Do VM Server and VM Manager two dedicated pc's??

Hi!!
If I shut down the pc with OVM Manager, will the system fail??

I believe you mean running the VM Manager in the VM Server dom0. You'd need to allocate at least 2GB to dom0 to support the memory requirements of the Manager. Also, this is not supported, and trying to get it to work can take a lot of time. The dom0 doesn't have the necessary packages to install the Manager.
In another thread you were asking about running the Manager in a VM on the Server. You'll need 2GB for the Manager VM, 512MB for the Server, what's left can be used for other VM's. With 3GB, there's very little left. 4GB may work.
You could use an old 2GB pc or laptop as your Manager system. It runs fine on a P4.
Edited by: herb on Aug 28, 2009 4:52 PM

Similar Messages

Recommended configuration for Oracle VM Server and VM Manager

Hi,
Currently we have two dedicated DELL servers (VM server and VM Manager) for which are building an Oracle stack environment.
We are facing a problem which we didn't find answer from Oracle docs or via Google. The problem is that the virtual machines we create in VM Manager can't be connected to the outside world, and we think it's because our host (Hetzner) does not allow ports eth1-eth3 to be connected to the servers, unless we have these servers in the same rack and connected via switch.
Our question is, is it recommended configuration to have VM Server and VM Manager servers in the same rack and connected via switch?
If yes, the next question is, if we need in the future to add one more dedicated DELL server to our configuration to host virtual machines, is it possible if the new third dedicated DELL server is not connected via switch to the two dedicated DELL servers we have already have?
If no, the next question is, what could be the recommended configuration and solution to our problem in our case that ports eth1-eth3 cannot be connected to the servers?
Please do not hesitate to ask if you need more information. I do appreciate your time and expertise. Thanks.

The architectural environment is now done like on this graphic. For security reasons Hetzner hosting service does not allow ports eth1-eth3 to be connected, but in internal network under switch they do.

Is it possible to Run VM Server and VM Manager on a single machine

Hi,
I'm trying to learn VM and I downloaded both the VM Server and Manager from E-Delivery. The guide says I need two separate machines for the VM server and VM manager.
Does this mean I've to install the VM Server first and then Install VM Manager on a different machine, create the Virtual Machines and then run the Virtual Machines on the VM Server?
If I've got only one laptop, does that mean I've to install the Enterprise Linux first, install the VM Manager, create all the VM Machines I'll need from the Installation sources, then install the VM Server on the machine a fresh and run the created VM Machines on it?
I'm relatively new to Virtualization and any help would be highly appreciated.
dula

There are other messages about running OVMM in the first VM on an OVM Server.
Yes, Oracle supports them both being on the same physical system. They even supply a template for it.
I tried to install it yesterday, but hit a resource snag. The testbed system I have available only has 2GB of memory and the OVMM template installation script aborts if the OVM Server does not have more than 2GB of memory. So my experiments for a faster DR process will have to wait for better hardware.

1 NodeManager, 1 Admin Server and 2 Managed Servers

Hi All, I'm new in Weblogic and this is my 1st time to post a question on this forum. Would like ask for help from you all above my setup, I'm not sure whether it will work or not. Please find out the scenario below:
Setup:
1 Machine (RedHat Enterprise Linux 5.5)
1 NodeManager
1 AdminServer (Name: APP)
2 Managed Servers (Name: APPLIVE, APPUAT)
Currently I would like to using one NodeManager to control both Managed Servers under 1 machine. When I configure my APP Admin Server and two Managed Servers, i would like to nmEnroll both Managed Servers under one NodeManager but it will overwrite my enroll entries if i enroll 2nd Managed Server.
Is it possible to configure NodeManager to accept both Managed Servers entries? Thanks. :)
Edited by: user13602952 on Jan 2, 2011 9:54 PM

