Do u have to place a close vi on every siganl whether it b a read or write
when programming fielpoint through labview, do u have to place a close vi on every read and write signal u program and if so does it apply to every signal when you have multiple inputs and outputs
You only need one FP Close.vi and it should be placed at the end of the program when you are ready to shut down the FieldPoint Server.
Regards,
Aaron
Similar Messages
-
After customizing Leopard icons: I have no minimize/maximum/close buttons on every window
hey,
I was so careless to play with some 3rd party icons, which were in .icns format (Mistikons09_ic.dmg). Actually, I was so stupid that I didn't use some software (eg. CandyBar) to open those .icns files. After I accidently clicked on one of those .icns file, the minimize/maximum/close buttons were gone from every window frame, and only left some tiny dots on the original location...In addition, some small components of the GUI were also changed, as shown below...
Then I tried to use CandyBar or some other softwares to restore the default Leopard icons, but I failed...
Can anyone kind to tell me how to restore everything?
Thank you so much!You're going to have to reinstall the system. Fortunately, the Snow Leopard installer will install right on top of your existing system, so you'll have minimal disruption. (Have backups just in case, though!) After reinstalling, run Software Update to bring everything back up-to-date.
-
Where we have to open and close posting periods in asset accounting
hi sap gurus
can anybody give where we have to open and close posting periods in asset accounting
thank you
venkatareddyHi Venkatareddy,
You make specifications for fiscal years and posting periods in the SAP R/3 System in Customizing for Financial Accounting. This is done in the fiscal year variant in the global parameters of the company code. These settings are, in general, also binding for Asset Accounting. The depreciation periods in Asset Accounting then correspond to the posting periods in Financial Accounting.<b> It is usually not necessary to create a separate fiscal year variant for Asset Accounting.</b>
The period control in the depreciation key determines the start and end of depreciation when asset transactions are posted . The period control determines the relationship between the calendar period in which the asset transaction is posted and the depreciation period.
These calendar periods are independent of the posting periods in Financial Accounting. The only restriction is that the beginning of the first calendar period and the end of the last calendar period defined in a period control have to match the start date and final date of the fiscal year in Financial Accounting.
Kindly let me know if this useful for you -
I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a page.
Also I have noticed opened windows that I have not opened.
I have verified the sharing folder and also the remote access but it not let me turn it off.
Also I have add a password to my computer and even using the same one it looks like is not working.
The I photo stopped working, Mac Mail does not let me add rules (this is from one day to the other)
The computer is mine, the internet I use is payed by me with a password. I did not give permission to anyone to use my computer or share my files.
In system preferences in the sharing folder is showing everyone and staff.
My computer is private I do not own a company and I do not have a network set up in my house.
I had my photos removed from my computer and even after trying to reinstall I photo and fix the Mac Mail is not working.
I am receiving emails saying that I have sent emails to people that I do not know and including in a time where I am working and not using the computer.
Any suggestions in how to fix this issue?
I really appreciate.With the multitude of issues you have I would take it to an Apple store or AASP and have them sort it out. Then I would sign up for Apple camp or one on one.
-
System don't have menu Open and Close Posting Periods
Hi,
My system don't have menu "open and close posting periods" (full path in below). I search in google say that my system should active Public Sector Management to use this function.
I need to make sure before active, please help me if you known about this. And what BCSet will I need to active, is it IS-PS-CA ?
Thank you very much,
Regards,
Thanh.
Full menu path:
Accounting - Financial Accounting - General Ledger - Environment - Current Settings - Open and Close Posting Periods According to G/L Account Assignment ObjectsHi,
You can use this Txn. OB52....
1. Goto SFW5..
2. Choose "Enterprise Addons" tab..
3. Against Business Function EA-PS...Change the Status to On and then activate..
4. Log off and Login again...now check the menu path.
Also check this. (for SAP ECC 6.0 version)
SPRO>Financial Accounting (New)>Financial Accounting Global Settings (New)>Ledgers>
Fiscal Year and Posting Periods>Posting Periods>Open and Close Posting Periods
Regards
GK.
