Do the hp designjet plotter 755cm is good printer what is the cost of a second hand plotter of that

I am looking to buy a hp designjet 755cm plotter it is a good type and what is the market of the plotter price
JF

Hi,
What is its model ? You can see few on the following link:
  http://www.google.com.au/search?q=hp+designjet+plotter+prices&nord=1&source=univ&tbm=shop&tbo=u&sa=X...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • The case of the mysterious hidden content - second hand iMac

    Dear people with more knowledge than me... (i.e. dear everyone...)
    I have recently purchased a second hand intel iMac (late 2006 model) to replace my trusty (but noisy) Powermac G4 Mirror Door Drive. It was purchased 'wiped' with a fresh install of Lion.
    I used Carbon Copy Cloner to create a backup of my old hard drive (or at least the 60GB partition of it that I was using - I had Tiger installed on it) and then used the Migration Assistant to re-create an image of Zion in the wide expanses of the new promised land (250GB capacity).
    All seemed to go well (but time consuming - it took several days to port everything to/from my USB external hard-drive). A few days later, when I checked About this mac I was shocked to discover that I only had 5GB of storage remaining.
    I did a little poking about and realised I had left a couple of user profiles hanging around during my pre-Migration Assistant faffing. These duplicated much of what I had later migrated over more comprehensively, so I deleted these additional user profiles and this freed up a further 58GB or so.
    My system information now tells me that I have
    249.2 GB Capacity
    63.69 GB Available
    185.5 GB Used
    The used component consists of:
    Audio 137.47 GB
    Movies 7.03 GB
    Photos 9.74 GB
    Apps 3.34 GB
    Backups 0
    Other 27.94 GB
    However, when I go through all my available files and folders using the Finder, the grand total of space that I have used comes to around 88GB:
    My home folder (the only user profile I didn't delete) 42.98 GB
    Desktop 4.09 GB (I know, I know, clean your room...)
    Applications 2.31 GB
    Documents 2.8 MB (yes MB)
    Movies 0
    Music 38.59 GB
    Photos 385 KB (yes KB)
    Total ± 80GB
    Leaving aside for a moment the fact that the disk partition I Migrated over was only 60GB in total (?!), where on earth are the other 97.5 GB of files, and how can I see/delete them to free up drive space I thought I had...?
    ...I imagine that the audio, movies etc., that are unaccounted for actually belong(ed) to the previous owner of the iMac. What I don't know how to do is see/access/delete them to free up disk space. There are no additional users other than my own account that I can see. That's not to say they are not there.
    What can I do?
    Thank you in anticipation of any help or advice.
    v

    verdelay wrote:
    the (hidden) folder _CCC Archives takes up a whopping 107 GB, much of which consists of multiple copies of the same audio files (due to poor file management and copies of copies, I think..). I'm now looking for a utility that will be able to locate and list duplicate files so I can verify that the _CCC Archives folder files are replicated elsewhere.
    I use CCC, but not the "archive" feature (since my main backups are made with Time Machine). 
    According to it's Help, that folder contains the backup copies of files that had been changed on the "source" drive. 
    But this large folder is on your internal HD, right?  Here's what I think happened:
    When you made the original CCC clone from your old Mac, you selected the option to "archive" the copies of things that had been changed.  For some period of time, it did that.
    Later, when you used Migration Assistant, it copied all those old files from the clone (via the Other files and folders on <HD name> option) back on to your new internal HD.
    So yes, the files there should be prior versions of things on your system.
    There are various options to have CCC manage those files.  You can assign a certain size to it, and it will delete the oldest files when necessary to make room for new ones;  or "prune" files after a specified number of days, etc.
    Click Help in the CCC menubar, then CCC help, then review the Backup and archiving settings section:

  • TS3694 i recently purchased  an iphone 3gs every time i try to update it keeps failing and getting error 1015.the phone was purchased second hand so know nothing about its history .all i get now is pic of usb and itunes logo.we went on itunes and now wont

    i recently purchased  an iphone 3gs second hand .wanted to use i tunes and whatsapp but kept saying need to udate to lastes firware or what ever so went on itunes to update. update started but keeps failing now phone wont work at all .all we get is either apple logo or pic of usb and itunes logo.andy help would be gratefully recived only had phone a day.has sony experia and wanted to change to apple and fist time its now useless.

