Do not want Budget check & Commitment value for purchase Requisition

Hi Experts,
I hope you all are doing well.
My client's requirement is that at the time of Creation of Purchase Requisition there should be no budget check against WBS element and also Commitment value should not be for Purchase Requisition.
Please suggest.
Thanks & Regards

Hi Gokul,
Thanks for ur quick reply.
I have done changes in tolerence limit (activated it for PO only).
Now i created 1 Project PR of more than value of budget (system didnt check the Budget against WBS) but when i am trying to create PO with reference to same PR, system is giving error of budget. That is OK for me.
Now my requirement is to not take PR value as commitment in my reports, i want only PO value in Commitment column of repport.
I have read all 3 notes suggested by you. Can u tell me whcih one should i implement to stop PR value as commitment in reports.
Thanks & Regards

Similar Messages

Changes in Budget checking during creation of purchase requisition

Hi Experts,
My client wants changes the current Internal Order BUget checking. Currently Budget checking happens with availability control ie. 105% Suppose current budget is 8000. It will add 5% and Purchase reqn checks the fund available with 8400 less budget utlised, but client wants 8000 less budget utilised as they want to keep 5% aside for the unforseen cases.
Cilent does not want to change the current availability setting i.e 105%, retaining that availability check, client wants to check the availability excluding tolerance. What is the solution for this.
Appriciate your immediate response.
Thanks & regards
Veda Pandit

Hi,
I think you shall set 100 % limit for purchase order and purchase requisition and 105% for good receipt.
You can do so in customizing "Define Tolerance Limits for Availability Control" , using the activity group.
Paolo

Materials available only for Purchase requisition creation

Hi Experts,
My client wants some materials available only for Purchase requisition creation and some materials donu2019t want available only for Purchase requisition creation.
How we can control
Thanks in advance,
Chandhu

1) Solve your issue first you have to bifurcate between the materials where requisition is possible & where not...u can do this by selecting some field which is not in use presently in material master-basic data view & maintain some unique value for those materials for which PR will be not possible....otherwise check whether you can bifurcate it through material groups or not...
After this take help of your ABAP person and implement BAdI::ME_PROCESS_REQ_CUST...here use the logic that after user enters the material code in PR system will check in the background what has been maintained in the said field in the basic data view of the material...if found blank then it will allow the user process further or if found any data in that field then system will stop the user from processing the same by throwing some customized error message.
2) Use the Plant-sp.matl status in purchasing view as Blocked for procment/whse for those material against which you don't want to create any PR.But this will be plant specific and both PR & PO will get blocked.
Regards,
Indranil

Default Values in Purchase Requisition

Hi MM Experts,
I want to set default values for Purchasing Organisation and delivery address for a particular user in transaction ME51N(Purchase requisition creation).
Can someone please advise me on how to do it?
I tried using the "Default Values" button, but the fields Purch Org and Delivery address are not there.
Thanks in advance.
cheers,
Randi

Hi Randi,
In ME51N, once the source of supply is assigned, the purchasing org will default to the porg defined for the vendor that is
assigned. For MRP, Purchase Organization will only be taken from the Source List. The POrg. cannot be dopted automatically due to the reasons mentioned in the Note 73241.
73241 ME51: User parameter EKO is not generated
Regards,
Purnima

Parameter validation failed. It is not possible to provide valid values for all parameters

I'm trying to test passing in parameter values from the URL. I have RS 2008 . I created an ultrasimple report based on a stored procedure output. There is no validation, No available values, No default values.
I'm trying to run the report like this:
/Reports/Pages/Report.aspx?ItemPath=%2fProduction%2fDBA+Reports%2fTest&iTest=1
I get:
Parameter validation failed. It is not possible to provide valid values for all parameters. (rsParameterError)
the one int parameter is iTestId
The RS log file says the following:
processing!ReportServer_0-54!9138!01/25/2013-09:22:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Parameter validation failed. It is not possible to provide valid values for all parameters., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Parameter validation failed. It is not possible to provide valid values for all parameters.
What am I missing?

Hi F-ram,
From your description, you want to pass multiple parameters via URL, right? To pass multiple parameters through URL, we can use an ampersand (&) to separate them. For example, I have a report with two parameters p1 and p2. The report is deployed in a
folder on the Report Server. When I navigate to the report on the Report Server, I can see the report URL is http://localhost/ReportServer_SQL2008NEW/Pages/ReportViewer.aspx?%2fFolder%2fReport&rs:Command=Render.
If I need to pass parameters through URL, I can just add &p1=value1&p2=value2 at the end of the URL and the entire URL would be http://localhost/ReportServer_SQL2008NEW/Pages/ReportViewer.aspx?%2fFolder%2fReport&rs:Command=Render&p1=value1&p2=value2
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support

I do not want a update automatic obligatory for the future firefox !!! Are we able to choose?

I do not want a update automatic obligatory for the future firefox !!! Are we able to choose? PLEASE WE WANT CHOOSE !

