Do not show the # values should be replaced with blank at report

Dear All,
There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
any suggestions please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
Thanks & Regards
sathish

Hi Satish,
There is one tcode where u can keep ur symbol defined say blank to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
but it will effect not only this query but all the queries so it is upto u....
and at cube level u can write a routine to check ...
if this field value is initial .
change it with blank
else
leave it.
hope it helps...
regards
vamsi
Edited by: vamsi talluri on Mar 15, 2009 10:33 PM

Similar Messages

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Query is not showing the values - authentication error

Hi,
After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
Notification Number BRAIN 800
<b>Can u pls tell me the solution.</b>Thanks and Regards,
Giri.

Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter

Value help on a published CR do not show the value help as an hierarchy.

Hello experts,
we published a CR based on a Bex Query to the BW role and to BOE. The parameters on CR are based on Bex Hierchy variables. If we logon with an SAP User (with SAP_ALL) on Info View/ BI Launch Pad to execute the CR the value help shows the hierarchy correctly.
+ world
+ North Amerika
+ Western Europe
+ Asia
If we logon on to Info View / BI launch Pad with a normal SAP Enduser (without SAP_ALL) but with all needed End User Roles the value help shows a flat List....
World
North Amerika
Western Europe
Asia
We try to trace this authorization issue but we do not got any clearly results.
Maybe someone knows the needed authorization Object on BW....?
Regards Michael

Hi,
the authorizations are documented in the installation guide for the SAP Integration Kit and the authorization trace should show it as well
ingo

Replace # with Blank in report output

Hi,
I am using BI7 and WAD. When there are no values for the variable, system is showing # instead of a blank. How to change this? Pl. suggest
Regards
Jayaram

Hi Jayaram,
Go to transaction RSCUSTV4. Remove the # key and it will not appear for your reports. Or if that doesn't work you can try this:
http://sap-img.com/business/removing-hex-sign-in-analyzer-report.htm
Hope this helps,
Juice

Filters not showing up values

Hi Gurus,
I am working on some reports in WAD.
I have characteristic "Region" which has 4 values like EAST,WEST,SOUTH,NORTH. This is a User Entry so I created a variable for this and it shows the values with check boxes beside it when you click on the variable entry screen input help. Once I execute the query the result is displayed. When I click on the Filter ICON on the Navigation Block for REGION it is not showing the Values for this region but just shows only 4 check boxes.
This Characteristic doesnot have master data. It is displaying the KEY values.
For the characteristics which Master Data it is showing the values both in Varaible selection screen and also in Filter Selections.
Please update me with a solution.
Thanks,
Raj

have you tried replacing it with the file essbase.bak_startup file, instead of the older essbase.sec file?
If you check your app folders you will still be able to see the cubes you had created its just that Essbase can't pull those up with the older .sec file.
The essbase.bak_startup file is always updated everytime the Essbase server is started up.
Be sure to take a backup of the file before starting up the server again.
The reason your essbase.sec and essbase.bak files are both corrupt is because when you first discovered that the essbase.sec file is corrupt it was when you started the server up.
What you need to keep in mind if the machine which holds the essbase server shuts down abruptly or crashes (which usually leads to the situation you are in) is to never start up the Essbase server right away, as you may have a corrupt essbase.sec file, and if you start up the server without taking a backup of the essbase.bak file you may risk corrupting the essbase.bak file as well.
This is because at start up the essbase.bak file gets replaced with the essbase.sec file.
let me know if this works.
Regards,
Anindyo

Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
involving all list items) are currently prohibited.
Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
Prashanth

Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

AFAR test run showing the values but not posting in Real run.

Hi Friends,
i have an issue with AFAR recalculating the depreclation. The details are as below;
1. Asset value date is 15.07.2010. but ordinary dep. start date was set as 01.01.2010 manually by the user.
2. The Period control method 11, the dep. is calculated for entire year for acquisition.
3. we have already calculated depreciation from period 12 2010 to period 04, 2011.
4. Now, we have changed ordinary depreciation start date for 5 asset records from 01.01.2010 to 15.07.2010.
5. Therefore, we recalculated AFAR for these assets for 2010 and test run is showing the values for these 5 asset. The same was expected by the business.
6. When we execute the real run, it is not posting and no change in asset explorer for period 12, 2010 or in current period. No error message is available in spool / job log.
We have opened FI periods as well.
My question is that why the system calculating the values in test run and if it is calculated in test run, why it is not posting in update run?
As per the period control method, the depreciation should not recalculated for half year even we change the ordinary dep,start date from 1st Jan to 15th July.
I request you to clarify my doubt and help me to understand the error which is stoping the values in update run of AFAR.
Best Regards,
Padmaja

Hi,
Sorry...it is not worked out. Alternatively, i tried the shift factor with variable depreciation and i achieved the values which appeared in AFAR test run.
Thanks for the help.
Regards,
Padmaja
Edited by: PadmajaCH on May 19, 2011 3:26 PM

In smartforms the quantity field is not showing the perfect value .

