Do not want to create EUPEXR IDoc during F110 run

HI All
I am running F110 with RFFOEDI1 program, and after the payment program, it is generating payext IDocs as well as EUPEXR IDocs. But I do not want to create EUPEXR IDocs. I Could nt figure out what settings are driving these EUPEXR IDocs . Can any one help me out? plzz

sorry, I have nt added the message type to the partner profile.the program is still creating the EUPEXR IDocs...but those idocs are failing anyway as there is no EUPEXR Message type in the partner profile.

Similar Messages

HT4970 My reminders app will not want to create reminders for me. What could be the problem, how to fix it? Thanks in advance

My reminders app will not want to create reminders for me. What could be the problem, how to fix it? Thanks in advance

Lol idk I updated this iPhone right when I got it because it said there is a new update so I installed it as soon as possible and there is no plus sign over there. I don't know how that happened maybe its something in the setting do you think you know? And when I ask Siri to create me a new reminder and I tell her the time and everything she says are you sure you want to create this reminder I press confirm and then she says I'm sorry but the reminder you are trying to create can not be crated.

BTE 2040 is triggering during F110 run.

Hi,
2040 BTE is not triggering during F110 run. I have copied the SAMPLE*2040 FM and kept infinite loo to catch switch the debugger in background process at SM66. But the BTE is not at all triggering after I run F110.
Any other way to fix it?
all my settings @FIBF is fine and I have cheked few threads all process is fine.
Is it any configuration issue?
Regards
Kasturi

Hi Kasturi,
See SAP Note 556924 - RFFOD__V - Alternative payment advice form.
See in tcode FBZP what RFFO* report you call when you run F110 (check it in F110). The BTE is triggered by this RFFO* report, that it can be triggered by F110.
I hope this helps you
Regards
Eduardo
PD: see also SAP Note 836169 - Consulting: Payment advice notes by email or fax
Edited by: E_Hinojosa on Sep 12, 2011 6:07 PM

Creating a IDOC during outbound Delivery posting

The requirement is to create a IDOC J3ADES01 when an Outbound delivery is created.
Can you kindly suggest ways of doing this?
I planned to search for BADI or user-exit and create a IDOC within it.
But not sure.

By the way, what message type and basic type can be used for these FM?
I also found a lot of opinion from here, some say DELVRY03. some say DELVRY04, some say DELVRY05.
Is it no problem with using which basic type here as long as it fits the data that u want in the IDOC?
Please advice.
Thanks.
Best Regards,
JL

IDoc type could not be determined for the IDoc in F110

Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
Regards

If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

Do not want system to plan anything during gap period

Hi,
We have scenario where planning Gap is required for few months during the entire horizon for respective group of products.
e.g.
Say horizon is 1 year ( Jan to Dec. )
product A - > gap needed for July,Aug & Sep. ( i.e. System can plan Jan to June and Oct-Dec but it should not plan anything during July to Sep)
Product B-> gap is June,July ( i.e. System can plan Jan to May and Aug-Dec but it should not plan anything during June and July )
Note:- we can receive Sales order as per customer order but will not plan and supply during these GAP period.
We thought of using Transportation Lane validity
e,g, for product A create two Lanes with different validity date.
TLane1 :- validity from 01-01-2015 till 30-June2015
Tlane 2:- Validity from 01-10-2015 till 31-12-2015
but SNP Heuristic is not respecting this ( it seems there is some flaw , might need to check sap note)
Please suggest
Thanks
Samir

Thanks Mariano,
Can you please give more details on the calendar.
1) what about production calendar assigned in Location master.
2) Can you tell me steps to create new calendar with gap of 3 months ( for July,Aug & Sep)
Thanks
Samir

Want to create inspection lots during In-House production (shop floor)

