Do text frames have an (internal) "number / creation date"?

Assumption:
I suspect, that (automatic list + paragraph) numbering depends on when a text frame was created.
Situation:
I have made a paragraph text style with paragraph numbering and list numbering. Works fine, so far: I can even create multiple text frames (the three green ones in the below picture) that are not connected with / chained to each other and the numbering still is correct.
Problem:
But when I create a new text frame (with the color pink in the picture) later on, which shall be inserted as e.g. second in order, the numbering still orientates at the frame creation. Correct would be: the pink paragraph "5. new frame" should be numbered as "3.new frame", the green paragraph "3. drei" should then be numbered as "4. drei" and so forth.
Question:
How can I change the frame creation number? Can it be changed at all?

Thank you, jmlevy, this works!
But when dealing with an object with many pages, this can be tedious, though. So, is there another way? Is there a way to change the text frame order by e.g. entering a new value for its number somewhere within InDesign?

Similar Messages

Internal number creation in IDOC

hi friends,
if i use idoc/bapi for material upload.will that create material number internally.is it possible
thanks in advance
regards
raj

Hi Raj!
You can't use internal number assignment directly. Either you fill your numbers in the input file or you can use a separate function module to use SAPs internal number assignment. Use BAPI_MATERIAL_GETINTNUMBERRET for Retail materials (MM41) or BAPI_MATERIAL_GETINTNUMBER for standard materials (MM01).
Regards,
Christian

VZW to VZW text messages have call back number in every message after Tango update

First of all I want to say how much I appreciate VZW rolling out the WP updates in a timely manner for once (is this the first time they've ever done so, for any phone?), even with the outdated technology (or just the one device), and I'm sure it'll keep us WP faithfulls happy for a little while longer. However I do have an issue with the latest update because it seems like VZW has been affected in such a way that now I have a "Call back at xxx-xxx-xxxx" after every text message received from a Verizon customer. At first I thought it was my friends and family telling me to call them back, and I did (to some degree of annoyance caused me and others) and now its just a plain nuisance. Some web perusing resulted in a few others having the same issue and only on verizon so far
I know who's texting me at any given time because their names are displayed on top and if I want to call them all I have to do is tap the name (and if no name then the number is so displayed), so displaying "call back at" so and so is just unnecessary and only serves to clutter up an otherwise clean nested message history/interface. So my question is there a way to disable this (which I have yet to find) or does VZW know about this error and plan to fix it, hopefully very soon? Or is this an issue with microsoft?

I found the answer to this problem. I think it depends on what kind of phone you have, but I was able to turn off the CB# in the messages. I have a Samsung Stratosphere. I was able to go into Messaging, then the menu icon, then choose Settings. Under the settings there was a choice called Callback enabled. I was able to to uncheck this choice and now my callback number no longer shows up. Hope this helps everyone!

Lining up text in linking text frames

I've inherited a document design from an agency that my client sometimes uses - the client can't get their hands on the original files so I've recreated from a PDF. I can't replicate how they make text line up across a page through linking text frames.
The majority of their text frames have VertJustification set to Bottom, so I'm setting that as Default for my text frames. But when I put dummy text in to my frames, I get very bad alignment of lines - especially at the top - when there is a different number of paras in each frame.
Design agency PDF http://dl.dropbox.com/u/4460087/designagencytext.png
My InDesign setup http://dl.dropbox.com/u/4460087/mytextsetup.png
Current text
9pt text
14pt leading
2mm (5.9pt) space after each para
Given their text set up - especially the 2mm space after each para - they must be doing some adjustment and balancing after the text is added. I'm just not sure how.
Any clues??

Assumption simply based on the fact that they seem to line up more often at the bottom through 80 pages of this stuff rather than at the top.
But I think you've hit the nail on the head for me. Setting my frames VertJust to 'Justify' helps me do replicate their style quite easily.
And agreed, I also think the visual distraction of lines not lining up across columns is worse than having columns line up at the bottom.
Thanks for the help.

Defining Internal Number Ranges

Hi,
I am looking for a good solution for internal number ranges generation in MDM, I haven't find any solution for this number ranges in any of SAP MDM ref. guides and any other SAP standard documentation.
Business requirement:
1)Based on Account Group we have different internal number ranges for Business Partner.
2)Once the user select a Acct. Grp for Business Partner in MDM corresponding sequential number range should generate and assign to that BP.
3) the solution should work in both Data manager and in Portal.
Appreciate all valid suggestions and helpful answers.
Thanks,
Pooja Varma

Hi Anita,
I am not looking for Remote System key generation.
I need a solution for the internal number range generation for any new BP or Material creation within MDM and there is no data model provided by standard SAP MDM on this.
- I am wondering how all other clients are implementing this kind of requirement?
- this is very crucial and important for any client in the BP.
Hi All,
Kindly share some of your experiences and provide solution in this regard.
Highly appreciated all helpful answers and suggestions.
-Full Points will be given all valid answers.
Regards, Pooja

Can't See Text or Select Text Frame

I'm formatting a book in InDesign. On one of my two-page spreads, the text and its text frames have disappeared. I can see and select these objects in the Layers panel, so I can verify that the text frames are still there and are positioned correctly on the pages... but on the spread itself, I'm unable to see the text or click the frames to select anything. The rest of the pages in the book look fine...

