Do rz20 and rz21 tcodes belong to bi ?
Hi Gurus
do rz20 and rz21 tcodes belong to bi ? or they are the tcodes for BASIS. Actually I am a BI consultant and I wanted to have authorization of these tcodes. I got the answer from BASIS team that these tcodes belong to BASIS not to BI. Pl guide me
Thanks
Shivani
hi,
T-code RZ20 and RZ21 belongs to CCMS.
1) The CCMS Alert Monitor (transaction RZ20) : is the expert monitor currently available for administrators. It provides a customizable, system-wide overview of the system landscape. From RZ20, you have a guided connection to remote systems in case of an alert.
The CCMS Alert Monitor has the following advantages:
u2022 Automated, central monitoring that only requires you to carry out administration tasks when an alert occurs
u2022 Proactive monitoring by means of alerts that are triggered as soon as a particular threshold value is not reached, or is exceeded
u2022 Support when solving problems by means of pre-defined analysis functions with which you can resolve the cause of an alert in a particular component
The CCMS Alert Monitor offers the following functions:
Displays any error alerts occurring in the TMS or when exporting requests; it organizes the alerts by topic in a tree structure.
Analysis method for each alert
Option of setting alerts to completed
Alerts are visible as long as they have not been completed (completed alerts are visible in the history).
The CCMS Alert Monitor includes all systems in the current system landscape.
2) Creating the CSMREG User:
start transaction RZ21 and choose Technical Infrastructure -> Configure Central System -> Create CSMREG User.
Let me know if you need more information.
Regards,
Shiva.
Edited by: Shivu Kumar on Sep 14, 2009 7:50 AM
Edited by: Shivu Kumar on Sep 14, 2009 7:50 AM
Edited by: Shivu Kumar on Sep 14, 2009 7:51 AM
Edited by: Shivu Kumar on Sep 14, 2009 7:52 AM
Similar Messages
-
How to configure rz20 and dswp in solution manager ?
Hi all,
I have configured the ccms agent and ccms ping in the satellite system and all the connectivity with solution manager.
but then i haven' got the idea how to configure the template in the RZ20 and DSWP ?
Please advise on document / blog etc regarding this kind of configuration ?
Thank you and Best Regards
FernandHi
check below link:
DSWP: http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/content.htm
RZ20: http://help.sap.com/saphelp_nw04/Helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
Thanks
Sunny -
System monitoring - DSWP and RZ21
Hi all,
I am using sap solution managers workcenter "System monitoring" to set up the sap monitornig for a huge landscape. This works well, but to receive alerts (e.g. per mail) I additionaly have to do the settings in RZ21 (assign central autoreactions). This is not very comfortable because each setting has to be done twice (in dwsp and rz21) and there is also the risk to forget something. Do you know any other possibility? Do you know about plans to integrate the functions of RZ21 into DSWP?
Thanks
MichaelHI
We are setting up system monitoring is solman? i do have the same doubt as mentioned earlier
>
Karthik Bhirraju wrote:
> Please let me know whats the diffrence in configuring CCMS alerts in RZ21 (CEN- SOL) and configuring CCMS in(CEN- SOL) Solution Manager -> DSWP -> Solution Monitoring ?? is Solman-> Solution Monitoring a shortcu way or a WIZARD way to RZ21 (creating CCMSUSR, CCMSREG .. etc what ever we do in RZ21) or we need to configure RZ21 as prerequisite to configure solution monitorind in DSWP
can anyone guide me here? and what would this affect the RCA setup
jansi -
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
Hi,
We are planning upgrade from 4.6C to ECC6.0 .Is there a table in SAP which contains old and new transaction codes? or is there any easy way to find obselete transaction codes and new Tcodes.
I also want to know the new tables added and replaced tables .Any
help is appreciated.
thanks
Venkateswara Rao YeleswaramHi
Try this link, which will give functionality enchancements between different versions of SAP.
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Ramakrishna -
We have only GL SAP document number. how to find Vendor clearing document by these GL Document number please suggest and suggest Tcode.
Hi Mahesh,
To display a document, proceed as follows:
Tcode : FBL1N (Vendor Line Item Display)
1-Select option's.
2- List
Regard's.
Cem Ates -
Wher's the error? BPPF-BLART IN TD_PROTOCOLLO AND SYST-TCODE NOT IN Z_ECCEZ
Hi All,
cuold anyone tell me wher's the error in this code I've used in validation rules of FI?
BPPF-BLART IN TD_PROTOCOLLO AND SYST-TCODE NOT IN Z_ECCEZIONE
ThanksHi All,
cuold anyone tell me wher's the error in this code I've used in validation rules of FI?
BPPF-BLART IN TD_PROTOCOLLO AND SYST-TCODE NOT IN Z_ECCEZIONE
Thanks -
Mismatch between the MD04 and VL10 tcodes.
Hello Gurus,
There is a Mismatch between the MD04 and VL10 tcodes. We can see an entry in the VL10 transaction which we couldn't find in the MD04. Please note that there is no dschedule line for that date in the LU aggrement. Kindly advice.can be an error in in the delivery index.
run SDRQCR21 report?
And see if the record appears in MD04 or vanishes from VL10 -
Exact process flow for Material management (MM) and UI Tcodes.
Hi Gurus,
Could any one tel me Exact process flow for Material management (MM) and UI Tcodes.
ALL BAPIs for MM module.