Hi Hong,
Following are the few things which you help you understand about NodeManager and nmEnroll
- First of all a Node Manager process is not associated with a specific WebLogic domain but with a machine
- When you run a nmEnroll then you just give "domainDir" and "nmHome" which would then gets the file called "*nm_password.properties*" which contains the encrypted username and password that is used for server authentication and "*SerializedSystemIni.dat*" file.
Example:
nmEnroll([domainDir], [nmHome])
- With above files it also updates the nodemanager.domains file with the domain information which was mentioned in the above command.
Thus when you run the nmEnroll command it would get all the details which it needs to start any managed servers in the same Machine, hence you do not need to run the same commend for each managed servers in the same Machine.
For more information have a look at the below links:
Topic: Search for "nmEnroll"
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/config_scripting/reference.html
Topic: Overview of Node Manager
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/server_start/nodemgr.html#1091317
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic…

Oracle HTTP Server and Node Manager

Hi,
I installed Oracle HTTP Server with Node Manager. I set "CrashRecoveryEnabled=true" in the nodemanager.properties. It works fine when I reboot the machine, but when I kill the root process (kill -9), the new process can not be started as the previous process does not have enough time to die and still uses the ports. I tried to run "nmGenBootStartupProps" in wlst, or set the
RestartMax=2
RestartDelaySeconds=5
variables in "[domain_name]/servers/[server_name]/data/nodemanager/startup.properties" - no success.
Any ideas, how to set the number of retries and the delay between restarts?
Versions:
Oracle HTTP Server: version="12.1.3.0.0"
java version "1.7.0_79"
OHS log:
[2015-05-04T11:43:48.0653+02:00] [OHS] [NOTIFICATION:16] [OHS-9999] [mod_weblogic.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18651] [tid: 140166670751552] [user: app] [VirtualHost: main] WebLogic Server Plugin version 12.1.3 <WLSPLUGINS_12.1.3.0.0_LINUX.X64_140421.1459>
[2015-05-04T11:43:48.0854+02:00] [OHS] [NOTIFICATION:16] [OHS-9999] [core.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18651] [tid: 140166670751552] [user: app] [VirtualHost: main] Oracle-HTTP-Server-12c/12.1.3.0.0 (Unix) mod_ssl/12.1.3.0.0 OtherSSL/0.0.0 mod_plsql/11.1.1.0.0 configured -- resuming normal operations
[2015-05-04T11:48:53.9584+02:00] [OHS] [INCIDENT_ERROR:32] [OHS-9999] [worker.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main] (98)Address already in use: make_sock: could not bind to address 192.168.0.226:80
[2015-05-04T11:48:53.9585+02:00] [OHS] [INCIDENT_ERROR:20] [OHS-9999] [worker.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main] no listening sockets available, shutting down
[2015-05-04T11:48:53.9585+02:00] [OHS] [ERROR:32] [OHS-9999] [core.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main] Unable to open logs
Node Manager log:
<May 4, 2015 11:37:50 AM CEST> <INFO> <Loading domains file: /opt/app/soalb_domain/nodemanager/nodemanager.domains>
<May 4, 2015 11:40:18 AM CEST> <INFO> <Loading identity key store: FileName=/opt/app/soalb_domain/security/DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<May 4, 2015 11:40:18 AM CEST> <INFO> <Loaded NodeManager configuration properties from '/opt/app/soalb_domain/nodemanager/nodemanager.properties'>
<May 4, 2015 11:40:18 AM CEST> <INFO> <Node manager v12.1.3 #1604337>
<May 4, 2015 11:40:18 AM CEST> <INFO> <soalb_domain> <soalb_server1> <Startup configuration properties loaded from "/opt/app/soalb_domain/servers/soalb_server1/data/nodemanager/startup.properties">