Edited by: Gnana Kumar on Nov 19, 2010 9:49 AM -
my macbook is going to sleep while I'm working or viewing something. I will sometimes have to open and close it several times to get it to "wake up" again. Also, no sound comes out of my Macbook. I only hear with earbuds or headphones. Any suggestions?
If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Triple-click anywhere in the line below to select it:
syslog -k Sender kernel -k Message CSeq "Previous Shutdown" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that. -
Help! I have tried to set up an iCloud account for my iPhone. However, the final step for verification is to accept terms in the email that was sent to me. The only problem is that the email that was indeed sent to me did not have any place where I COULD accept the terms and so forth.
So now I am stuck! What do I do now? I'd really love to have an iCloud account.
Thanks for any help you can offer.Help! I have tried to set up an iCloud account for my iPhone. However, the final step for verification is to accept terms in the email that was sent to me. The only problem is that the email that was indeed sent to me did not have any place where I COULD accept the terms and so forth.
So now I am stuck! What do I do now? I'd really love to have an iCloud account.
Thanks for any help you can offer. -
How can you tell if all photos in an event have a Place assigned?
How can you tell if all photos in an event have a Place assigned, without clicking every photo in the event individually with the Info bar open to see if there is a little map in the bottom left hand corner please?
cheersTerence Devlin wrote:
File -> New -> Smart Album
Event -> Contains -> Name of Event
Plus
Place -> Does not contain -> leave the last field blank
Thanks for that, just getting used to these brilliant smart albums, do I have to have one of these smart albums for every event though? can I not just use it for all photos?
cheers -
I have an 2007 mac book pro that does not have a place for HDMI cable. Can you please tell which converter I need?
You will need something such as this:
http://www.amazon.com/A-Sonic-HDMI-HD15-Male-Cable/dp/B001OLCHJ6
Ciao.
Note that this will only transmit video. If you need sound, the audio output port will have to be tapped.
Message was edited by: OGELTHORPE -
I use a 27inch lcd screen. what do i have to do to close the mac book when using the big screen????
i use a 27inch lcd screen. what do i have to do to close the mac book when using the big screen????
Here is Apple's instructions:
http://support.apple.com/kb/ht3131
Regards,
Captfred -
Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.
Already changed in different settings. Here is a screenshot when set to "Original Size".
-
Your download page for 5.0 stated: All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again.
I liked the convenience of using App Tabs and was disappointed to find that the ones I had set up yesterday were gone today. Am I doing something wrong?Works fine for me, I can simulate your problem by improperly closing Firefox.
The correct way would be to close the windows you don't want and then to exit Firefox through the File ("'''Alt+F'''") menu then use '''Exit''' or '''Qui'''t depending on your system.
But '''I can simulate your problem''' by closing the good window with "X" in the upper right-corner first (the one with the app-tabs) and then close the other window by any means.
You restart Firefox and open a window, since you closed without app-tabs there are none so you just see a window with your home page.
Firefox has some things added to Firefox 4 and therefore in Firefox 5.
# "'''Alt+S'''" (Hi'''s'''tory menu)
# "'''Restore Previous Session'''" (that's the window without the app-tabs, but you have to this first)
# "'''Restore Recently Closed Windows'''" -- can choose which window to reopen based on name and the mouse-over tells how many tabs. or you just use "'''Restore All Windows'''" without the guessing.
''I know you are on a Mac, and this affects Windows user more than anybody else, but it does affect other systems besides Windows, occasionally, perhaps more often now with the plugins container.''
The following may not completely eliminate having to terminate Firefox through the Windows Control Panel but it will come very close.
'''Plug-in and tasks started by Firefox may continue after attempting
to close Firefox''' The "X" in the upper right-hand corner closes the
Window (same as Ctrl+Shift+W) but even if it is the last Firefox window,
it does not necessarily close Firefox .