Thanks in Advance.hi,
Check the threads:
MM flow
MM-Process
For tcodes:
TCODES IN MM
TCODES IN MM
Hope it helps..
Regards
Priyanka.P -
Where XML and related file belong when send from FCP to Color?
Hi(Bonjour)!
Where XML and related file belong when send from FCP to Color?
I want to start a fresh project and delete all previous tests.
Michel BoissonneaultHi(Bonjour)!
I messed up with preference for home directory.
Thank you.
Michel Boissonneault -
Diff between MIGO and MB01 tcode.
Dear all
Whats is the difference between cancelling GR from MIGO tcode and MB01 tcode.
Actually I got problem when GR was cancelled by using tcode MB01 (movt. type- 102). After that when i tried to cancel the part2 excise (tcode- J1IEX) i got the message "No Part I exists for availing credit in excise invoice 68150 2009". But I created the same scenario and cancelled the GR using migo then there was no problem. Still I couldn know the difference.......
With regards
Pardeep SharmaDear Pradeep ,
MIGO is the single T code that gives the facility to carryout various inventory management transactions .
Each an every transaction carried out in MIGO also has a separate TCODE.
In your case as per the sys the material document should be cancelled .
While doing it through MIGO u have selected the right options & cancelled the material document .
But in MB01 u have not cacelled but carried out a ggods receipt in reverse direction . If not
using MIGO , u should have used MBST instead of MB01 .
Pls try with MBST and it would work fine.
Hope it is helpful .
Regards
Anis -
I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?
garysm99 wrote:
Not familiar with structure view. How do I go there?
click in IDVD on this button -
Difference between rsrt and rsrt1 tcodes
Hi,
What is the difference between rsrt and rsrt1 tcode as both are used to run queries.Hai its just about the query display difference in RSRT we can get to set list,analyzer,HTML on generalised one. where as in RSRT1 we use the views which we have created for the query already .
Also we can define different parameters in rsrt .in RSRT1 its just a single view with not much option.
other things are mostly same..
Goodday. -
Hi,
Is their any flow in PS module and what is the use of this tcodes ( cj40and 41). Can any one explain about the Tcodes : CJ40 and CJ41..CJ40 is for Cost Planning at WBS element. This method is used when Network Costing is not used. In CJ40 u can do Overall planning or Annual Planning. Also Cost planning can be done in different version to capture differrnt plans.
CJ41 is to display cost planning done CJ40.
Refer below links.........Topic:Manual Cost Planning in the Work Breakdown
http://help.sap.com/saphelp_erp60_sp/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm -
CJ88 and CJ8G tcodes - Settlement issue
Dear Experts,
We are having an issue in the settlement process. We ran the actual mass settlement for all the projects for the specific RA keys. I do see the cost has been posted and transferred and they are settled as expected. Accounting looks good as well. However, if I ran the settlement individually on tcode CJ88 that has been already settled in the mass settling process, it shows up on the list "to be settled" in the test mode. If I re-run it again in "Actual" mode, it settles without any issues and then it disappears from the list finally. Did anyone experience this issue before? I will post the example screenshots of the examples that I am analyzing.
thanks,
DKHi D K,
This doesn't seems to be a way it has to work, is there any support packs recently added, this can be a bug.
If you are able to replicate the issue always, do raise it with SAP, they will be able to provide a resolution or conclusion.
If you check with Orders, system will check for Networks or Work Orders assigned to the WBS element and the same should be settled, may be there is some cost pending from Order end. Check the order or network assignment.
Regards
Terence -
Link between knvp and the data belonging to a pernr
Hello
In table knvp there are link between customer and partners. These partners can be companies but also persons.
Thje personnujmber is filled in case.of a person.
Does anyone knows the links or the tables belonging to that pernr ( like the adddres, email etc.).
i do not want the functions.
thanx in advanceHi,
Master data of personnel number are stored under infotype tables (table PAxxxx).
e.g. the address is stored in infotype 0006 (PA0006), while email is usually stored in infotype 0105 (PA0105)...
The key fields of those infotypes tables are mainly the personnel number, along with the validity dates and a subtype field if needed (e.g. the standard subtype for email in PA0105 is '0010')...
fyi, You can display/maintain all PA infotypes through transaction PA20/30...
Kr,
Manu.
Maybe you are looking for
-
Continued..my security answers have been changed, I think ID hacked, email and sec answers changed. How do I delete it? By the way it is not this ID, I had to set up a new one to use this site....
-
"The operation could not be completed" error when starting VS 2013 (premium)
It was running fine and then msbuild wouldn't stop so I had to kill VS. After that I get the above error every time I try to start VS. Same result with the various console invocation devenv options (/safemode, /resetuser, ...) My path is < 2048 chars
-
How to populate the Commercial Invoice fields?
Hi, We are trying to use the native PDF form '/SAPSLL/PF_US_COM_IN' for printing the commercial invoice in GTS. We are able to process the message on the Customs Decl.Doc and do the print preview of the comercial invoice, but the following three fiel
-
I had my iPod nano hooked up to a Dell laptop with iTunes. Of course the laptop went dead and now I don't know how to get the music from the nano to my iPad? Anyone have any ideas or instructions to assist?
-
'Service of Objects' for attachments
Hi All, I am working on custom screens with module -pools in which i have a requirement to have attachments much similar to VA01. I searched about 'Services Of Objects' in SDN and did find some helpful posts but i am not able to understand where to s