Do the older 'film SLR' third party EF lenses work with new Canon DSLR's

I have an old film EOS Rebel G with two lenses (Sigma 28-80 Macro) & (70-300 Quantaray 1:4-5.6 LDO Macro).
I got away from the SLR style camera several years ago and am now looking to take the plunge again as the quality of the point and shoot and smart phones can't compare.
I tested both of these lenses on a friend of mine's Canon T3i. The lenses would not auto focus. I thought since his camera had the 'red dot' mount they would function but they would only work as a manual focus. My initial thought was that his camera is really designed to support the EF-S style lens that that is why it could not auto-focus.
Am I truly out of luck or will some of the higher end (full frame) DSLR's support the auto focus features of these lenses? Or do the new Canon's not support older third party lenses?
Thanks,
Chris

Hi New2dslr,
While older Canon EF lenses work with our new cameras, we can't be certain with third party lenses. If modifications for the lenses are not available from their respective manufacturers, I recommend investing in some good quality Canon lenses..
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

does PI need a direct connection to third party or can work with a proxy server based connection to third party?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

Please authorize ADE 3 with same credentials that you used with older version of ADE

In iOS8, my third party keyboards are working with every app except for the standard "Messages" app. How do I fix this issue?

I recently updated to iOS8 and downloaded a few third party keyboards. These keyboards are usable and available with all apps except for the "Messages" app. The third party keyboards don't even show up as an option while typing a text message or an iMessage. I have allowed these keyboards Full Access and have turn off Guided Access.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Any free third-party apps that work with Photos.app?

Since iPhotos no longer work with iOS8 I was looking for a free good third-party app that could work with the Photos.app like the Photo Kit ones.
I would really appreciate if someone could tell me.

There are some links to other reported problems here:
http://discussions.apple.com/message.jspa?messageID=5653683#5653683
Macintouch is worth watching:
http://www.macintouch.com/readerreports/leopard/index.html#d27oct2007

How can I get my third party plugins to work with PSCC?

I use third party plug-ins from two different companies and they all worked during my PSCC trail period, but now PS won't recognize any of them. I've tried re-installing them using the custom install process, but they still don't work. Tech support has been useless, and I'm getting very frustrated. Can anyone here help?

Are you saying your trial expired but you liked CC so you are now subscribing? Or are you saying you went back to CS6 or another previous version.
What plugins are they?
Did they work on the before on that build before you tried CC?
I am just wondering if you are only allowed to use them once thats all, which in itself is a little wierd.
Usually when people have plugin issues its to do with 32 / 64 bit ones, as they don't interplay with each other. Eg you trialled a 32bit bit cc and used the 32bit plugins, but actually subscribed to 64bit cc
When you say tech support is useless, are you reffering to the plugin tech support or Adobe? Assuming you mean adobe did you try the plugin supplier?

Will older Airport Express Base Station A-1084 work with new AirPort Extreme? I want to use it as an access point for my ps3 for watching movies and just connectin to Internet.

I am lookin to plug in an older model a-1084 next to my playstation for a dedicated access point to avoid dropping so many connections since I am at the furthest point of my wifi coverage. Will it work or not? It would be connecting through a AirPort Extreme bought in 2011 -2012.

This will work if you plan to connect the AirPort Express using a wired Ethernet connection back to the AirPort Extreme.
But, it won't work if you plan to connect the Express using wireless only. That's because your older version of the Expess does not have a setting to "extend a wireless network", so it's not possible to "extend" the wireless signal using wireless only.
If you added a "new" AirPort Express, that version does have the capability to "extend a wireless network" from the AirPort Extreme using wireless only.
Keep in mind that to "extend" using wireless, the Express will need to be located where it can receive a strong signal from the AirPort Extreme, since the Express can only "extend" the quality of signal that it receives. In other words, the Express can make the signal go further, but it cannot make the signal go faster.

My list of third party apps that work with Leopard (and those that don't)

Here is my list of my apps that worked fine with Tiger, and those that do (or don't) work with Leopard:
My apps that work with Leopard (in alphabetical order):
BBEdit 8.6
Bryce 6.1
Fetch 5.2.1
Filemaker 8.5
Graphic Converter 5.9
Lotto Sorcerer 6.9
Mariner Calc 5.5.1
Navicat 6.3.7
Poser 6 (but LONG delay after splash screen)
REALBasic 2007r4
ReadIris Pro 9.0
Topo 3.3.3
TurboCAD Mac Pro v2
Those that don't work with Leopard:
None so far!

There are some links to other reported problems here:
http://discussions.apple.com/message.jspa?messageID=5653683#5653683
Macintouch is worth watching:
http://www.macintouch.com/readerreports/leopard/index.html#d27oct2007

GR date (MIGO) as the Billing date in Third Party Sale

Dear All,
I have a scenario where the GR date should be the billing date in third party sale.
Can it be accomplished by any user exits of billing? Please share your ideas and if this can be done through user exit, please name the user exit.
Thanks in advance.
Regards,
Ipsit

hi,
read sales order number or PO number or get the information from document flow of VBFA if pO exists thengo to PO history in EKBE table if BWART - 101 then trigger billing document with reference to SALES ORDER on the same day.
for that you need to create a Back Ground Job in SM36.
balajia

What are the key questions for third party order process?

hi all,
what type of questions can i receive for third party order process?
pls.. do the needful
thanks to all.

