Do not update in qty for asset transaction

Dear all,
the system update the qty field in asset master data when transaction take effects. But there is any why that qty field in asset master data do not update  after transaction takes place like when transfer from one asset "a" to asset "b" with t code ABUMN.
asset a with qty 1 and asset b with qty 2 in the master record,
when transfer from a to b the system must not update the qty field in asset master data that the system updates to 3.
How can the system do update qty ?????
regards

Hi,
This is the standard behaviour of the system.
If a transfer takes place from asset X to asset Y, then the system adds the sending asset's qty to receving asset's qty, only if the both UOM are same.
Often users create an asset master with values in qty fields also, but that qty field should be blank only, since the qty will be added to it through asset transaction only.(if earlier qty is 0 and transaction qty is 1, then it would be 0+1=1)
In your case you might have created your second asset with 2 qty and transfered 1 qty from sending asset, so the system added the both quantities in receiving asset. ( 1+2=3), as you are aware of this.
Thanks,
Srinu

Similar Messages

  • RCV transaction processor not updating quantity delivered for requisitions

    We are converting PO receiving transactions using PO details for each transaction. Each PO is having requisition(s) attached to it. Open interface program is not updating quantity delivered for requisitions attached to it but transactions get created successfully.
    However, from iprocurement if we receive the items for requisitions it is updating the quantity delivered column.
    Are we missing something??

    Hi,
    If you enter the receipt manually in Forms (not in iProcurement) referencing the Purchase Order, is it than behaving the same as the converted receipts?
    Regards,
    Marcel

  • MR 11 not updating the invoicing for services

    Hi All,
    I have a scenario where the client uses MR11 for clearing the invoices.
    He does not use MIRO for invoicing.
    During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
    I have checked the Service based IV and the GR based IV in the  invoice tab of PO.
    Can you please advice me as to why this is happening only in case of services.
    Thanks and Regards
    Sridhar.

    Hi Charlie,
    Thank you very much for the response.
    Actually I am looking for the IR reduction and not the GR reduction.
    The note you have mentioned applies for GR reduction.
    Also we are in the ECC 6 environment.
    Please update me with further information.
    Regards
    Sridhar

  • Document type for Asset Transactions

    Hi,
    I would like to know where the document types for asset transactions i.e acquisition, transfer,retirement are defined.
    Thanks
    Suresh

    Hi,
    A073
    A074
    A076
    A077
    Best Regards
    Ashish Jain
    Message was edited by:
            Ashish Bohara

  • Not enough disk space for asset ecoding

    Hi all,
    I have a dvdsp project with:
    a feature: 3.3 gb
    dvd extra: 289
    menu assets: 65mb
    and shows that it is 3.8 mb all together, but when i try to build/format it stops the build at the menu and gives the error message: Not enough disk space for asset encoding. I was running a test build when this happened. i have yet to add the audio for the extra thinking i still had some room on here to work with.
    I have burned dvd's up 4.5 without any issues. any ideas why this is happening?
    thanks,
    Mark

    I'm having the same problem. Except I have tried to switch locations for the Current Build and each time it says Not enough disk space for asset encoding. I have a 500GB raid with almost 400GB free and then another 500GB raid with about 130GB free. I really need help on this pronto!
    Another message it now brings up after it starts Encoding Assets: Insufficient disk space for encoding. Please free up disk space on your encoding target drive. Please Help!!
    Message was edited by: PapaSnowSmurf

  • "not enough disk space for asset encoding" error message

    I'm using DVD SP 4.2.1 and trying to burn a DL DVD. Every time I try to build the TS folders somewhere, I get the "not enough disk space for asset encoding" message. I have PLENTY of space (over 100GB) where I'm assigning it to create the TS folders. I don't understand why I'm getting the message. Your help is appreciated.

    Max,
    I think you're onto something here. I noticed that the original disk (an old Iomega Peerless 20GB removable hard drive) was nearly full. I also saved the DVD Studio Pro file for the project to the same drive. I think that, somehow, the application looked to that drive to do something and got a "disk full" message from that disk and gave me the error.
    The workaround was to transfer all the assets AND the project file to another hard disk with plenty of space (over 100 GB). The settings for the DVD Studio Pro encoding process remained the same…my computer's internal hard disk with its 30 GB of free space. I re-linked the assets and the disk building and encoding process went smoothly and I'm now the proud owner of a finished DVD.
    There's probably something lurking in the background here, but this worked for me.
    Thanks for making the suggestion to look deeper! My problem is solved!
    Kevin

  • Windows7 will not update it ask for a cd for ofv

    windows 7 will not update it asks for a CD for OFV 

    Hmmm. I might need some more specific information to help answer this for you. Are you trying to upgrade from Windows Vista to Windows 7?
    I am an HP employee.

  • Main Menu:Not enough disk space for asset encoding

    i tried to burn my project first i got an error that in track 1 i've got no assets/videos and i added an asset, then a problem with the story and dragged the same story in both columns.. now i tried to burn again and got this error
    Main Menu:Not enough disk space for asset encoding
    Build cancelled
    Building was not successful. See log.
    any help appreciated. Thanks in advance

    Sounds like your hard drive is getting full. You need as much space on your drive as you can get - at least as much as the disc contents, twice. If you are burning a DVD-R at 4.7Gb then allow ten Gb free space before you start.

  • TS3694 I can not update my iphone for resone 3004

    I can not update my iphone for resone 3004

    https://discussions.apple.com/thread/4034118
    http://support.apple.com/kb/TS3694
    https://discussions.apple.com/message/23024319#23024319
    https://discussions.apple.com/message/23023773#23023773

  • Apps are not updating,keeps asking for Apple ID,can anyone help?

