Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

Set up of System Monitoring with SPS 15 only through "Work center"

Hi!
We use SAP Solution Manager SPS 15 and would like to set up System Monitoring function in order to monitor satellite systems.
Is is only possible as of SPS 15 with tcode "solman_workcenter"?
I have heared as of SPS 15 the tcode "dswp" provides only Display view...
Thank you very much!
regards
H. Thomasson

Hello
Is is only possible as of SPS 15 with tcode "solman_workcenter"?
--> If you want to configure Solution Monitoring, you can follow rkt in service market place. With SP15, SAP has given additional functionality to access solutions or projects through work centers. Now its up to you to use this functionality or you can directly go to solution_manager or DSWP to configure, doesnt matter.
I have heared as of SPS 15 the tcode "dswp" provides only Display view...
--> Have you tried? Its not Display, either way through work center you are going to access the same transaction. Please check.
Thanks
Sharmishtha

Photoshop not seeing export color space setting in Lightroom 4

MY LR or PS programs are not acting as expected.
When my Lightroom 4 is set to export to Photoshop in either the sRGB color space or the AdobeRGB color space, and Photoshop is set for the sRGB space, Photoshop gives a color mismatch error in both cases, saying the image is an AdobeRGB embedded image. However, if the color space in PS is set for AdobeRGB, even if the export setting in Lightroom is sRGB, there is no mismatch error.
Apparently, PS sees every image as embedded with AdobeRGB.
I have a Sony NEX6 camera. I have taken pictures in the camera sRGB color space and the AdobeRGB space, which I used for this test. Since I shoot in RAW, this should not matter, so I don’t think it is the issue, and, in fact, I get the same result no matter which color space the camera is in.
If LR export and PS color space are the same, why should there be a mismatch, and why is PS not seeing the sRGB space? Might there be a setting in Lightroom or Photoshop that I am missing?

howdego wrote:
I am, however, trying to decide on the right color space to use, which is how I noticed this problem. I rarely make prints of my photos. I make bluray movies using Proshow Producer. I recently got a new monitor and Samsung LED HDTV, and found that my photo videos did not display right and I am trying to find out why. I found the normal viewing settings of the TV have too much color and sharpness, so I established another group of settings for photos, which helped. However, I am still not satisfied.
These are two separate but related issues.
1) It's almost impossible to get accurate Color and Luminance level rendering inside LR if you don't use a hardware monitor calibrator to adjust your computer monitor.
2) LCD TV's use settings to "enhance" color, brightness, and contrast that is usually very, very inacuuarte. But this is what most non-photography people seem to like so TV manufacturers crank up the "default settings." I also have an older 52" Samsung TV (LN-T5265F) that I've manually adjusted for more accurate color. Try using the 'Movie' mode, which is the most accurate mode and turn the Backlight setting down. Here are the settings I use with my Samsung TV. I assume your Samsung TV's controls are similar:
Setup Screens
HDMI 1 (Cable Box) & Coax (Cable)
HDMI 2 (Panasonic Blu-Ray Player)
PICTURE - 1
Movie
Standard
Dynamic
Movie
Standard
Dynamic
Contrast
82
82
82
82
82
82
Brightness
43
45
45
43
45
45
Sharpness
25
25
35
15
15
25
Color
42
45
45
44
45
45
Tint
77 R
77 R
84 R
77 R
77 R
84 R
Backlight
5
6
7
5
5
6
PICTURE - 2
Color Tone
Normal
Normal
Normal
Normal
Normal
Normal
Detailed Settings
Black Adjust
Off
NA
NA
Off
NA
NA
Dynamic Contrast
Low
NA
NA
Low
NA
NA
Gamma
-1
NA
NA
-1
NA
NA
Color Space
Auto
NA
NA
Auto
NA
NA
White Balance
R-Offset
13
NA
NA
13
NA
NA
G-Offset
15
NA
NA
15
NA
NA
B-Offset
17
NA
NA
17
NA
NA
R-Gain
15
NA
NA
15
NA
NA
G-Gain
12
NA
NA
12
NA
NA
B-Gain
17
NA
NA
17
NA
NA
My Color Control
Pink
15
NA
NA
15
NA
NA
Green
15
NA
NA
15
NA
NA
Blue
15
NA
NA
15
NA
NA
White
15
NA
NA
15
NA
NA
Edge Ehnacement
On
NA
NA
On
NA
NA
xvYCC
Off
NA
NA
Off
NA
NA
Digital NR
Low
Low
Low
Low
Low
Low
Active Color
Off(NA)
Off(NA)
Off
Off(NA)
Off(NA)
Off
Dnie
Off(NA)
Off
Off
Off(NA)
Off
Off
SETUP - Screen 2
Energy Saving
Off
Off
Off
Off
Off
Off
SETUP - Screen 3
HDMI Black Level
Low
Low
Low
Low
Low
Low
Film Mode
Off(NA)
Off(NA)
Off(NA)
Off(NA)
Off(NA)
Off(NA)
howdego wrote:
So it occurred to me that some colors might be wrong, or too saturated, because I am not seeing them on my monitor as they will appear on the HDTV. I am thinking that since sRGB is my final color space, I would try to do everything in the sRGB space, including setting my monitor to sRGB (I have a Dell 2413 which supports adobeRGB too). I was inn the process of trying this when I found the issue at hand. Might you have any thoughts about this color space choice
If you have a wide-gamut monitor you are better off using it in Adobe RGB mode with a monitor calibrator. But then the monitor will not look correct in non-color managed applications:
http://www.gballard.net/photoshop/srgb_wide_gamut.html
You can circumvent this issue by using your monitor in sRGB mode, but I'd still suggest you use a hardware monitor calibrator. Either way it is imortatnt that you have a proper monitor profile assigned in Windows or OS X Color Management. The monitor manufacturer provides these, but they don't always work well with LR for numerous reasons.
To insure the best image quality you should do all of your editing in PS using 16 bit TIFF with ProPhoto RGB profile format until you are ready to Export. For use with ProShow you can use TIFFs or JPEGs, but use sRGB color profile to avoid any color management issue. JPEGs are fine and a LR Quality higher than 80 (10 in PS) is a waste of disk space for slideshow images.
In short you've got a lot of "variables" between the uncalibrated monitor and out-of-the-box non-adjusted TV. The former requires a good hardware calibrator aad the latter a good "eye" to adjust it.

