Do not want to set location

When I click on location in LYNC 2013 I used to get a popup asking me to set the location and at the bottom it said to see this message again click no. To turn this message off click yes. I accidentally clicked yes and now when I click location it always
pops up the location and I can enter it. I want the popup back so I can click no and it doesn't force me to fill out the location form. I have searched the registry for it but cannot find it. Anyone know how to get this message back short of reinstalling?

Hi,
You can also try the Set-Lync2013ClientWarnings.ps1 in the link below to add the popup back again:
https://gallery.technet.microsoft.com/Set-Lync2013ClientWarningsp-0f8d026e
With the help of this, you can also add other popups as well.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

I have windows 8 new computor have kaspersky internet security oncomputor tried to download firefox a security system came up for firefox i do not want the set

can you help in downloadinfg firefox without the security system

Firefox from [http://www.mozilla.org/en-US/firefox/all/ mozilla.org] is not bundled with anything in installer or browser.
Since you mentioned kaspersky, perhaps it was something installed by the kaspersky application.

I dont want to set my iphone up as a new phone, but i dont want to restore from my previous phone. help!

I bought a new iPhone 5 a few months ago, and havnet plugged it into my itunes until now, and I do not want to set it up as a new phone, because it will get rid of everything I already have on there, but I also dont want to restore from my last backup with my old iPhone 4. I want to add music that i have on my itunes, but i dont want to start over fresh. PLEASE HELP!!!!!

Those are your only choices.
You should simply transfer everything from your iphone to your computer. Then you can sync it back.

IPhone 5 keeps asking for voicemail password, I do not want to give it

5-10 times per day, and usually while I'm driving and have GPS up on the screen, my iPhone 5 / iOS 7 will pop up and ask for a voicemail password.
I do not use voicemail. I do not want to set up voicemail. I do not want to have voicemail. I do not want to have a voicemail password. And even if I had a voicemail password I do not want my phone to have this password.
How can I stop iPhone from continually asking for this piece of information which is obvious that I will not give?

Voicemail is a function of the cellular account that you have with your cellular provider. Contact your cellular provider to have voicemail turned off.

I want to set the alarm for weekdays/weekend

I want to set the alarm for weekdays/weekend how I can do that on my iphone 3Gs, I Google as well but unable to find and way to do this. I do not want to set the alarm every day. It really very hard that I set it every time.
If any know any other application that I can have for alarm. iphone built-in alarm system is carp.

Yes, but he doesn't say why it is, unsuitable, for his needs. From what he says, it is perfect for his needs - you can set it for just one day, or any subset of weekdays, you can set it once, or repeat any number of times, or indefinately, it does not have to be the active app to work, and it is free and already included on the iPhone.
Simply set a weekday alarm, set it to repeat M/T/W/T/F, set a weekend alarm to repeat every S/S, and that's it - unless I'm completely misreading the first part of the post.
Given what was posted as desired for the app's function, simple saying the built in clock's alarm is "carp" really doesn't add anything, since by all accounts it does actually do everything that the first part of the post wants.
Unless he wants an alarm function that automagically somehow knows which days to chime and which days to not?

I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this?

I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this? I cannot find anything in the user manual.

The TC is very hard to just move.. it retains too much of the old network setup.. buried deep in the bowels of the firmware configuration files.. or even on the hard disk special partitions used by the TC.. invisible to you btw.. !!
Do a factory reset and setup from scratch.
That factory reset will have no affect on your backups.. even if you rename the TC.. not a bad things since you also want clients to respond to the new network.. simply reset TM to the new TC name and location.
See A4 here.
http://pondini.org/TM/Troubleshooting.html
Factory reset.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

Restoring from backup to new location + not wanting files renamed

Hi there - I am a newbie to this forum.
I have a Win XP machine that recently needed to have the hard drive wiped and the OS re-installed. Fortunately I had a recent backup of all my data so I'm in a good starting position for a restore. However I have some questions as the re-install of the OS has had a change in profile name.
Before my machine was wiped, I had a "Daniel" profile and so my "iTunes Media folder location" was set to C:\Documents and Settings\Daniel\My Documents\My Music.
After my PC was rebuilt, a new profile was created called "dnl". iTunes has been re-installed (version 10.1.2.17). The first time I launched iTunes the "iTunes Media folder location" was set to C:\Documents and Settings\dnl\My Documents\My Music. I did NOT choose to have iTunes browse/load my files and so currently iTunes shows no files or playlists.
I have recreated the C:\Documents and Settings\Daniel\My Documents\My Music folder from my backup so all the music files and the previous libraries are presently in this location. However even if I change the "iTunes Media folder location" within iTunes to point to the "old" location, it doesn’t find the files or libraries.
I have tried deleting the following files from C:\Documents and Settings\dnl\My Documents\My Music\iTunes:
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.itl
iTunes Music Library.xml
I did this assuming that the next time iTunes was launched, it would refer to the old location (as specified as my "iTunes Media folder location"), find the old library files there and use them. However it seems to ignore them and simply re-creates the files above in the location I deleted them from.
So…I am unclear as to the best strategy to have iTunes point back to the old location to find the music files and retain all the playlists I had.
I found this thread: http://support.apple.com/kb/ht1364. It mentions a method that will find all the files in the old location and move them to the new location, retaining playlists, artwork etc. Once the data has been copied, it advises to delete the files from the original location.
However I see that it mentions checking the ‘Keep iTunes Media folder organized’ option. From reading other threads I know this to be a source of one very irritating problem – it renames all the file names. I have specifically ripped my music using software other than iTunes for the express purpose of being able to tag the filenames with more specific info than iTunes would. I like the files to named <artist>-<album>-<track no>-<track title>.<file extension> and am not a fan of the very basic filenames that iTunes assigns.
So…I want to have iTunes simply point back to the old location and not do any file renaming. I am happy enough to have iTunes simply point to a location that isn’t technically part of my current profile. I don’t have a desperate need for the files to be moved to the dnl profile.
So…I am guessing there has to be some other file (or registry setting?) that knows where best to point to? Can this modified?
I would be appreciative of any assistance.
Thanks!

