Do not turn off only restarts
iphone 4s 64 gb ios 5.0.1 - do not turn off. Only restarts
See if you can reset it (hold on/off and home buttons until you see the Apple logo - ignore the off slider that appears first - then release). If you can't, put it in recover mode and restore it: http://support.apple.com/kb/ht1808.
Similar Messages
-
TS1538 the issue with my phone is that it will not turn off, or restart, and do anything
When the article was talking about restarting your phone/ipad/ipod touch, i can't because it only has a glowing apple with an empty loading bar and won' do anything else
Press the Home menu button and the power button until you see the apple sign. Then put it back on.
-
Hi, before 3 months when I start to play any video or music to listen, I could not hear any sound. if I want to play video as handsfree mode it s not possible to hear any sound other problem is it s not turning off. When you want to turning off it s restarting...please help me.
Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows). -
i have installed mountain lion. No problem with the instalarrion.
Now when i want to turn off my Mac mini, it restart and not turn off.
What happen?
Alain Hermosilla Ringger
ChileI reply to my self
I have a mac mini late 2009 with Mountain Lion
I solved this problem disabling the second monitor from the dvi conection and conected it again with the vga plug in. My main monitor also conected by a hdmi plug to my mac mini
My mac mini turn off with no problem now and the rebbot loop disapear
Alain Hermosilla
Chile -
My ipod will not turn on, only the apple sign will show up an then it turns back off.
If not succesful try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanksReset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together. -
I paused the movie download but did not turn off my IPad. When I returned to complete the download, the "waiting" message has been on the screen for over an hour. How can I complete the download?
I recommend purchasing lion on a USB drive at Apple Store. This will avoid all of the downloading hassles.
Also, be sure you clone your hard drive first. A lot of people want to go back to Snow Leopard and if you choose to do this cloning will make the process very easy. -
K7N2 Delta ILSR won't turn off, just restarts
K7N2 Delta ILSR won't turn off, just restarts. Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that the other machine has BIOS rev 7.6 and this one 7.2.
PSUs seem to be yr favorite subject, but I'm afraid this time it's software. I experimented some more as the problem only occured after installing the Nvidia drivers. Comparing the system settings in the device manager before installing drivers and after installing them, reveils that the problem shows up when AGP HOST TO PCI BRIDGE is installed. When killing this item the PC shuts off properly. Unfortunately when turning back on, Windows automatically reinstalls the PCI bridge and I have the problem again. LOOKS LIKE A MSI SOFTWARE PROBLEM !
By the way I have a PCI graphics board and not AGP in the failing PC (the good one has AGP graphics).
Now what?
R. -
Web sharing starts but will not turn off
I have enabled web sharing and been running successfully for a long time, recently upgraded to Lion.
The problem I have now is that I can turn Apache on through the Web Sharing prefs but it will not turn off, technically that not true as the instance is killed off but something is restarting the httpd processes (new pid's). As far as the Pref pane is concerned Apache is off (un checked box), though in reality, a new instance is running.
The only way to turn it off is by su apachectl stop.
Any ideas?
Thanks,
Adam.Have you tried to hold down the sleep and home keys for about 20 seconds or so, until you see a silver apple. See if you can get it to reboot.
-
Iphone 4 turns off, only works if charging
iphone 4 turns off, only works if plugged into charger.
Hi kthleerdh,
Welcome to the Support Communities! The article below will help with the issue you are having charging your iPhone battery.
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203030
If you can’t charge your iPhone, iPad, or iPod touch
Find out what to do if you plug in your iOS device and it doesn’t charge, or it displays an alert.
Make sure you’re using Apple-certified accessories and the right power source.
If your battery is really low, you might see a black screen for a few minutes even after you plug it in. Let it charge for at least 10 minutes (20 minutes for iPad). If it still doesn’t charge, follow the steps below.If the battery doesn’t charge
If the battery doesn’t charge, unplug your device and try these steps:
Look at the connector at the bottom of your device and make sure it’s free of debris.
If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
Try a different USB cable, USB power adapter, or USB port.
If everything seems to be working, reconnect your device and wait for 30 minutes.
If your device still doesn’t charge, try to restart it while it's connected to power. If you can't restart, reset your device.
If you see an alert
When you plug in your device, you might see one of these alerts:
“This cable or accessory is not certified and may not work reliably with this iPhone.”
“This accessory is not supported by this device.”
If you see one of these alerts, unplug your device try and these steps:
Look at the connector at the bottom of your device and make sure it’s free of debris, then reconnect the USB cable.
If you still see an alert, try a different USB cable or charger.
Get more help
If your device still doesn't charge or you still see an alert after trying the steps above, contact Apple Support.
