Do SDHC cards work with the lightning card reader?

I can't get our lightning adaptor to work to tnr video to the iPad air

If the Gift Card has a Visa, MasterCard or Amex logo and is from one of the participating issuers, it may work using the contactless reader.
Apple Pay participating issuers - Apple Support

Similar Messages

  • Will an onboard garaphic card work with the lates version of photoshop or do I have to have a dedicated graphic card

    Will an onboard graphic card work with the lates version of photoshop or do I have to have a dedicated garphic card

    Most likely you should be fine.  Some of the early i7s might not support it (did the first i7 core have integrated GPU?), but any of the last couple are fine.  The nice thing is, that you can always add an aftermarket GPU if you need to, so give it a shot.
    I have a Haswell i7 (4770k) in my desktop PC, and it's more than enough.  I did a lot of research when I built my PC and my conclusion at the time was that a GPU doesn't offer a sizable performance boost unless you buy a really nice GPU ($400+).  The integrated GPU can run all the functions of CS6.
    My laptop is an older i5.  Not sure which, but I think Sandy Bridge.  I can notice the difference in process times between the integrated GPU and discrete (AMD).  But only on certain heavy filters and when working with big composites (~2 gb files).  But that's an i5 and and older one.  That said, the integrated GPU is far more stable, so I usually just put up the lag instead of having the AMD GPU crash my computer.

  • GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?

    GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?

    Only the wireless carrier that the iPhone is locked to is capable of unlocking it.  You'll have to ask them if they will unlock it.  Some will, some won't.
    Hope this helps

  • Would this storage card work in the Media Card slot of my W700?

    Hi,
    I'm interested in buying this Lexar 133x SDHC Card:
    http://lexarmedia.com/products/lexar-professional-133x-sdhc-card?category=213
    Basicallyl, I want to use it as another storage drive (as opposed to putting in my camera or other device).  So after I insert it, I want to be able to format it and use it as another storage area.  Would this card work?
    The reason I'm gravitating to that card is that is that I see in the specs that is minimum 20MB/sec read transfer rate and it does not take up one of my USB slots.
    However, even if it does work, would I be better off with their Echo ZX plug-and-forget it USB drive when they ship it?:
    http://lexarmedia.com/products/lexar-echo-zx-backup-drive-0?category=90
    If both work, which would be faster as a storage drive?
    Thanks.

    It is a SDHC card so it should work on the card reader of the W700.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Will a YubiKey work with the Lightning to USB adapter?

    According to Yubico the YubiKey works with the old Camera Connection Kit but no word on the new Lightning to USB adapter.

    The adapters have no logic, it's the iPad that determines compatibility with devices. It it works, it works with one exception. Sometimes high-power draw devices must be connected to a powered hub to work.
    Single adapter for 1$10 more: http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit?fno de=3a

  • Which Express34 Cards work with the latest Yosemite?

    I'm running OS X 10.10.1 on a MBP 17" which I just bought 2nd hand - it all seems fine EXCEPT the Thunderbolt port doesn't seem to work - "No Hardware Found".
    It is a Mid 2010 machine.
    I suppose I will have to go to the apple store to fix the Thunderbolt issue (unless anyone has ideas?) but in the meantime I would like to buy an Express34 Card with a USB3 port for me to use as a stopgap. Easier said than done it seems. I've read lots of comments that generic cards don't work etc.
    Can somebody tell me which product will work under this setup? Does it have to be a 'mac branded' one? If so, which?
    Thanks very much!
    Phil

    First be advised that a 2010 MBP has only a minidisplay port.  It is not a Thunderbolt connection.
    I have an OWC and a Sonnet Express34 cards in my 17" MBPs.  Both work with no problems.  I use it for eSata connections to my external HDDs.  Do not expect to get USB3 transmit speeds via the card.
    Ciao.

  • What AGP video cards work with the MEGA PC

    Hi,
    I am a newbie to this forum and a new owner of a Mega PC651.  I will be configuing it with the following:
    512 MB DDR 2100 RAM
    Celeron 2.4Ghz CPU
    Digital Research Technologies DVD+-RW/+-R
    I want to play 3D games like C&C Generals with the system but am afraid that the SIS651 will not support them.  
    I have a ATI 9700 All-in-wonder Card in my son's computer but am concerned about heat generation in the Mega PC after reading several reviews. Also, I think that he will be very angry if I steal his card.
    Can anyone recommend a moderately priced Video card MSI or other that will fit and will not cause any heating problems?
    Thanks,
    Charlie G

    Windows XP supports up to AGP 8x.
    I have a 9600 pro at the moment. I don't think that VGA silencer will work - if it takes up the PCI slot, then there will be nowhere for the cooler to draw air from because it will be pressed up against the case.
    I am currently running my 9600 pro without any additional cooling and it seems to be doing ok. I did have a unit somewhat like this:
    http://www.frozencpu.com/cgi-bin/frozencpu/slf-01.html
    It definately helped the cooling but the noise began to get to me. I recently sorted out my CPU cooling problems and so the main source of noise was my system exhaust above. I have taken it out and have been playing several high graphics games with no problems yet.
    As for only supporting up to 4x, the 9600 pro will not be dragged back much. When it gets to the point that games require more than 4x speed to pass full detail for a decent framerate, the 9600 pro will start to struggle anyway. You will have a slight performance decrease, but nothing that will turn a game from being playable to un-playable. I would have bought a better card but the 4x speed would limit the cards actual power so there wouldn't have been any point.