System monitoring change not available

Hello,
I am trying to configure system monitoring for one our test system. When I go the system monitoring option under operations setup , I am not finding the "setup system monitoring" service. In SMSY all entries looks okay. We are using solman version 4.0. Any inputs on this ?
Thanks,
Mahesh

Hi Mahesh,
before you can set up the system monitoring you have to assign a system to the solution landscape.
Therefore you have to assign the relevant system to a logical component and the the logical component to the solution landscape. This steps can be performed in transaction SMSY.
After that the "setup system monitoring" session should apper in your solution landscape.
Regards
Thomas

I do not see Nike iPod button in iTunes 11 when I connect my iPhone 4S

I cannot sync my running data from iPhone 4S with Nikeplus.com. I use Nike+iPod application (I think it is part of iOS)
iPhone is running iOS 6.0.1
When I connect my iPhone to Mac, in iTunes 11 I do not see Nike+iPod tab or button or anything.. While all Help and supports documents tell me I should sse it.
What did do wrong?
Cheers,
Vladimir

If it's a digital copy (as opposed to an iTunes purchase) then I think that you only get one download of it (iTunes film purchases can be re-downloaded in some countries) - in which case, if you've downloaded it to your computer, then if you want a copy of it on the iPad as well, then you will need to sync it to the iPad by connecting it to your computer's iTunes i.e. you can't just download it again. If you just want to play it on the iPad then you can stream it to it via home sharing (so your computer and iPad will need to be connected to the same network), but that won't put a copy of it on the iPad.

System monitoring - alert email notification

Hello Sapers,
I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur. Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
Thank you very much for any help

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

System Monitoring in Solution Manager 4.0

Hi all,
I want to set up system monitoring for landscape BW, ECC and SCM systems using Solution Manager 4.0 and am new to Sol Man.
So could anyone please help me with the steps.
Thanks in advance,
Sandeep.

