Do not use SOAP Envelope checkbox, MainDocument set as MainAttachment after call the receiver adapter

Hi experts,
We have a Proxy to SOAP scenario and we have the same issue mentioned in this post and in note 1522630, the version is SAP PI 7.31 (AEX). We configured 2 XSLT mappings and we use the MessageTransformBean (Transform.ContentType=text/xml;charset=utf-8) before call the standar module for SOAP receiver adapter.
Everything looks good but in the payload appears MainAttachment (in SAP PI and SXI_MONITOR in SAP ECC 6.0 SAP_BASIS 731) and the proxy can´t read the response for this reason.
This is that we see in the message content:
<sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink'><sap:Payload xlink:type='simple' xlink:href='cid:[email protected]'><sap:Name>MainAttachment</sap:Name><sap:Description>Main document</sap:Description><sap:Type>Application</sap:Type></sap:Payload></sap:Manifest>
Do you have any updates of this problem or any suggestion?
Thanks and regards.

Hi Sriram and Mark,
Thanks a lot for your help.
After a lot of test we solve the problem.
We are using an Integrated Configuration and the keepAttachment checkbox is not necesary.
The problem was that the value "ns0" in the message type of the xml was not added by the XSLT mapping(altova), we added manually in the xsl file and the proxy read the information.
The message content was not changed and looks like an attachment, also y sxi_monitor looks as MainAttachment in the payload but is interpreted good.

Similar Messages

How to capture SOAP fault when using "Do not use SOAP envelope" parameter

Hi,
we have a synchronous RFC -> XI -> Web Service scenario. The Web Service requires some custom SOAP header elements for user authorization which forced us create the entire SOAP message in a message mapping and to set the "Do not use SOAP envelope" parameter in the receiving SOAP adapter.
In order to capture the SOAP fault message from the Web Service we have created a message interface with a fault message and also created an interface mapping with a fault message mapping.
Our problem is that the fault message is not populated when we get a SOAP fault message back from the Web Service. Is this due to the fact that we have set the "Do not use SOAP envelope" parameter?
Thanks in advance!
Stefan
Message was edited by:
Stefan Nilsson

Hi Bhavesh,
I have exaactly same scenario. But the only difference is that the Successful payload is also not coming into PI.
The request is successfully hittng the webservice.
Please guide me on how to capture the paylod.
I am using the WSDL provided by the thirdparty but sill the message is not coming into PI.

Problem in mapping while using Do not Use SOAP Envelope

Hi All,
This is wrt my thread 'Removing and adding SOAP Envelope'
I am currently working on SOAP-XI-Proxy Scenario.
For some un avoiadable reason, I had to use the option 'DO not use SOAP Envelope' .So the SOAP Envelope came withen the payload and in the pipeline, I can see the payload prefixed by '<?xml version="1.0" ?>' .
Now my payload looks like
<?xml version="1.0" ?> ( no more the encoding="utf-8" notation is there)
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<Complaint_Request xmlns="urn:******createserviceticket">
<CaseNo>12345</CaseNo>
<CustomerNo>12345</CustomerNo>
</Complaint_Request>
</soapenv:Body>
</soapenv:Envelope>
To accomodate the change, I also changed my request structure as
<Complaint_Request> (My new message Type)
 <Envelope>
 <Body>
 <Complaint_Request> (My previous message Type)
 <caseNo>
 <CustomerNo>
But I am facing problem in mapping the values to the target structure (which is a flat structure),
as the payload doesnot start with ' ns1: ' notation any more . Even XSLT mapping is not working.
When I am pasting the payload in the Testing Mapping Editor, the Source Node are correctly
formed, but all come in RED . But as the root node , ie 'ns0' is not there, the value
from child nodes are not getting mapped to the target fields.
Regards,
Subhendu

Hi Joel,
SAP says, when we use the option 'DO Not Use SOAP Envelope', the payload also contains the SOAP
Envelope. So it is obvious that the payload wont start with 'ns0' notation.
So I am searching for a solution, when we use that option.
Regards,
Subhendu

Unsing RequestOneWayBean with Do Not Use SOAP Envelope

HI All ,
I have a requriement where Ecc is calling PI with an Asyn Proxy and PI calls a Sync Webservice and gets the Response back and sends the response back to ECC in Async manner . (Async - Sync Bridge).
I need to call aWeb Service which required specifc SOAP Headers . SO I have created a Custom Structure via XSLT mapping and calling the Web Service with the Option Do Not Use SOAP Envelope as checked . I have also used the RequestResponse Bean & ResponseOneWay Bean in the SOAP Receiver adapter to make the call from Sync to Asyn. When I execute the Interface the response from the Web Service is not flowing into PI .
I am getting the error "Exception caught by adapter framework: InterfaceDetermination did not yield any actual interface" .
Has anyone worked on the ResponseOneway Bean with parameter "Do Not Use SOAP Envelope as checked" . Can some one please help me out with this issue..
Thanks
Regards
NIlesh Taunk.