Hello,
As per our requirement we need to inspect a material multiple times (3-4 times) during shop floor production. It means we want to check a material say after operation 30, 50, 70 and 110 (of routing). We don't want to start operation 50 unless inspection of material after operation 30 is over. We don't want to start operation 70 unless inspection of material after operation 50 is over and so on.
How can we attain this? We have assigned inspection type 03 in material master - quality management. We have assigned various MICs in concerned operations. Inspection lot is getting generated as soon as the release of production order takes place and it contains all MICs (and operations). We are able to make the result recording and defect recording for all operations at the beginning only.
Is it possible to create multiple inspection lots for these operations and is it [possible to restrict the confirmation of later operation unless inspection of previous operation is over i.e. a usage decision is already carried out for previous operation.
Puneet

hi puneet,
can u please let me know what miracle u didi to resolve this issue?
Thanks
raghav

Not able to Create Credit Memo During Return Sales Order

Hi Guru's,
Need your help in the below problem:-
While Creating Return Sales Order it give us Order No with delivery no. and then finally I am able to do VL02N where I did Post Good Return sucessfully and also check using MB51 that goods got return.
But when we try to create Credit Memo using VF01 I got the below message in log.
Error Log
             0060000799 000000 "Create billing document" not allowed (User Status LKD, object VB0060000799000000)
            LongText
            Technical data   ))))))))
I have checked all copy control including Iteam Category etc etc all are in place.
Looking for your help.
Thanks
Best Regards
Bidhan Konar

Thanks Krishna,
Thanks for the solution. Find below the steps which i follow:-
Go to Tcode VA02, Use the sale order reference and execute. From top menu bar, click on "Goto -- Header -- Status. Then again click on "Object Status" and when check I find that lock is there:- A radio button checked at -- 10 LKD Locked and change it to
--20 REL Released and SAVE. Finally working.
Thanks
BR
Bidhan
Edited by: Bidhan Konar on Jun 3, 2010 8:35 PM

Not able to create Oracle External Procedure to Run Host Commands

Trying to follow this article
http://timarcher.com/node/9
Its related to
Oracle External Procedure to Run Host Commands
steps
1)mkdir –p /u01/app/usfapp/oracle_external_procs/oracle_host
2)
Author is suggesting to create a file
but header file is missing in very first line... may be not sure..say it is <stdio.h>Create a file named oracle_host.c. The contents of this file will be:
#include
int RunCmd(char *cmd)
return(system(cmd));
4) Create the file named makefile. The contents of this file will be:
oracle_host: oracle_host.o
gcc -shared -o oracle_host.so oracle_host.o
$ cat makefile
oracle_host: oracle_host.o
gcc -shared -o oracle_host.so oracle_host.o
5)
Now run the command make
The output on my server looks like:
[u01/app/usfapp/oracle_external_procs/oracle_host]
banner@usfbannerte [TRNG] > make
gcc -shared -o oracle_host.so oracle_host.o
here I stuck .. Not able to run this step ]$ make
gcc -shared -o oracle_host.so oracle_host.o
/usr/bin/ld: oracle_host.o: relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC
oracle_host.o: could not read symbols: Bad value
collect2: ld returned 1 exit status
make: *** [oracle_host] Error 1
Any one has any idea what went wrong
Any other link related to this is most welcomed.
Please suggest ...

hi
please update
or
provide any other link / document for
Oracle External Procedure to Run Host Commands
--using c
Thanks in advance.

Want to Create a Skin Button that runs JavaScript

Hi Everyone,
I'm using RoboHelp 9.
I found a script (see below) that creates an email and automatically inserts the URL from where the user is sending the email.
I pasted the script directly into the HTML of a page to test it worked – and it does.
However, I now want to add a button to a skin that runs this javascript for each page, and have no idea where to begin to get the button to run correctly. I have been able to create a button on a skin, and can see that there are javascript options but that’s as far as it goes…
<script type="text/javascript">/*<![CDATA[*/document.write("<a href=\"mailto:[email protected]?subject=ACME%20Application%20("+document.title+")&body="+location.href+"%0A%0A"+"\">Send Feedback</a>")/*]]>*/</script>
Thanks everyone in advance.
Emma

Hi Peter,
Thanks so much for your information - it has worked perfectly!
The only thing that wasn't obvious in the snippet information was where to actually put the script text on the Action tab. At first I pasted the script into the Inline Javascript option in the bottom section. This did nothing so I pasted the script into the OnClick action option. This worked perfectly.
Is it okay to leave the script text in the OnClick option?
Thanks again.
Emma

During F110 run-How to pick profit centre from the Pur.Invoice line item ?