  • Does any sd card work with the lighning to sd card reader and is it compatible with the iPod touch 5

    Does anyone know if its compatible???????

    Jo,
    Since you mentioned 500MHz, I imagine you have the Powerbook (FireWire) M7572 "Pismo". If so, it can use an original AirPort card installed under the keyboard; this is the only card that will work. You can see a PDF here:
    http://docs.info.apple.com/article.html?artnum=50028
    This card is the slower 802.11b (11Mbps) and is supported by Apple's AirPort software in both 9.x and 10.x. However, since the card is no longer made, vendors are charging $100 and higher for used cards.
    You can also add a third-party WiFi PC card to the PCMCIA/CardBus slot on the left side of your Pismo. The card below is fully supported by Apple's AirPort software in 10.2.8 and newer but will not work under 9.x. It is also the faster 802.11g 54Mbps speed.
    Here is the Buffalo WLI-CB-AG54 AirStation 802.11 b/g/a 54MBps Wireless PC-Card:
    http://eshop.macsales.com/shop/wireless/

  • Where are the scripts that make Flex apps work with the JAWS screen reader?

    From the adobe website:
    To use the JAWS screen reader with a Flex application, users must download scripts from the Adobe accessibility website before invoking a Flex application. Screen readers work best when in Forms mode, which lets users interact directly with the Flex application. These scripts let users switch between Virtual Cursor mode and Forms mode by using the Enter key from almost anywhere within a Flex application. If necessary, users can exit Forms mode by using the standard JAWS keystrokes.
    Users can download these scripts, and the installation instructions, from the Adobe website at www.adobe.com/go/flex_accessibility."
    The link is broken and the marvellously dense chat support person said that Adobe doesn't support Flash Builder.
    Where are these scripts located?

    user8757041 wrote:
    I successfully installed oracle 11gR1 but the network configuration is not complete. can I still connect to the database server from XP? How? I am new in connection, even different OS. I use putty and I can access the command line as root or other users.(after I edit IP address at Network Configuration)
    I installed OEL 5.3 not on virtual drive, but directly to my desktop computer.
    what is connection database software?? is it different from putty?
    where can I get the DMS? ( data mover scripts, am I right?)
    wait for your response..
    regard.I'm afraid, I don't follow you very well. Anyway, if you have a db, with a running listener, you should be able to connect from any client over your local network (even through different OS). In that case, you'll need a client software (i.e. Oracle client runtime installation). Regarding the DMS, you should be able to find it onto the client after Peopletools/Peoplesoft application installation.
    Nicolas.

  • Will Wireless WRT54G3G Work with USB Broadband card?

    Hi, I bought the WRT54G3G Router... When it arrived I realized it was made to take a plug in Broadband card with the small connectors. I have a USB broadband card. Does anyone know if it will still work via another method, ie: via a lan line, or if there is an adapter for the wireless plugin that would convert it so it could be used with a USB port? Any help would be greatly appreciated... Thank you... Jo
    Message Edited by WhimzicalArtist on 07-16-2007 11:27 AM

    i don't think it would work with the USB card... it is made only for the PCMCIA cards...

  • GoPod - Does it work with the latest Ipod firmware?

    I have a 5th Gen 60gb iPod and have used goPod in the past to remove the volume cap. But ever since updating my iPod with the latest firmware the volume limit seems to be very quiet compared to what it used to be. Is this because goPod 1.4 doesn't work with the latest firmwire?
    Has anyone else had this problem or is it just me going deaf?
    Cheers

    I disagree with that rudolfraith.
    When I plug my iPod in, launch goPod and then press uncap, it does say that it is now uncapped, but the volume limit is no difference at all. I even tested this by hooking my Ipod up to my PC and recording it capped and uncapped, the levels were exactly the same.
    So I feel that goPod v1.4 doesn't work with the latest firmware.

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • I have an iPod G2 with a firewire 400 lead. how can I attach it to my new 13 inch Mac book Pro, is there a 400 to 800 firewire converter. USB lead wont work with the Macbook Pro. iPod used as an external drive to archive memory cards on the go.

    My G2 iPod that I use as an external drive to archive memory cards on the go cannot link with my new 13" Macbook Pro cause it uses a firewire 400 lead. It will not work with a USB lead. Is there a firewire 800 ipod lead or converter available? Can any one shed some light on this please?

    As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
    If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

  • Hi, i am going to buy and iPhone 5 in france but it says its an unlocked iphone so i guess ir i take it to Ecuador (my country) the iPhone is gonna work with a sim card form Ecuador right¿

    Hi, i am going to buy and iPhone 5 in france but it says its an unlocked iphone so i guess if i take it to Ecuador (my country) the iPhone is gonna work with a sim card from Ecuador right¿

    If the receipt says "unlocked" (and not "SIM free") then it will work anywhere in the world that there is a GSM network. However, if it ever needs repair you will have to take it back to France.

  • I have a MDD dual 1.25ghz processors and I would like to know which sata drives will work with the Sonnet Seria ATA pci card?

    Which sata drives will work with the Sonnet Tempo Serial ATA card?

    Pretty much any of the SATA 3.0 Gbps drives.
    Western Digital Black and Blue and Hitachi 7K drives are all good choices.
    If you try a SATA 6.0 Gbps drive, it will need to be jumped to limit to SATA 3.0 Gbps.

Maybe you are looking for