    Apps are not updating,keeps asking for Apple ID and then goes back to saying update?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Accounting Document not updated in BKPF for JV by J1IH

    Hi
    The user posted JV through transaction code J1IH.
    The document number is updated in table J_1IPART2 but when the user is trying to see the same document in FB03 we are getting the error message as "the document is not exist or not archived".
    And we have checked in tables BKPF and BSEG we did not find this document.
    Can anyone please suggest how to find the reason why the system is not updated this document?
    Regards
    RS

    Hi Hari,
    Thanks for your reply. I have checked in this transaction code also. The system is showing the message as "The document is already posted".
    But it is not updated any tables except the document number is updated in table  J_1IPART2.
    Is there any other reasons for not updating the tables.
    Regards
    RS

  • Condition value not updated when qty changed

    hi all,
    I have created a new condition ZPR1 (copied from PR00) and use a new formula for it.
    There is a problem when I change the qty after the item is billed.
    Suppose the original qty is 1 and total ZPR1 price is 100. When I change the qty to 2, the ZPR1 price is still 100! It will change to 200 if the item is not billed.
    Anybody encounters such problem and how to solve?
    Thanks

    Hi,
    I don't mean to change the unit price.
    I mean the condition value (the item total price) is not updated
    You can't change the price anymore in the condition tab after you billed
    But when you change the qty of the item, the total value should change accordingly
    And I think for my case I should not cancel the invoice. Suppose original qty is 10, and there is partial shipment of 7 and billed the customer. Later customer request to reduce the qty to 7 to complete the item. We should not cancel the invoice in this case.
    Try to test with PR00 and PN00, you will see the item value will be changed according to the item qty.

  • Not updating PLA Balance for a month

    We are Extracting PLA Register from  J2I6 for Excise Group XX  , It showed  negative  value in August 2011 , so we went thorough table where PLA balances get updated & can be seen on transaction basis.
    In Table J_2IACCBAL  , we have found some registers is not getting update in July.
    For example
    - Register PLAAT1 on 03.07.2011- Opening balance is  0 .00 while Closing Balance is on 09.06.2011- Rs. 28014.00 , there is no transaction between 10.06.2011 &   02.07.2011.
    Kindly Suggest

    iTunes is using the feed at
    http://feeds.feedburner.com/LiberalArtsRadiowithMarkSutton
    Feedvalidator says the feed does not validate and throws up several errors which may be minor: as the feed has no line returns in it it's almost impossible to read (though this doesn't affect its validity).
    However, the URL for your latest episode is given as
    http://www.liberalartsradio.com/audio/17June242009/
    in the 'enclosure' tag, and this is not a media file (click on the link above and you will get a list including the media file). I would have expected that iTunes would have shown the episode, but just been unable to provide a media file for it, but since subscribing manually doesn't show the entry for June 24 I suppose that iTunes is not recognizing the episode because there is no media file present.

  • Batch Characteristic not updating with result for linked MIC

    Hi,
    I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
    If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
    If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
    Can you help regards?

    Ok. I am a little bit further.
    I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
    In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
    Hope that this can help to solve my problem.
    Regards,
    René
    @ Mayank
    Above, all the master data and customizing is mentioned to transfer the result to the batch classification
    Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

  • WBS not updated during MIRO to asset

    Dear Gurus
    Our task is to post invoice directly to asset using ME21N->MIRO (without delivery) approach and get statistical WBS element commitments and actual values updated.
    Commitments (ME21N with AAC "A") are working fine (using statistical cost element 90cat.)
    During invoice posting (MIRO) no error generated; asset is capitalized with actual value; WBS element commitments reduced; BUT WBS element actual values not updated.
    Configration:
    1. Account assignment objects PS_PSP_PNR and PS_PSP_PNR2 activated
    2. Acc.assign. objects specified in used depreciation area as "01 APC values posting" Acc.assign. type
    Where could be the problem?

    I agree, but in our case receipt (MIGO) is organizationally useless. And I don't want to belive this is the source of the problem. But I could be mistaken.
    By the way I tried simulate process with MIGO - same issue.

Maybe you are looking for

  • READ_IMAGE_FILE in Oracle Forms6.0, Code added

    Hi, I have two tif files one is compressed in Lempel-Ziv and another is not. Now READ_IMAGE_FILE does not read the image compresses in Lempel-Ziv file but does read the other tiff files. Also the size of the tiff file with Lempel-Ziv compression grea

  • Help needed in J2ME GUI...

    I used Canvas to display shapes in an EMulator. In the output, i got the list of MIDlets to execute and then i selected the canvas MIDlet(the MIDlet that i created using CAnvas), then the shapes ( REctangles) are drawn over the First SCreen (SCreen w

  • Making a slide-show disk with music self-playable

    I have burned a slideshow disk with music through Keynote. In "Inspector", I made sure that zI selected "self-playable" before recording and saving it. However, when I put the disk in my iMac, the icon appears on my desktop, I click on the icon, a wi

  • Header Billing Plan Net Value is blank- Any solution?

    Dear Gurus, I have a Periodic Billing plan and have entered the pricing values on at item level. The item billing plan is ok, but I can not see the net value on the header billing plan, is blank Does anyone know what the issue can be? Thanks Iñigo

  • Combine 2 rows into single row?

    I have a table A which has information related to a process. For process completion there exist 2 rows. One has in it the total elapsed time, the time the entire process (which is multipart) begin and end time, but the columns related to rows process