This is after having right-clicked on those objects in the layers panel and choosing "Select Item(s)" ... if I were to go over now and click inside one of the text frames in the spread, it would disappear, leaving me with only the pink-purple page margin lines directly beneath the text frame's borders.

KKE1 Internal number assignment

Hi All,
is there anyone that have already assigned an internal numerator at base planning object?
Many thanks

It is not possible to have an internal number range for base planning object.

Serial Number Creation Time

Hi,
In Which table and what field is the serial number creation date and creation time stored?
Pls help

Hi Donna.
I would like to suggest,
Tables SER01 - Document Header for Serial Numbers for Delivery
Similarly, SER02 to SER07 contains the Serial Number Information for specific module like PO, Delivery,etc.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to create line hart with variable number of data series

Hello,
I am student and I am completely new to Flex programming but
I need to urgently create an app that should have a variable number
of data series but of ame type of object.
eg. Profits for X,Y and Z in in run while just corp X in the
next instance.
How can I accomodate for this in the app? can someone point
me in the right direction I would really greatful as this project
is really crucial for my coursework to get finished in timely
manner.
Thank you

Hey,
I'm not really sure what you want, but you should check out:
http://demo.quietlyscheming.com/ChartSampler/app.html
Which has a list of different types of charts in Flex and
will hopefully help. Also check out charting from ILOG, which is
quite good:
http://www.ilog.com/products/elixir/

TS2755 With the new IOS7 how do i tell which phone number my text messaging is being sent to? on the old system the number used to be highlighted, now nothing is highlighted and i have ended up sending texts to my friends international numbers instead ???

With IOS7 I am finding it impossible to (a) tell which number I am texting, when my contacts have multiple phone numbers, i dont know wether it si their home , monile/cell or international number... How do i differnetiate or know which number it is, especially when they text me from abrioad and i replying ...its not very clear adn has cost me extra in international charges

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

Help about count character number in a text frame

Hi, all
i have a question about how to get the number of character in a text frame. In fact the problem is if there is a table or an image in the text frame, the number of character includes the text in the table.
Can somebody tell me how to count just the number of character of the text .
Thanks in advance!!

Hi! All
On the top of the Toolbox of INDesign CS3, there are two arrows <>, when one clicks it, it will either
1. rearrange all buttons in to one column or from one column to two columns
2. It will change it to horizontal if it is in vertical status.
What are that two arrows called? I mean what name they are. Thanks
Regards,
Z

Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

I dont have my old number anymore and iMessage is still registered on the old number(it's in light grey fonts)I cannot choose or delete this number. Also I cannot recieve text on this number because it doesnt exist anymore. How can I solve this?

I dont have my old number anymore and iMessage is still registered on the old number(it's in light grey fonts)I cannot choose or delete this number. Also I cannot recieve text on this number because it doesnt exist anymore.

You should contact Apple support and ask them to deregister iMessage for the old number.

Vendor Creation (Internal Number Range)

Hi,
My client was creating a new Vendor. The same has an internal number range.
However, the last vendor created was 110016...... while creating a new vendor, the system assigned vendor 110020 as the next internal number, instead of 110017 to be assigned.
Kindly assist as to why has this happened and where can i check the same?

Thanks.......
However that number range has not been assigned to other vendor group....
Also, I have heard of number range buffering in SAP......What is that? How it works? Is there any T Code to check this buffering or any additional configuration is required?
Kindly assist on the same........

Hello, for a multilingual catalog project I would have to know how and with what tool I can place text from Excel or a database in text frames / tables. The basic idea is to provide the text box with an ID (eg text_eng_art_nr_987654 ) and above to ma

Hello, for a multilingual catalog project I would have to know how and with what tool I can place text from Excel or a database in text frames / tables. The basic idea is to provide the text box with an ID (eg << text_eng_art_nr_987654>>) and above to make the connection. Does anyone have a tip. Thanks in advance !!!
Bernd

Data merge is really useful in many circumstances, but my first question would be about the size of the project. A really large catalog might be better handled by processing an IDML in some kind of translation memory tool.
If all of your multilingual content is already in Excel, then it's probably best handled with a Data Merge. Note that you can't save Unicode CSV out of Excel for the merge, so for many languages you'll need to save "Unicode Text" out of Excel and tweak your import settings when you select a Data Source for encoding (Unicode) and delimiter (tab instead of comma).

Do text frames have an (internal) "number / creation date"?

Similar Messages

Maybe you are looking for