HI Eng ,
I have not been able to accept the SOAP Fault Response. The link that you have provided above works for accepting the SOAP Fault . But in my case the SOAP Receiver Adapter has the Option "DO NOT Use SOAP Envelope " checked . So it is still not working in my case .
I have made all the Configurations in the Receiver SOAP adapter but am unable to get the fault response back .
Please find below the Screenshot of the Receiver SOAP Adapter.
Im my case I am able to receive the successfull response in my Response Mappping (I have created a diff ICO for Response Message and a diff ICO for Fault Message). When a fault is received even the Fault message goes to the response mapping and it fails in the response mapping as the fault structure & the response structure do not match .
Do we need to make some additional configuration for the handing faults, whn the option "DO NOT use SOAP envlope is checked" as it removed the Env from the messgaes.
Am I missing something, would you be able to have a look.
Thanks
Regards
Nilesh Taunk.

SOAP Adapter: DO not use soap envelope

Hi Guys
I have a scenario, which calls a webservice from my ABAP Proxies, the twist in this is that SOAP request expects license info into the header of SOAP envelope, I could achive this by XSLT mapping in the receiver SOAP adapter I selected the option "Do not use SOAP envelope" and could do the call.
Due to this the response received from the webservice is treated as payload, as shown below...
response message payload:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Header xmlns="http://schemas.xmlsoap.org/soap/envelope/">
 <SubscriptionInfo xmlns="http://ws.strikeiron.com">
 <LicenseStatusCode>0</LicenseStatusCode>
 <LicenseStatus>Valid license key</LicenseStatus>
 <LicenseActionCode>0</LicenseActionCode>
 <LicenseAction>Decremented hit count</LicenseAction>
 <RemainingHits>18</RemainingHits>
 <Amount>0</Amount>
 </SubscriptionInfo>
</Header>
<soap:Body>
 <getRateResponse xmlns="CurrencyRates">
 <getRateResult>44.945</getRateResult>
 </getRateResponse>
</soap:Body>
</soap:Envelope>
and when i am trying to do the response mapping, it is not able to read the value.
Anyone having any idea, on how we could do this.
Thanks
Dheeraj

Hi
I am sorry for replying in so late, was busy with some projects.
I got few mails and this post is cathing up again, so thought of giving the solution I followed without any adapter module or anything, simple plain XSLT mapping.
Integration Repository
1. Created data type and message type for Outbound Interface
2. Imported the WSDL
3. Created an XSD out of the sample response I got by calling the WSDL (this you can do from any tool available, i used the strikeiron website), pls refer below to see the XSD below, and you will have to use the message type envelope from it.
4. Most Important step, created 2 XSLT mappings, one for request and the other for response., Pls refer below for both these mappings.
5. did the interface mapping
Integration Directory
1. pls configure your scenario as normaly you do, and while you configure the communication channel for your soap receiver, make sure you click on the do not use soap envelop option.
thats it done.
XSLT Request Mapping
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP-ENV:Header>
 <LicenseInfo xmlns="http://ws.strikeiron.com">
 <RegisteredUser>
 <UserID>xyz</UserID>
 <Password>xyz</Password>
 </RegisteredUser>
 </LicenseInfo>
 </SOAP-ENV:Header>
 <SOAP-ENV:Body>
 <getConversion xmlns="CurrencyRates">
 <FromCurrencyCode>
 <xsl:value-of select="//fromCurrency"/>
 </FromCurrencyCode>
 <ToCurrencyCode>
 <xsl:value-of select="//ToCurrency"/>
 </ToCurrencyCode>
 <Amount>1</Amount>
 </getConversion>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>
 </xsl:template>
</xsl:stylesheet>
XSLT Response Mapping
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="CurrencyRates" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <xsl:template match="/">
 <ns0:MT_Cur_res xmlns:ns0="http://www.april.in/WebService/SOAPHeader">
 <Rate>
 <xsl:value-of select="soap:Envelope/soap:Body/a:getConversionResponse/a:getConversionResult"/>
 </Rate>
 </ns0:MT_Cur_res>
 </xsl:template>
</xsl:stylesheet>
Webservice Response XSD
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws.strikeiron.com" xmlns:ns2="CurrencyRates">
<xs:import namespace="CurrencyRates" schemaLocation="ns2.xsd"/>
<xs:import namespace="http://ws.strikeiron.com" schemaLocation="ns1.xsd"/>
<xs:element name="Envelope">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="soap:Header"/>
 <xs:element ref="soap:Body"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Header">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns1:SubscriptionInfo"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Body">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns2:getConversionResponse"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
</xs:schema>
let me know in case somebody gets stuck somewhere for this scenario.
Take Care
Dheeraj