Sandeep,
Trust me, there is no one resource that you can refer to and complete this system monitoring project. I recently configured this a couple of days ago. I can tell you that I haven't completed it yet. I have only completed the configuring the 'System Monitoring' part of it. I am yet to define monitors so that, I can monitor what I want of the satellite systems. So far, it took me about 4 days. Let me point out the basic steps you need to follow. Beyond that, please refer to the links I paste below:
Steps to configure 'System Monitoring' in Solution Manager:
1. Follow the 'Solution Manager Preparation' found under SPRO --> Solution Manager --> Read Me.
2. Make sure you have the latest ST-ICO and ST-SER installed in your Solution Manager (Note: 892412).
3. Make sure the Solution Manager has the latest support packages applied.
4. Prepare the 'Satellite Systems' as per note 455356:
     a. Create the role 'SAP_BC_CSMREG' (if it doesn't exist) with the following authorization objects
          --> S_CCM_RECV (with the objects and values mentioned in the above note)
          --> S_RFC (with the objects and values mentioned in the above note)
          --> S_RZL_ADM (with the objects and values mentioned in the above note)
          --> S_CUS_CMP (with the objects and values mentioned in the above note)
     b. Create a 'communication' user CSMREG (if it doesn't exist) and assign the profile S_CSMREG
5. Create the user CSMREG in Solution Manager using RZ21 transaction
          -->RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG user (Provide the required password and confirm).
6. An agent needs to be registered in all the satellite systems that collects the monitor statistics and pass on to the Solution Manager. Before registering the agent in the satellite system, a 'CSMCONF' file has to be generated in the Solution Manager and store it in a central location which, will be used by the CCMS agent while registration. This CSMCONF file holds the communication details for the agent to talk to the Solution Manager. To create CSMCONF file, proceed as follows:
          --> RZ21 --> Technical Infrastructure --> Configure Central System --> Create Start CSMCONF for Agents
          --> Store the file in a central location that can be accessed by the satellite system/s.
7. In the satellite system, copy the file 'CSMCONF' to the working directory of SAPCCM4X (F:\usr\sap\PD1\SYS\DVEBMGS01\log\sapccm4x - for example. If the 'sapccm4x' folder does not exist, create one).
8. Copy the downloaded 'SAPCCM4X.exe' file to the kernel directory on the satellite system.
9. Execute "sapccm4x -R pf=<path of the instance profile>". This should ask for the 'CSMREG' password and the admin user password on the solution manager system. Please input the same and confirm other questions. Upon confirmation, the CCMS agent should be registered in the satellite system.
10.Make sure you establish the trusted RFC connection on the Solution Manager to the satellite system you would want to monitor. This you can do from 'SMSY' transaction.
11.After successfully creating the RFC connections, and assigning the system to a logical component, please go to transaction, 'SOLUTION_MANAGER'. You can see the monitored system in the System Overview.
Below are the reference links:
Weblogs Related to Solution Manager
Hope this helps. Award with relevant points if my response is helpful.
Thank you.

System Monitoring and CCMS Monitors

In our production environment we have working CCMS Monitors set up thru RZ20.
However if I go to solution_manager->system monitoring->operations tab, there are no alerts displayed on the page. Does system monitoring use the same backend as CCMS Monitoring? I am a little bit confused on this. If we set up System Monitoring, will this duplicate the CCMS Monitors we've previously set up?

If you want to see alerts on Operation tab in solution_manager->Solution Monitoring->System Monitoring you first need to run "Setup System Monitoring" (link is just below tab Operation or run in from Operations Setup tab). Setup will not duplicate CCMS monitors. It will just mark which of the available alerts should be taken into account for solution_manager->Solution Monitoring->System Monitoring report.
This might help you to start:
http://help.sap.com/saphelp_smehp1/helpdata/en/5b/0c9ccfd262427685c245d7ea85cd7a/content.htm

System monitoring - DSWP and RZ21

Hi all,
I am using sap solution managers workcenter "System monitoring" to set up the sap monitornig for a huge landscape. This works well, but to receive alerts (e.g. per mail) I additionaly have to do the settings in RZ21 (assign central autoreactions). This is not very comfortable because each setting has to be done twice (in dwsp and rz21) and there is also the risk to forget something. Do you know any other possibility? Do you know about plans to integrate the functions of RZ21 into DSWP?
Thanks
Michael

HI
We are setting up system monitoring is solman? i do have the same doubt as mentioned earlier
>
Karthik Bhirraju wrote:
> Please let me know whats the diffrence in configuring CCMS alerts in RZ21 (CEN- SOL) and configuring CCMS in(CEN- SOL) Solution Manager -> DSWP -> Solution Monitoring ?? is Solman-> Solution Monitoring a shortcu way or a WIZARD way to RZ21 (creating CCMSUSR, CCMSREG .. etc what ever we do in RZ21) or we need to configure RZ21 as prerequisite to configure solution monitorind in DSWP
can anyone guide me here? and what would this affect the RCA setup
jansi

System monitoring configuration in solution manager EHP1

Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
Rohit

I'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt

Do not see Set-Up System Monitoring Button

Similar Messages

Maybe you are looking for