    Sorry to be the bearer of bad news, but the iPhone 3GS can only be updated as far as 4.2.1
    Requirements for WhatsApp are iOS 4.3 or later. This app is optimized for iPhone 5.
    As noted here >  WhatsApp Messenger for iPhone on the iTunes App Store
    So that app cannot run on the iPhone 3GS.
    I stand corrected but apparently you may not be able to update the device regardless.
    Message was edited by: CS

  • Animating a still around a circle as tho it were the tip of a second hand

    I'm new to animating in Motion and can't find how to animate an object in a circle. I'm wanting to animate a photo of someone in a circular path, as if the person's body were the tip of a clock's second hand. The line through the vertical axis of the body should always point to the circle's centre, as though the feet were scribing the line.
    Should I attach the jpeg to a vertical line and animate that as a group in a rotation(with the vertical line invisible to the viewer?

    Many, many ways to do this.
    One way - use the anchor point tool to move the anchor point to the feet, then use a spin behavior to animate the photo. Or - use a motion path behavior with the shape set to circle and add the snap alignment to motion behavior, adjust the radius.

  • HT5312 I have forgotton the answere to my second security question so that i can change my password. I have tried more than 8 times

    I have forgotten the answerer to my second security question and i have exceeded 8 attempts. How should I proceed? I wanted to change my password .

    You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (104422)

  • Stuck in calculating time remaining, what do i do, its my second airport time capsule that i purchased as the first had a faulty hard drive, why is this soo hard!

    This is my second airport time capsule as the first i purchaed had a faulty hard drive, so now, its been a while i keep trying hoping it will work but its always stuck in 'calculating time remaining'. i thought it was my wifi so i connected directly to the capsule using an ethernet cord, bought an adaptor as i have the new macbook air (4m old) 13 inch, still not working. Help please,i am thinknig of just returning it and getting a less expeecsive and easier one to use.
    D

    Mavericks is the pain here.
    It can lose the network connection half way through a backup.
    When you connect by ethernet (good to get that.. hope it is the thunderbolt to ethernet).. did you turn off the wireless.. this is important.. nothing changes if the wireless is still on.
    I recommend you start over. Keep the wireless on for this part.
    Stop the backup.
    Factory reset the TC.
    Redo the TC setup but this time use all short names, no spaces, pure alphanumeric.
    I know the airport utility will suggest apple names..
    Fred Blog's Airport Time Capsule.
    Don't fall for it.
    Use TCgen5
    For wireless name use TCwifi (or if you want more control, TC24ghz and change 5ghz to TC5ghz).
    Wipe the current TM setup.
    Use A4 to reset it. http://pondini.org/TM/Troubleshooting.html
    With wireless off now and just ethernet connection try the backup again.
    No luck manually mount the TC hard disk in finder. Go/Connect to Server.
    AFP://TCname.local (replace TCname with your new nice short name.. and use the domain which is local by default).
    OR
    Use AFP://10.0.1.1 (Replace with whatever IP the TC uses.. but it must be static.. easy for router mode.. not so easy if the TC is in bridge mode).
    The Computer will request the password.. type in whatever password you used for disk access.. by default it ithe device password. If you did not change it then default is public.
    This setup has worked for other people.
    https://discussions.apple.com/thread/5951390?tstart=0
    I cannot guarantee you won't need to reboot the TC oocasionally as it does fall over.
    There are other bits that I keep forgetting..
    Make sure ipv6 is set to link-local for both wireless and ethernet in the computer.
    Once you finish the main backup the short incremental backups can work over wireless.. so just turn wireless back on.

  • How do I reinstall the osx on a second hand macbook pro?

    My partner recently purchased the latest release of the Macbook Pro and gave me his old one. The problem is that it is still tied to his info and passwords and I would like to somehow completely wipe the system and reinstall it afresh. I have his password info, but I would rather use my own info as it is now my Macbook. Would i need to buy a program disk or take it to the Apple Genius Bar to get it wiped and reinstalled? I cannot request him to do it for me as we are now both in different countries. Is this something that I can do by myself? And how?
    Right now the system it uses is Lion (I think) OS X 10.9.4 (13E28)... he updated it shortly before he gave it to me. The Macbook was purchased sometime in late 2011... if that information is of any use.
    My apologies if my question is stupid, but I really wanna get this sorted. Thank you very much for your time.

    Giving away / Selling your Mac / Resetting  the computer to the factory condition
    http://support.apple.com/kb/HT5189
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

  • I have been given a second hand mac pro that does not have a wifi card in it. my router is down stairs so can not connect the mac pro direct into the router can i use my time capsule which uses wifi to my router to connect to the internet?

    I ha

    If you have a non-Apple "main" router, then "join" would have been the only way it could connect.
    Unfortunately, the Time Capsule does not provide any routing functions in this type of setup, so the Ethernet ports are not enabled in this setting.
    If you have an Apple "main" router, it may be possible to enable the Ethernet ports in another type of setting. Then you could connect the old Mac to one of the Ethernet ports on the Time Capsule for Internet access.