<May 4, 2015 11:40:19 AM CEST> <INFO> <Secure socket listener started on port 5556, host localhost/127.0.0.1>
<May 4, 2015 11:43:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <The server 'soalb_server1' is running now.>
<May 4, 2015 11:48:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <The server 'soalb_server1' with process id 18672 is no longer alive; waiting for the process to die.>
<May 4, 2015 11:48:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <Server failed so attempting to restart (restart count = 1)>
<May 4, 2015 11:48:54 AM CEST> <SEVERE> <soalb_domain> <soalb_server1> <Unexpected error while monitoring server>
java.io.IOException: Failed to start the server soalb_server1
Check log file /opt/app/soalb_domain/system_components/OHS/ohs_nm.log
Check log file /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log
        at oracle.ohs.plugin.nodemanager.OhsProcessManagementPlugin$ProcessImpl.buildIoException(Unknown Source)
        at oracle.ohs.plugin.nodemanager.OhsProcessManagementPlugin$ProcessImpl.start(Unknown Source)
        at weblogic.nodemanager.server.DecoratedSystemComponentManager$DecoratedProcess.start(DecoratedSystemComponentManager.java:129)
        at weblogic.nodemanager.server.ServerMonitor.startProcess(ServerMonitor.java:441)
        at weblogic.nodemanager.server.ServerMonitor.runMonitor(ServerMonitor.java:406)
        at weblogic.nodemanager.server.ServerMonitor.run(ServerMonitor.java:295)
        at java.lang.Thread.run(Thread.java:744)
ohs_nm.log:
<2015-05-04 11:48:53> <INFO> <OHS-0> <The server 'soalb_server1' with process id 18672 is no longer alive; waiting for the process to die.>
<2015-05-04 11:48:53> <INFO> <OHS-0> <Server failed so attempting to restart (restart count = 1)>
<2015-05-04 11:48:53> <INFO> <OHS-4018> <Starting server soalb_server1>
<2015-05-04 11:48:53> <INFO> <OHS-0> <Running /opt/app/ohs12c/wlserver/../ohs/bin/httpd.sh httpd.worker -k start -f /opt/app/soalb_domain/config/fmwconfig/components/OHS/instances/soalb_server1/httpd.conf>
<2015-05-04 11:48:53> <INFO> <OHS-0> <[Mon May 04 11:48:53 2015] [warn] Errors will be logged into /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log>
<2015-05-04 11:48:54> <INFO> <OHS-0> </opt/app/ohs12c/wlserver/../ohs/bin/httpd.sh httpd.worker -k start -f /opt/app/soalb_domain/config/fmwconfig/components/OHS/instances/soalb_server1/httpd.conf: exit status = 1>
<2015-05-04 11:48:54> <INFO> <OHS-4005> <Check the instance log file for more information: /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log>
<2015-05-04 11:48:54> <SEVERE> <OHS-0> <Failed to start the server soalb_server1>
<2015-05-04 11:48:54> <SEVERE> <OHS-0> <Unexpected error while monitoring server>
Node Manager properties:
#Wed Apr 29 18:31:26 CEST 2015
#Node manager properties
#Wed Apr 29 17:18:21 CEST 2015
DomainsFile=/opt/app/soalb_domain/nodemanager/nodemanager.domains
LogLimit=0
PropertiesVersion=12.1.3
AuthenticationEnabled=true
NodeManagerHome=/opt/app/soalb_domain/nodemanager
JavaHome=/opt/app/jdk1.7.0_79
LogLevel=INFO
DomainsFileEnabled=true
StartScriptName=startWebLogic.sh
ListenAddress=localhost
NativeVersionEnabled=true
ListenPort=5556
LogToStderr=true
SecureListener=true
LogCount=1
StopScriptEnabled=false
QuitEnabled=false
LogAppend=true
StateCheckInterval=5000
CrashRecoveryEnabled=true
StartScriptEnabled=true
LogFile=/opt/app/soalb_domain/nodemanager/nodemanager.log
LogFormatter=weblogic.nodemanager.server.LogFormatter
ListenBacklog=50
Startup properties:
#SSLArguments=-Dweblogic.security.SSL.ignoreHostnameVerification\=false -Dweblogic.ReverseDNSAllowed\=false
RestartMax=2
RestartDelaySeconds=5
FileTimeSpan=24
RestartInterval=3600
FileTimeSpanFactor=3600000
RotatedFileCount=7
RotationType=bySize
#AdminURL=http\://192.168.0.224\:7001
NumberOfFilesLimited=true
AutoRestart=true
RotationTimeStart=00\:00
FileSizeKB=500
Regards,
András