In smartforms the quantity field is not showing the perfect value because the point is shifting left
insted of showing 8.10 it is showing 80.00.

Hi,
Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
Regards,
Rohan.

The parameter 'host_name_full' of ICM not showing the right value

Hi ,
The parameter 'host_name_full' is not showing the correct value.
It is still showing the value as fully qualified domain name, where as we have reverted the setting some time back .
can anyone let me knwo from where does it pick up the value from .
and how can i Edit the value to show the correct value
Thanks
Nikhil

Hi Nikhil,
Check this 2 links will be useful to u r query...
http://help.sap.com/saphelp_nw04/helpdata/en/e7/7af83b0255a206e10000000a11402f/content.htm
http://www.basisconsultant.com/modules.php?name=Content&pa=showpage&pid=12
Regards,
Sridhar

Workflow status column is not showing the internal status values (Inprogress, Started, Suspended, Completed)

I've created SPD 2013 workflow and deployed them onto that document library, This workflow execute on item update event. When updating library item, workflow triggered and completed successfully but workflow status column is not
showing the Internal Status values rather it is showing the Stage information. I've unchecked the "Automatically update stage name on workflow status" and republished the workflow. After that, it is still showing the stage information. Any help
is really appreciated.

Hi Venkadesh,
It is by design that 2013 workflow will show stage name in the workflow status column when
Automatically update the workflow status to the current stage name is checked.
And the workflow status column will be blank when Automatically update the workflow status to the current stage name is unchecked.
For existing workflows, the workflow status will still exists with the previous values after unchecking Automatically update the workflow status to the current stage name.
We can use Set Workflow Status action to update the workflow status value based on our needs.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HT4623 my iPad does not show the Airplay icon. The software is iOS 7.0.4, I have home sharing turned on and have an Apple TV. What should I do?

my iPad does not show the Airplay icon. The software is iOS 7.0.4, I have home sharing turned on and have an Apple TV. What should I do?

If you don't see the AirPlay icon in the Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay

Filters 'OR' function not passing the values to the sql

Hi,
I am facing an issue with the 'OR' function on the filters that are used in the reports.
The report needs to fetch all the records on the three tables as the user enters the value in the dashboard prompts.
eg: [   update_dt_A1 is prompted
and user_name_A1 is prompted ]
or
[    update_dt_B1 is prompted
and user_name_B1 is prompted ]
or
[    update_dt_C1 is prompted
and user_name_C1 is prompted ]
The values entered in the dashboard prompt gets passed to the filter, but the vaules are not passed over to the SQL that runs on the database, hence the reports shows all values and does not reflect the values entered.
When the 'OR' function is replaced with 'AND' the values get passed to the SQL.
Can anyone help on what is the issue on the filters?
Thanks

Here is how my Filters are set up
Vendor Name is Prompted
AND
Vendor Number is Prompted
AND
[   [Last_update_date_Vendor is prompted
AND
User_name_Vendor is prompted]
OR
[Last_update_date_Site is prompted
    AND
    User_name_Site is prompted]
OR
[Last_update_date_Bank is prompted
    AND
    User_name_Bank is prompted]
The values from the dashboard prompts gets passed to the filter, but the sql that runs does not take the values in the where clause.

Report similar to MC$4 that does not show absolute values

Hi all,
We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
Thanks in advance!
George

HI
Your input criteria should contain all plant numbers and the period to be analyzed. Execute the report and then select: Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month. Follow the options to export to Excel. Report will be based on Plant, Storage location and Month.
Regards

BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert
I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_UpdateInsert
I have a html page in a secure area with a jQuery ajax soap script.
I get the this error when I run the script:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Server did not recognize the value of HTTP Header SOAPAction: https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert.</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope>
I have also tried to add a header with the Soap action with the beforeSend in the ajax call.
This must have been solved before I suppose?
Here is my script:
<!DOCTYPE html>
<html lang="en">
<head>
<title>Test SOAP Request</title>
    <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery-cookie/1.3.1/jquery.cookie.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/underscore.js/1.5.1/underscore-min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/backbone.js/1.0.0/backbone-min.js"></script>
    <script type="text/javascript" src="//cdn.worldsecuresystems.com/bcapi/bcapi-0.0.1.min.js"></script>
</head>
<body>
<script>
var wsUrl = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
var soapRequest =
'<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
    <Product_UpdateInsert xmlns="https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice"> \
      <username>myEmailAdress</username> \
      <password>mySecretPassw</password> \
      <siteId>1894001</siteId> \
      <productList> \
        <Products> \
          <productCode>ZJAWEyuuyN</productCode> \
          <productName>My test product</productName> \
          <description>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.</description> \
          <smallImage>/images/product1/small.jpg</smallImage> \
          <largeImage>/images/product1/large.jpg</largeImage> \
         <cataloguesArray> \
             <string>/Store/</string> \
          </cataloguesArray> \
          <pricesSaleArray> \
            <string>US/19.95,3/17.96,7/16.96</string> \
          </pricesSaleArray> \
          <pricesRetailArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesRetailArray> \
          <pricesWholesaleArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesWholesaleArray> \
          <wholesaleTaxCodeArray> \
            <string>US/0.00</string> \
          </wholesaleTaxCodeArray> \
          <taxCodeArray> \
            <string>GB/VAT</string> \
          </taxCodeArray> \
          <groupProducts> \
            <string>580H0036BL</string> \
            <string>ACAI60</string> \
            <string>ABC-123</string> \
          </groupProducts> \
          <groupProductsDescriptions> \
            <string>Lorem ipsum dolor sit amet</string> \
            <string>consectetur adipisicing elit</string> \
          </groupProductsDescriptions> \
          <supplierEntityId>1234</supplierEntityId> \
          <supplierCommission>0</supplierCommission> \
          <weight>30</weight> \
          <tags>NEW!</tags> \
          <unitType>string</unitType> \
          <minUnits>0</minUnits> \
          <maxUnits>2</maxUnits> \
          <inStock>43</inStock> \
          <onOrder>3</onOrder> \
          <reOrder>2</reOrder> \
          <inventoryControl>true</inventoryControl> \
          <canPreOrder>true</canPreOrder> \
          <custom1>Text in custom field 1</custom1> \
          <custom2>Text in custom field 2</custom2> \
          <custom3>Text in custom field 3</custom3> \
          <custom4>Text in custom field 4</custom4> \
          <popletImages>/images/image1.jpg;/images/image2.jpg;</popletImages> \
          <enabled>true</enabled> \
          <deleted>false</deleted> \
          <captureDetails>true</captureDetails> \
          <downloadLimitCount>20</downloadLimitCount> \
          <limitDownloadsToIP>0</limitDownloadsToIP> \
          <isOnSale>true</isOnSale> \
          <hideIfNoStock>true</hideIfNoStock> \
          <productAttributes>Size*|5|Y:L||UK/2|US/20,S||UK/1|US/10</productAttributes> \
          <isGiftVoucher>false</isGiftVoucher> \
          <enableDropShipping>true</enableDropShipping> \
          <productWeight>0</productWeight> \
          <productWidth>0</productWidth> \
          <productHeight>0</productHeight> \
          <productDepth>0</productDepth> \
          <excludeFromSearch>false</excludeFromSearch> \
          <productTitle>My product title</productTitle> \
          <cycletypeId>3</cycletypeId> \
          <cycletypeCount>-1</cycletypeCount> \
          <slug>my-product</slug> \
          <hasVariations>true</hasVariations> \
          <variations> \
            <ProductVariation xsi:nil="true" /> \
            <ProductVariation xsi:nil="true" /> \
          </variations> \
        </Products> \
      </productList> \
    </Product_UpdateInsert> \
</soap12:Body> \
</soap12:Envelope>';
$.ajax({
     type: "POST",
     beforeSend: function(xhr){xhr.setRequestHeader('SOAPAction', 'https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert');},
     url: wsUrl,
     contentType: "text/xml",
     dataType: "xml",
     data: soapRequest,
     success: processSuccess,
     error: processError
function processSuccess(data, status, req)
   if (status == "success")
   alert("Success!");
function processError(data, status, req)
   alert("Failed!");
   alert(req.responseText + " " + status);
</script>
</body>
</html>

This line is a target namespace so it should not be changed: <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> It is very easy to think that it's a placeholder and that it should be replaced with your own url, which it should not and which will fail.
This works now:
<!DOCTYPE html>
<html lang="en">
    <head>
        <title>Test 7 SOAP Request</title>
        <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    </head>
    <body>
        <script>
            var SoapMessage = '<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
<Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> \
<username>Your Email</username> \
<password>Your password</password> \
<siteId>1894001</siteId> \
<productCode>HHKDKXS5MB</productCode> \
            </Product_Retrieve> \
            </soap12:Body> \
            </soap12:Envelope>';
            var url = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
            $.support.cors = true;
            $.ajax({
                type: "POST",
                url: url,
                data: SoapMessage,
                dataType: "xml",
                processData: true,
                contentType: "text/xml; charset=\"utf-8\"",
                success: function (msg) {
                    alert("suc: " + msg);
                error: function (msg) {
                    alert("Failed: " + msg);
        </script>
    </body>
</html>

Do not show the # values should be replaced with blank at report

Similar Messages

Maybe you are looking for