Could anyone please help me with a solution to this problem.
Purchase invoice line items have got profit centre recorded from Material master.
While doing the auto payment run F110, for foreign currency invoices, the exchange rate diff
is posted to a - realised exch rate diff gl a/c.
But there is no cost object attached.
Business wants the system to pick the profit centre from the purchase invoice line item
and put it in the line item record of the exch rate diff account.
Can I do it using OKB9 ? Could someone please explain how to do it.
Thanks

Hi,
With standard SAP this is not possible.may be you have to develop some custom program.
with my experiance,we always post to defualt cost center.
hope this helps you.
Thanks,
Rau

Automatic bank preference during F110 run

Hi All,
We have the following requirement from our client.
Presently when we make payment to Vendors, we need to use funds from X (or) Y banks so we will need to manually reallocate those invoices that we will pay through the non-default bank. Example, if the default bank is X; then we have to manually reallocate to Y after all funds are used up for X. These monitoring are done manually & we are talking about reallocating 20-30 invoices.
We want to know if we can configure in SAP our preferred bank as well as funds available for payment by each bank & let SAP do the allocation automatically.
Is there any configuration or enhancement apart from the normal setting (FBZP à Bank determination à Available Amounts)?
Regards
Hari

Hi,
Even though it concerns 20 or 30 invoices but there is one change to do in FBZP : is to change the rank of banks, so for the invoices the system choose the default bank (according to your rank)
please can you explain me how you reallocate invoices to the bank ?
Regards.

How to create an IDoc just with the updated data.

Hello I have a question regarding IDocs.
In case I updated an existing material.
Is there a transaction where I can put a matnr in, that reads the change pointer table and creates an IDOC with just the updated fields for an existing material.
Like the transaction BD21, for example. But there I just have the possibility to enter a message type and not a material number.
If there is no standard transaction. What steps do I have to do to achieve this goal?
Kind regards,
Tobias

thanks a lot for your fast answers. but I want to decide weather I want to create a idoc that includes all data for a material (using transaction bd10) or create an idoc that includes just the updated data.
The program logic should be the following:
Select all materials in the change pointer table (that have been changed or new created).
Check what value has been changed.
If it is value YSAPSYSTEMXX (extension of mara) then create a idoc with all data for the material.
If not YSAPSYSTEMXX has been changed create an idoc that includes just the updated data.
For Idocs that include all material data I would use sap standard transaction BD10 and batch-input.
For Idoc that should only include the changed/updated data I am searching for a corresponding transaction.
Kind regards,
Tobias

Creating custome idocs

hi all
I am XI consultant
i want to send IDOC to XI server using ALE..but the IDOC is not present ....the master data is stored in standard sap tables but for them idoc is not present ...so i want to create custom idoc and using change pointer i can send it across ...is this a write approach...? Also please give me the procedure for the above approach as i dont have idea about how to create custome idoc and send it using change pointer
thanks
Sheetal

Hi
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Reward points if useful
Regards
Anji

How to create an idoc layout file *.ido

Hello,
I'm want to create an IDOC layout file (*.ido) from a specific idoc (ORDERS05 or another).
How can i do that.
Thanks and regards

It's not the solution. I want an description of the layout of an idoc in a specific format. In this case an *.ido format. I have an conversion program (TIE portal) where i have to import it for interfacing.

Do not want to create EUPEXR IDoc during F110 run

Similar Messages

Maybe you are looking for