SOAP scenario "Do not use SOAP Envelope" check problems

Hi Gurus!
I'm again here.
I've an scenario with SOAP Receiver, the WS do I need consume, looks like:
POST /SumTotalws1/services/Authentication.asmx HTTP/1.1
Host: xxx.xxx.xxx.xxx
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/Login"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
 <Login xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/">
 <credentials>
 <Username>string</Username>
 <Passcode>string</Passcode>
 <AuthenticationType>NotSpecified or Anonymous or NTAuthentication or Passport or LDAP</AuthenticationType>
 <AccountType>NotSpecified or WebService or WebUI</AccountType>
 </credentials>
 </Login>
</soap:Body>
</soap:Envelope>
but the response looks like:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
 <UserToken xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/">
 <Value>string</Value>
 </UserToken>
</soap:Header>
<soap:Body>
 <LoginResponse xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/" />
</soap:Body>
</soap:Envelope>
when I create my communication channel with "Do not Use SOAP Envelope" uncheck it, all run ok, but I only get in response message "<LoginResponse>" and I need <UserToken>
When I check it "Do not use SOAP Envelope" and I use XSLT mapping to add SOAP Env to request message, I get response message empty.
I tried the web Service with the message that I obtained from de XSLT mapping in the program SOAPUI. I get ok response with the <UserToken> value.
some idea to solve this problem??
Thanks in advance.
Edited by: KrlosRios on Sep 30, 2011 8:07 PM

Hi, thanks for your answer.
Can I use AXIS to execute any WS?
The WS that I tried execute looks like this:
POST /xxxx/services/Authentication.asmx HTTP/1.1
Host: xxx.240.106.39
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "http://xxx/Authentication/Login"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
 <Login xmlns="http://xxxxAuthentication/">
 <credentials>
 <Username>string</Username>
 <Passcode>string</Passcode>
 <AuthenticationType>NotSpecified or Anonymous or NTAuthentication or Passport or LDAP</AuthenticationType>
 <AccountType>NotSpecified or WebService or WebUI</AccountType>
 </credentials>
 </Login>
</soap:Body>
</soap:Envelope>
and for the response:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
 <UserToken xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/">
 <Value>string</Value>
 </UserToken>
</soap:Header>
<soap:Body>
 <LoginResponse xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/"></LoginResponse>
</soap:Body>
</soap:Envelope>
also I found in Trace node in SXI_MONITOR, jus before execute response mapping :
<Trace level="1" type="B" name="PLSRV_MAPPING_RESPONSE"></Trace>
<Trace level="1" type="Timestamp">2011-11-01T19:33:34Z UTC-6 Start of pipeline service processing PLSRVID= PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV"></Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Das Mapping wurde bereits in der Interface-Ermittlung bestimmt. </Trace>
<Trace level="3" type="T">Objekt-Id des Interface-Mappings 8594D8C2E6DA3C008F45B112FFCC86B8 </Trace>
<Trace level="3" type="T">Versions-Id des Interface-Mappings C3BB8FB0A1D511E0A688E9FCB9F06E16 </Trace>
<Trace level="1" type="T">Interface-Mapping http://xxxxx.net/pi/lms/Authentication OM_LMS_Authentication </Trace>
<Trace level="3" type="T">Mapping-Schritte 1 XSLT Response_LMS_Auth5 </Trace>
<Trace level="3" type="T">MTOM-Attachments werden nicht in die Payload überführt. </Trace>
<Trace level="1" type="T">Payload is empty. </Trace>
<Trace level="3" type="T">Dynamische Konfiguration ist leer. </Trace>
<Trace level="2" type="T">Modus 0 </Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet Response_LMS_Auth5.xsl. </Trace>
<Trace level="3" type="T">Method fatalError called, terminate transformation, because of
Thrown:
javax.xml.transform.TransformerException: java.io.IOException: Parsing an empty source. Root element expected!
 at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:250)
Say Payload is empty.
and in left directory tree, not exist "payload" node, only existe SOAP Body and in "Manifest" node looks like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Manifest wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<SAP:Payload xlink:href="cid:att-60c3078b066911e1bc1500000093b25a @sap.com">
<SAP:Name>MainAttachment</SAP:Name><
SAP:Description>Main document</SAP:Description>
<SAP:Type>Application</SAP:Type></SAP:Payload>
</SAP:Manifest>
Thanks for your help.