The only '''proper way to exit Firefox''' is to use '''Exit''' through the
File menu, not the "X" in the upper right corner of last Firefox window.
In the Firefox 4 and 5 that would be Alt+F then X
* '''Firefox hangs''' | Troubleshooting | Firefox Support <br>http://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
Use the '''Windows Task Manger''' to remove all running firefox.exe in the "'''Processes'''" tab of the Windows Task Manager, then restart Firefox.
If Firefox will still not start, remove the parent.lock file from the profile which is created each time Firefox is started to prevent other Firefox tasks from running, see<br>
http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file
'''Avoiding Problems with close/restart''' ''choose either extension''
:Use to close and restart Firefox after enabling or disabling an extension, switching to a new theme, or modifying configuration files, then you don't have to worry about delay or have to look in the Task Manager to see if Firefox is closed yet.
Both extensions use the same keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
*"'''Restartless Restart'''" extension for Firefox 4.0+ only (2 KB download ) <br>https://addons.mozilla.org/firefox/addon/249342/
*For older versions use "'''QuickRestart'''" extension (34 KB download) (<br>https://addons.mozilla.org/firefox/addon/3559/ -
My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.
I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike -
After hitting Command-F, I now have to place the cursor in the text box!
Since I upgraded to 10.5.7, when I search using Command-F, the cursor no longer defaults to inside the text entry field in the search window. After it opens, I still have to place the cursor before typing. Is there a way to change this? Why would Apple add an extra step in what should be a simple operation?
I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences
-
Is their a way to log whether interactive logons have taken place
Hi Gurus,
We need to change the service userID to System type, and ensure that all functionality continues to work in Production systems. (The userID embedded into RFC connections)
Before changing the user type for the userid I would like to know if there is any way to log whether interactive logons have taken place for the Service user.
We need to ensure that everything works when the userID is changed to System.
Please let me know if there is any to see the log for the service user which had interactive logons.
Regard'sSalman,
Yes salman, you need to create profile and then activate it.
In SM18 you can define the days for which you want to keep the logs it depends on the company policy and size of log
In SM19 Activate the profile required for audit log like for all users you can activate only critical events while for critical users select all events.SM20 you will just use for the reading the logs. (if required)
http://searchsap.techtarget.com/tip/SAP-security-audit-log-setup (ECC6)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0bfafc5-0709-2d10-2fb9-e8c9e7525d5b?quicklink=index&overridelayout=true for (ECC)
http://www.sap-img.com/basis/the-step-required-to-audit-at-the-user-level.htm
http://www.erpgenie.com/sap-technical/basis/the-step-required-to-audit-at-the-user-level
NOTE:
Activating the audit log
The following instance profiles must be set in order to activate audit logging (use transaction RZ10 to do so
rsau/enable: Set to 1 to activates audit logging
rsau/loc
Thanks,
Sri
Maybe you are looking for
-
for integration purpose, how can you go and check data in the cube and validate it against the query data ? i know we can go to corresponded infocube and right click "display data" but what's on the query is not available when i execute "display data
-
Agent commission process configuration
Dear All, I am trying to configure Agent commission process. Based on the information available on various threads and links provided in the threads, i ahve completed configuration of below steps. 1. i have configured new partner function ZA (commiss
-
Message sutck in TBDL in Adapter Engine
Hi all, We use RequestResponseBean and ResponseOnewayBean in the conversion from Async RFC to Sync SOAP. There was a big message load on this integration this morning. In the Adapter Message Monitoring, I found thousands of messages stuck in TBDL sta
-
How do I format the layout of my pages in Iphoto for a book?
How do I format the layout of my pages in an iphoto for a book?
-
Thumbnails for TIF files are not latest image-CS3
When I save a (flattened) image in TIF, I get only a partial thumbnail--often a previous layer or selection or something from the clipboard. This is in CS3 (on XP) but also used to happen in PS7.