  • How do I change the name on a second hand iPad in iTunes

    I bought a used iPad 2 and on my iTunes it has the original owners name. I would like to grange it to mine.

    If you mean the name that appears under Devices in iTunes:
    Click on the name field in the sidebar then press RETURN to activate it. Change to the name you prefer, then press RETURN again.

  • How to change the Validility period of the cost element

    Hi All,
    how to change the validity period of the cost element. In tranc code Ka02 only the text is allowed to change but i want to change the validity period of the cost element.
    best Regards
    stephen

    Hi All,
    Thanks for your response...........
    My  concern is, i have a document posted to 43100 GL Expense acct, which is also defined as cost element, GL field status G004(cost accts). But when the original document is posted no is no assignment of any cost object.
    But i have to reverse the document and when i use FB08, the reversal is popping up with error " Assignment of CO object is neccesaary " Assign the cost center.
    Is there any way we can update the cost center for posted docuemnt? if so how? and can i make the cost element invalid for previous month so that it will not ask for cost object and change the field status of the GL from g004 to G001 only for reversal and set it back after posting is done.
    Appreciate ur feedback and suitab;le points are rewarded with points.
    best

  • Posting of Commission Exp to calculate the Cost of Goods Sold

    Hi Team,
    I do work in an automobile manufacturing organization and is new to SAP FI module. I have a business requirement which I need to fulfill; I would appreciate if all you gurus help me with finding the solution.
    Business Scenario:  at present, we are posting the following entries to record the commission we paid to dealers for selling vehicles.
    Commission Exp (DR)
         Customer (CR)
    Customer (DR)
         Dealer (CR)
    With these entries we are not been able to track the commission based on vehicle variants i.e. Toyota GLI, XLI etc.
    New Requirement:
    To calculate the Cost of Goods Sold for a variant, I need to track the commission expense based on vehicleu2019s variants. Please help me in finding the solution.
    Thanks

    Thanks for quick response.
    Let me give little more details of type of commission entries we have
    1) Normal Commission - Fixed commission variant wise and is derived from SD.
    2) Additional Commission - No predefined formula, this is totally based on top management discretion. Management decides how much would be paid to a particular dealer.
    3) Sliding Commission deduction - Deduction of certain amount from commission on late payments.
    4) Additional Sliding Commission - Payment of additional commission based on early payment terms.
    Currently, FI department is calculating all these figures on Excel sheets and then post a JV for each type of above mentioned commission.
    How can I configure the system to calculate these amounts automatically without involving Excel Sheet help?
    and how to post these amounts variant wise along with dealers and customers.

  • Ordered item to absorb the cost of the free goods

    We have created an exclusive free goods agreement and we would like the ordered item to absorb the cost of the free goods.  In order to transfer the correct information to CO-PA from SD billing, what should we do? Can anybody explain briefly?

    Hi Yasar,
    we do the setting for this in copy controls from delivery to billing.
    pl go to t.code VTFL, select the item which is required to abasorb the cost.
    there you will find a check box " cummulate cost ". Tick it here, this will make the cost of the free item to be transferred to the main item. This can also be used even incase of BOM's.
    regards
    sadhu kishore

  • Good evening, my name is Ludmila I have a problem. im buy second hand iphone 5 but I can not use the screen shows asking me apple id but I do not know this is my first iphone I do not know what the police thought it was stolen or lost but I you can help m

    Good evening, my name is Ludmila I have a problem. im buy second hand iphone 5 but I can not use the screen shows asking me apple id but I do not know this is my first iphone I do not know what the police thought it was stolen or lost but I you can help me. Someone told me we should stop function Find my iphone but how?? email does not even know the first lord. It cost me 400 euros but may not use iphone. someone laugh at me because I deceived. Please help me tell me his email talk to you should stop off iCloud or ID

    Scuzati de engleza google translate

  • I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G.  All the settings on the iPad are correct.  It just shows that it's searching for a signal.  I'm in an area where my signal (pre OS8) was very good in strength.  Please help!

    I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G.  All the settings on the iPad are correct.  It just shows that it's searching for a signal.  I'm in an area where my signal (pre OS8) was very good in strength.  Please help!

    Hello Jpahlphoto!
    I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
    Please restore your iPad and see if that does the trick. You'll find the steps here:
    http://bit.ly/16hQAlr
    Thanks,
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • HT4623 While in Japan on a trip, I updated my iPhone to iOS6.  Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store.  How do I do that so I can download and update apps at home in the US

    While in Japan on a trip, I updated my iPhone to iOS6.  Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store.  How do I do that so I can download and update apps at home in the USA?

    Your Apple ID is tied to the US store. Log out of the store, then trying logging back in.

Maybe you are looking for