Do Not Use SOAP Envelope doesn't show on SOAP Parameters

Hi!..
Somebody knows why the Do Not Use SOAP Envelope option on conversion Parameters for SOAP Adapter isn't there?...I have XI 3.0 SP19 and I'd seen on a lot of notes and how's to that there is a kind of option. I need the functionality that that check does but I can't find it.
I Only have Keep headers, Keep Attachments, Use Encoded headers and Use query string.
Thanks in advance..
Carlos.

HI Carlos,
I've got same problem, which metadata should I reimport?
cheers,
Edu

Do not use SOAP envelope

I have a scenario in which a Webservice is called from PI; as the webservice request some specific fields in the SOAP-header I have found that I should check the "Do not use SOAP envelope" option in the SOAP-receiver channel.
I have searched the forum/SDN for examples of how to create the SOAP envelope including the required header fields. I have found some posts refering to XSLT-mapping; however I'm not famliar with XSLT so I'm looking for an example or guide how to create the SOAP envelope for this scenario.
Can anybody be of assistance?
Kind regards,
John.

Here is a sample of an xlst I used for this purpose.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header/>
<soapenv:Body>
 <p262:operationName xmlns:p262="http://othersite.com">
 <xsl:apply-templates/>
 </p262:operationName>
</soapenv:Body>
</soapenv:Envelope>
</xsl:template>
<xsl:template match="shippingOptions">
 <shippingOptions>
 <xsl:apply-templates select="destination" />
 <equipmentId><xsl:value-of select="equipmentId"/></equipmentId>
 <xsl:apply-templates select="origin" />
 </shippingOptions>
</xsl:template>
<xsl:template match="destination">
 <destination>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </destination>
</xsl:template>
<xsl:template match="origin">
 <origin>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </origin>
</xsl:template>
</xsl:stylesheet>

Error with Do Not use SOAP envelope

All,
I used the do not send SOAP envelope option in the SOAP receiver adapter.
Instead of XSLT, I used JAVA mapping to create the entire SOAP message ( Am more comfortable with Java and this is just a trial) , and this is the output of my java mapping with the SOAP envelope created,
<?xml version="1.0" encoding="UTF-8"?><soap:Envelope xmlns:soap="http://www.w3.org/2001/12/soap-envelope"soap:encodingStyle="http://www.w3.org/2001/12/soap-encoding"><soap:Header></soap:Header><soap:Body><ns1:GetQuote xmlns:ns1="http://www.webserviceX.NET/"><ns1:symbol>SAP</ns1:symbol></ns1:GetQuote></soap:Body></soap:Envelope>
Am using the STOCK Quote for testing purposes and this is the error I am getting when testing my interface,
<faultstring>System.Web.Services.Protocols.SoapException: Server found request content type to be '', but expected 'text/xml'. at System.Web.Services.Protocols.SoapServerProtocol.ReadParameters() at System.Web.Services.Protocols.WebServiceHandler.Invoke() at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()</faultstring>
Any directions / inputs on how to resolve this issue?
Regards,
Bhavesh

Henrique,
Tried various permutations~~ The only new error / progress seems to be for this,
SOAPAction "http://www.webserviceX.NET/GetQuote"
This is giving me an error ,
HTTP server code 400 reason Bad Request explanation <h1>Bad Request (Invalid Header Name)</h1>
Also, tried by adding the Colon after SOAPAction,
SOAPAction: "http://www.webserviceX.NET/GetQuote"
Same error
Final thing i guess is to make SOAPAction all small as soapaction and check if it works. Will let you know.
Regards,
Bhavesh

More information regarding 'Don't Use SOAP Envelope' in SOAP sender Adapter

Hi,
maybe this document could help you:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
It says about selecting Do Not Use SOAP Envelope.
> In this case the sender SOAP adapter requires an additional
parameter nosoap=true in the URL.
Regards
Patrick

Answered

A tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore)

a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks

Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless.

HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

See https://discussions.apple.com/message/19218571#19218571.

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

HT5312 I can not use my account to buy applications inside because I forgot the answers safety questions

I can not use my account to buy applications inside because I forgot the answers safety questions

You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(86795)

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Do not use SOAP Envelope checkbox, MainDocument set as MainAttachment after call the receiver adapter

Similar Messages

Maybe you are looking for