Cheers,
Judy -
I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer, itunes does not automatically open when I plug in the USB. I can not turn off Keychain in my ipad since authorization is pending awaiting the code sent by SMS, which I can not get. Can someone advise how to get rid of Keychain. Should I cancel my icloud account?
I appreciate your help.
Have reset the ipad, but that changed nothing. I can not turn off Keychain, iit remains "pending approval". Probably, the only thing to do is to close my icloud account...which I hate to do since there is a lot of data saved there. But, I am unable to back the ipad up on my Windows 8 computer because itunes no longer opens when the ipad is attached.
Oh well...computers are computers and it is impossible to cover 100% of the situations.
Keychain iss not the best app for someone who lives in 3 different countries.
Thanks -
Urgent, Ipod video will not turn off at all. everything tried.
My new 5.5 gen ipod video is not turning off at all, i tried restarting it and it didn't work, i put sleep in my menu and that didn't work! HELP DOES APPLE STORE REPLACE IT?
CAUSE I DONT HAVE THE ORIGINAL BOX AND RECIEPT ANYMORE!!!!gee dude, i dont know. id love to help u but my ipod has never done that. so i dont know
did u try pressing MENU+'CENTER BUTTON' at the same time for about 5 seconds to reset it?
gotta go, my mom's gettin' ******----ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ -
OS: Yosemite
Model: MacBook Pro (Retina, 15-inch, Late 2013)
Issue: Dark Mode not turning off
Anyone else have an issue turning off dark mode? Mine isn't turning off. I uncheck the option in General, but nothing happens. When I close and reopen General preferences the option is once again checked.
I added a screenshot.
Message was edited by: DDeVitoI have a weird sleep issue that just started, I've built a new PC, Win7x64 and just noticed this happening. When I put the computer to sleep manually, the machine looks like it goes to sleep, but the fans keep running and it 'sounds on'. If I wake the PC,
then put it right back to sleep, it goes into deep sleep and the fans go off. Nothing I can see is keeping it awake, I have a i5-2500k, Asus P68 deluxe mobo, and it seems to be a repeatable issue. If the PC wakes up by itself to do something, then goes back
to sleep on its own (times out) it goes into deep sleep. It's only when I manually do it that it has the issue. Anyone ever seen this? Thanks!
/curt
Curt Kessler Franklin Loan Center
I had the same issue a while ago. It ended up being because I added my network printer to the printers folder by clicking 'add a network printer' rather than 'add a local printer'.
When I added a 'local' printer (and pointed it to the IP Address of the printer) the sleep issue went away. Both methods (network/local) were able to print to my network printer, but the network printer option would result in my fans never spinning down.
Weird, right?
-Kramy -
why is my screen not turning off during a conversation - when I put it to my ear the screen does not turn off and I touch the hold and all the other buttons while talking. I tried switching it off and restarting it .
thxTry a reset, hold home button and sleep/wake button down together until phone shuts off. Release the buttons when this happens and the phone should come back on. Give it minute to turn on completely and then do a test call to see if it is still happening. May need to do a restore but definitely back up the device before doing that.
-
Please help - Everything works fine with the Nano when it is connected to laptop. When not connected, all works but it can not be turned off - only put in pause. If I connect back to laptop, I can turn it off just fine. I have reset, restored, etc. with no luck. Please - any help out there??
Hi DHNano,
Since you've already done a restore, then skip the following steps.
1. Press Menu
2. Select the 3rd item from the bottom of the list which is "Settings".
3. Scroll all the way down to the bottom and select the last item which should be "Reset All Settings".
4. Then select the second item which is "Reset".
Leave your iPod on overnight until the battery is fully drained. Sometimes this may reset other things. Then plug your iPod to your computer for at least three hours and let us know what happens.
If the condition still exists, then the only alternative would be to visit the nearest Apple Store:
http://www.apple.com/retail/
...or have your iPod serviced:
http://depot.info.apple.com/ipod/
Gary
Maybe you are looking for
-
How can i move CD audiobooks over to my "audiobooks" category?
Hello! When I download an audiobook, it is very helpfully automatically moved to the "audiobooks" folder. However, when I import one from CDs, it will not move over to the "audiobooks" folder! Does anyone know how to accomplish that? Thanks in advanc
-
iphone is dead, gone to insurance co. for replacement. They say because "Find My iPhone" is still active, they can't replace or try to fix it. problem is can't log in to de-activate it, cos email account does not exist anymore. How can I de-activate
-
I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error. The value returned from the load function is not of type numeric. The error
-
Problem with a db sequence in DBAdapter (OSB)
Hello, I'm having problems with a dbAdapter every time I make a installation in a new environment. I have a dbadapter that increments a db sequence (custom sql: select seq_onl_audit.nextval from dual) but every time I install the service in a new env
-
How do I remove a calender I´ve subscribed to in iCal?
I can delete all other calenders, but not this one... Christina