Hi arun,
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and,   therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
      Order Type
      Sales org, distr chnl, div
      Enter
      Sold to
      PO #
      Material
      Quantity
      Enter
      Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
      Order Number
      Goto Item Overview
      Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
      Key in the PR number
      Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
      Key in the PR number
      Toggle the "Assigned Purchase Requisition"
      Execute
      Check the box next to the material
      Assign Automatically button
      Click on "Assignments" button
      Click on "Process assignment"
      The "Process Assignment Create PO" box , enter
      Drag the PR and drop in the shopping basket
      Save
SD - 3rd party sales order Receive Goods
MIGO_GR
      PO Number
      DN Number
      Batch tab , click on classification
      Serial Numbers tab
      Date of Production
      Flag Item OK
      Check, just in case
      Post
      Save
SD - 3rd party sales order Create Invoice
MIRO
      Invoice Date
      Look for the PO , state the vendor and the Material
      Check the box
      Clilck on "Copy"
      Purchase Order Number (bottom half of the screen)
      Amount
      State the baseline date
      Simulate & Post
      Invoice Number
      *Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
      In the order screen , go to the menu Sales Document , select "Deliver"
      Go to "picking" tab
      State the qty and save
SD - 3rd party sales order Create a billing document
VF01
      Ensure that the delivery document is correct in the
      Enter
      Go to edit -> Log
      Save
Pl. be clear on this process.
Also understand how migo and miro are handled.
The item categories used.
How the company knows of the shipment of goods to the customer.
How returns are handled.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

What is a good third party display to use with the Mac Mini?

The Acer monitor I bought simply doesn't work with my first generation Mac-Mini. When connected to the VGA connection I get a "input not supported" message. When I connect the DVI, the screen blacks out when I scroll and then comes back, at first I thought it was just with Firefox but soon discovered it was with any application I used. After some research on the internet I discovered that there is a problem with the firmware design on the DVI's on Acer Monitors. My new Acer monitor is enjoying it's new home in my sisters office, on her desk, connected to the VGA plug on her computer, enjoying Windows XP.
At another web site for the Mac-Mini I was told that there are not that many displays that work for the Mac-Mini and I would be better off purchasing an Apple display, only problem is that the Apple displays are not within my budget. I would like some suggestions on this board from users as to what third party displays they use with a first generation Mac-Mini? I'm looking in the budget range of $200 to $250 dollars. I have a first generation Mac-Mini, Mac OS X Panther.
PS I have tried setting monitor resolutions using both the VGA and DVI plug, they don't work.
Thank you for any help I receive.

Charles,
I cannot speak on behalf of hooking this model of monitor up to a mini, however I do have a 19" Planar monitor at home hooked up to an old G4 tower via VGA, and the 19" Planar monitor that I have at work is hooked up via digital to my G4 15" PowerBook. I love both of these Planar 19" LCD monitors, and have absolutely no complaints. Planar's three year warranty is nice, and their tech support is top notch. I had an issue with the monitor at work, and I had a replacement on my desk in two days. Returning the bad monitor in the pre-paid box that the new one came in made things effortless. We have a few Planar's in the school district that I work in, and have no major issues with any of them.
Not too sure what the most recent pricing is on this model, but CDW was selling them for around $225-$230 delivered right to your door.
Hope this helps.

What are the stpes to configure third party tools in BW

Hi all,
can you please send me any documents on "what are the stpes to configure third party tools in BW"

Hi,
1> Define the RFC connection ;ex:-Define the IP address using SM59
2> Define the third pary sourcesystem
3>Assign it to infosources
4>Map and define transformation rules
5> Create Infopackage and load the data.
I hope it would help you.
Regard's
Prasad

Come here and discuss the business process of Third Party Purchase Order?

come here and discuss the business process of Third Party Purchase Order?
when this po is used and the following process is what?

Hi YuLin
It is a vague topic..anyways i will tell you one important scenario of the 3rd party order :Third Party Without Shipping Notification(its imp one)
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you.
In this scenario, the vendor does not send a shipping notification. The incoming invoice from the vendor updates the billing quantity, so that the customer-billing document is only possible after entering the invoice from the vendor
Function List
The following functions are provided to support the Third Party Without Shipping Notification (J55) building block:
When the order is created, the specification of material numbers, quantity and conditions takes place at item level. As the material is not available on stock, a purchase requisition is created directly within the sales order.
Purchase Order Processing
The purchase requisition can already be automatically assigned during creation. If not, it is possible to assign the purchase requisition manually. The purchase order is created with reference to the purchase requisition. The quantity and the material are transferred from the sales order. The purchase order price can now also be determined using condition records.
Vendor Invoice Verification
The vendor invoice verification must take place before customer billing. The quantity of the invoice updates the quantity to be invoiced in the sales order.
Billing Documents
The billing documents are carried out on the basis of the order. Since the vendor might not deliver the exact quantity ordered, quantity adjustment takes place through the quantity in the vendor's invoice.
Controlling
The revenue and costs will be posted to CO-PA via the billing document
Key Points
As no shipping notification is available, the customer invoice can only be created after having finished vendor invoice verification.
Normal process you can refer in help.sap.com under this link
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b91d843ad11d189410000e829fbbd/frameset.htm
regards
Yogesh

What is the best third party keyboard for kids with motor disabilities?

What is the best third party keyboard for kids with motor disabilities?

Got to the App Store and search on Keyboard - there is one in colors, Keyboard Pro, and others. See if one of those looks like it would serve your needs batter than the built-in keyboard.

Activate a call forward with a Third-party SIP Device or with a analog device

Hi,
In a CUCMv9, how i can activate a call forward (all, busy, no anwser...) with Third-party SIP Device or with a analog device connected to a fxs?
I want to activate a call forward like a Alcatel or Aastra PBX with a code.
For exemple, i pick up the phone, with the code *95 followed by the destination number and hangs up the phone. And use the #95 for désactivate this call forward.
It's possible?
Thanks.

No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.
Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.
For FXS that's only doable if you're running SCCP
http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Do the older 'film SLR' third party EF lenses work with new Canon DSLR's

Similar Messages

Maybe you are looking for