Hit Alt then T then O. It will open the options dialog. Select the Advanced Tab, then select the Update tab. There will be an option to not check for updates. I would however strongly encourage you to upgrade to the latest firefox. It's much safer, faster, and easier to use.

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

Sales Order form error "Not able to retrieve Display values for Service"

Hi,
Few of our orders flash the below error message when the order is queried
"Not able to retrieve Display values for Service"
Below are the points I observed
1.The orders I am referring to are imported order via EDI interface.
2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
3. The item is not a service item (service tab in Item setup is disabled)
4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
Can someone explain the significance of this column value and what could have been causing this error message?
May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
Thanks in advance,
JC
Edited by: user10174990 on Oct 25, 2012 10:58 AM

Hi,
Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
or
Apply these OSS note 150732 / 195993.
regards,
Venkatesan Anandan

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix.

I want to clear the values for the controls

Hi all,
After Adding Process, i want to clear the values for the controls in the form.
Any one help me.

If you use 2005, you can use the Formdata Event and catch the FORM_DATA_ADD event... In there you can clear the data

I want to upgrade my account to include illustrator but do not want to pay full price for both photoshop and illustrator. How can I accomplish this?

I want to upgrade my account to include illustrator but do not want to pay full price for both photoshop and illustrator. How can I accomplish this?

Photography plan is $9.99 and any added single subscription is $19.99
Cloud Plans https://creative.adobe.com/plans

Warning: Could not find the customization level value for document

Hi All,
I am trying to upload the translation for one of the page at responsibility level.
I am getting following warning when running the below command.
java oracle.jrad.tools.trans.imp.XLIFFImporter $APPL_TOP/xmci/12.0.0/fr-CA/Translated/ARIACCTDETAILSPAGE.xlf -username apps -password apps -dbconnection "$AD_APPS_JDBC_URL"
Warning: Could not find the customization level value for document "/oracle/apps/ar/irec/accountDetails/webui/customizations/responsibility/51688/ARIACCTDETAILSPAGE".
The same is working fine if the translation is for some attribute at site or function level.
Did anyone faced this kind of issue.
Thanks,
Anoop

Anoop,
I am sure you would have verified the responsibility id in the target instance is 51688(may be source instance your resp id is 51688 and in target it is different).
Have a look at this below notes, it might help.
1077267.1 - Unable To Move Resp Level OA Personalization From 1 Env To Another
848851.1 - Attempting To Upload XML File Generates Error: Could not find the customization level value for document
Thanks.
With Regards,
Kali.
OSSI.

HT4539 I WANT TO STOP MY ITUNES DOWNLOAD FOR GPS I DO NOT USE IT DO NOT WANT TO KEEP BEING CHARGE FOR IT

I WANT TO STOP MY ITUNED GPS DOWN LOAD . I DONT NOT USE IT DO NOT WANT TO KEEP BEING CHARGE FOR IT

Stop shouting. All caps indicates shouting. is considered rude, and is difficult toread.
Please try to explain what you are talking about.

I already own iWork, and do not want to have to pay for it again, How do I get the installer using my existing licence

I already own iWork, and do not want to have to pay for it again, How do I get the installer using my existing licence. It will not migrate from one computer to another, perhaps because of the recent system upgrade.

How did you pay for it?
Through the Mac App Store or as alicence for a DL?
Peter

PS - Set Commitment only for Purchase order

Hi experts,
I would like to know if its possible set in the Customizing, the Commitment just for Purchase Order.
Because, currently we have fixed Purchase Requisition and Purchase Order.
Thanks in advance.
Nacho

Hi,
SAP Note:955107 addresses this problem. You may refer the note, but for easy reference, relevant portios of the note are quoted below:
Quote begins:
Symptom
The purchase requisition commitment should not be taken into account in the availability control.
How can this be achieved?
Reason and Prerequisites
This is a customer request.
It should be possible to enter purchase requisitions with any amount and only the resulting purchase orders should be checked by an availability control.
Solution
For Releases 4.6C, 4.70, 5.00 and 6.00 first implement the corrections from Note 955106 if you have not already done this.
Afterwards proceed as follows.
1. Create a utility program ZBPFCI21 of the 'Subroutine Pool' type. For the source code of the program refer to the attached correction instruction 488705.
              Caution: Do not use a different name than ZBPFCI21.
2. Adjust the source code within the utility program ZBPFCI21 as follows:
              When the residual order plan should not be included in the assigned value of the availability control, activate the line
                       CLEAR cd_flag_pr_commitment_avac.
              (That is, delete the sign '*' in front of the line.)
3. Save and activate the ZBPFCI21 utility program.
4. Reconstruct the assigned values of the availability control (Transactions KO31 for orders or CJBN for projects).
Quote ends.
Kindly acknowledge, if it meets your requirement.
Muraleedharan.R

Do not want Budget check & Commitment value for purchase Requisition

Similar Messages

Maybe you are looking for