Hi Daniel, welcome to Apple Discussions.
The default location for the iTunes library folder is <Profile><Music>iTunes with the media folder at *<Profile>\<Music>\iTunes\iTunes Media*. For XP the <Music> folder is My Documents\My Music.
When iTunes starts up it looks for a set of library files in the last location it used. If that location is also the default location and it can't find the library files it assumes it has just been installed and creates a new set.
Changing the location of the *iTunes Media* folder in preferences does not change which set of library files it opens, nor will it automatically detect all the media in that location.
Ideally you should restore the folder iTunes and all its subfolders from your backup into *C:\Documents and Settings\dnl\My Documents\My Music* and start iTunes. All should work perfectly and, as far as iTunes is concerned, you will be using the same library as you used to. Any iDevices should sync without problems.
If you media was not is the usual locations or you are unable to restore the entire iTunes folder then things become more complicated. Post back if you still have trouble and I will try to go into more detail.
tt2

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. be

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. because of a slow connection

If you are getting emails from these forums then you probably accidentally clicked on one of the links on the forums page where all the questions are listed e.g. at the top right of each forum's page there is text box with Actions and Notifications in :
So far you've posted in the iTunes Store forum :
https://discussions.apple.com/community/itunes/itunes_store#/
And the Using iPad forum :
https://discussions.apple.com/community/ipad/using_ipad#/
If on either of those forums that box says 'stop email notifications' instead of 'receive' then click on it and it should stop that forum sending emails to you.
There are full instructions on this page for stopping emails, as there are other places where they might have been set 'on' : https://discussions.apple.com/docs/DOC-3661
This is your original post for iTunes Match : https://discussions.apple.com/message/22647293#22647293
And this page lists your posts (you can click on each post on it to be taken to it's thread) : https://discussions.apple.com/people/suzettemg?view=overview

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

Boot camp does not give me the option to make a partition, instead it just gives me the options to download windows support software, install windows 7, etc. I do not want any of these, I want to set aside the space on my hard drive!

Hello, I wish to install Linux Ubuntu on my macbook pro by using boot camp to set aside space. Whenever I load the Boot Camp Assistant application out of the utilities folder in applications, it only gives me the options to download windows support software and install windows 7. I do not want this, I just want to be able to slide that little bar to set aside the space on my hard drive that i can use for Linux. I tried just downloading the windows support software but my internet is immensely slow and it has been an hour or so since it started and it's not even half way done. When this download is finished will i get the option to partition or will i just be faced with those same options?
I am on a 13" macbook pro, with apple OS X snow leopard version 10.7.2
A lot of the data on this macbook was transferred over from my old macbook i had.
Any ideas on how to fix this problem?
Thank you for reading.

Well thank you for your honesty. Apple requires you have to have a Mac to develop iPhone apps, ergo my foray into OS-Xland. No way around it that one except for running OSX in a VM, which would have probably saved me some quid, true enough.
BUT for those interested parties: VirtualBox has a startup script in /Library/StartupItems/VirtualBox that will prevent OSX from fully booting on the initial (and required) rEFIt boot cycle. Once I temporarily moved that out of the StartupItems rEFIt went in as expected.
FYI, the openSUSE desktop running native is a little peppier than OSX native which was a nice surprise. Now if the Mac just had more open source software we would have a deal. (:

I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

I actually need help but cannot find the answer.
Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
Thank you.
''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

My itunes library is stored on an external hard drive. How do I set it up to be able to use with my work macbook pro? I do not want it stored on my laptop.

How do I store my itunes library on an external hard drive and access it on my macbook pro? I do not want to store my library on my macbook because it is a work computer and do not want to take up storage space there. I know it can be done because I had it that one on a previous laptop but I cannot remember how I did it and would really appreciate a quick step by step process. I do not mind if it seems elementary. I am admitting my lack of knowledge and would really appreciate basic instructions. Thank you for anything anyone can do to help.

iTunes>Preferences (Cmd+,)>Advanced
Choose the Ext HD (and the appropriate folder) as the location for your library.

HT4946 i am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure

I am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure that i

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

I want to set up my videos on my iPad mini by artists, not songs. can someone help me?

i want to set up my videos on my iPad mini by artists, not songs. can someone help me?

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the side, back, or bottom of your computer. Please do not include your serial number.
Also provide the model number of your Bose speakers for our review. If your computer is running Windows 8, you can access to Windows Control Panel by typing "control panel" while on the "Modern" desktop. All of the system settings and information will be available there.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I want to set up my spreadsheet to display 2 digits to the right of the decimal, even if zeros, and not have to do it to each individual cell.

I want to set up my spreadsheet to display two digits to the right of the decimal point, even if zeros, and not have to do it for each individual cell.

Select all the cells you want formatted that way (or the entire table if that's what you want)
Open the cell inspector
Set the format to "number" with 2 decimal places

Do not want to set location

Similar Messages

Maybe you are looking for