To deploy your FMX you need AS 10.1.2 Forms installed, and then you can use AS control or Forms server configuration file.
For more information regarding FMX deployment, refer to http://download.oracle.com/docs/cd/B14099_19/web.1012/b14032/toc.htm
Regards,
Preet

NAC Server and NAC Manager installation

Hi experts,
When I've tried adding NAC Server to NAC Manager in CAM web management, it prompts: Failed to add server: Could not connect to 10.130.80.81
Is there anything I can do for solving this?
I'm new for NAC Manager and Server installation.
The version using is 4.8.2
BTW, I don't know how to generate SSL certificates (not temporarily) for installation, can anyone help also?
Thanks in advance!
Regards,
Daniel

Hi Daniel,
this is related to the certificate issue.
just generate temp certificate in NAM and NAS.
Export the certificate along with key and store it in different location.
then in SSL option there is trusted certificate authority
load NAS certificate in NAM and NAM certificate in NAS. then try to configure or add NAS to NAM.
it will work.

Repository after reinstall server and ovm manager

I have problem
I have one server connected FC to SAN storage. I have repo with vm on storage luns. After power crash i must to reinstall ovm on server and also reinstall ovm manager.
Now can i connect old reository to new/reinstall server witouth loosing any data?

Server with manager had hardware failure. Idont have backup so i have to install ovm manager on new machine.
Vm server have problem with file system, dont seen the luns also xend dont start. So i reinstall also this server.
I know that new ovm manager dont recognize old repository disk, so i create new lun on storage and create new repository on it. Now from CLI i map old ocfs repository and copy virtual disk and vm.cfg to new repository, but ovm manager dosn see any of them.

Need help with OSx server and profile manager

I messed up my OS X server and seems like it has stopped working.
I cannot access my server remotely or locally and it shows Safari cannot connect to server.
I made mistake resetting keychain to default and all certificates were missing.I restored system.keychain from time machine but not it won't run.
System log shows
ec 30 18:31:25 mdmserver.medicalpharmacies.com certadmin[14697]: BundleManager(non-plugin calling servermgr_certs): doCommand finished reply = {
     error = <62706c69 73743030 d4010203 04050625 26582476 65727369 6f6e5824 6f626a65 63747359 24617263 68697665 72542474 6f701200 0186a0a8 07081112 1a1b1c22 55246e75 6c6cd409 0a0b0c0d 0e0f1056 4e53436f 64655a4e 53557365 72496e66 6f584e53 446f6d61 696e5624 636c6173 7311138a 80038002 80075f10 19636f6d 2e617070 6c652e73 65727665 726d6772 5f636572 7473d313 140c1517 19574e53 2e6b6579 735a4e53 2e6f626a 65637473 a1168004 a1188005 80065f10 164e534c 6f63616c 697a6564 44657363 72697074 696f6e5f 1032556e 61626c65 20746f20 66696e64 20706173 73706872 61736520 666f7220 6578706f 72746564 20707269 76617465 206b6579 d21d1e1f 205a2463 6c617373 6e616d65 5824636c 61737365 735c4e53 44696374 696f6e61 7279a21f 21584e53 4f626a65 6374d21d 1e232457 4e534572 726f72a2 23215f10 0f4e534b 65796564 41726368 69766572 d1272854 726f6f74 80010008 0011001a 0023002d 00320037 00400046 004f0056 0061006a 00710074 00760078 007a0096 009d00a5 00b000b2 00b400b6 00b800ba 00d30108 010d0118 0121012e 0131013a 013f0147 014a015c 015f0164 00000000 00000201 00000000 00000029 00000000 00000000 00000000 00000166>;
     errorCode = 5002;
     errorDescription = "Unable to find passphrase for exported private key";
Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd[14695]): Service exited with abnormal code: 1
Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd): Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

Hi!
Do you have a time machine backup? What you can try to do is a full restore on a testmachine or a VM and export the old keychain and import it into your broken server:
Passwords:
http://www.icreatemagazine.com/tips/os-x-tutorial-how-to-transfer-keychain-data- between-macs/
Certs:
https://www.racf.bnl.gov/docs/howto/grid/osxcertmgmt
Good luck!

Problem Login to Weblogic Server and Enterprise Manager Page

Hi master and guru,
I have installed WebLogic 10.3.5, SOA 11.1.1.5.0 and OIM 11.1.1.5.0 in production server.
But when trying to login to Weblogic Server page (http:\\<host>:7001\console), failed without error.
And when trying to login to Enterprise Manager page (http:\\<host>:7001\em), failed also.
The error in log :
initIgnoreList:Register 'oracle_ias_farm' login page url:/em/faces/targetauth/emasLogin
<Oct 27, 2011 10:04:49 AM ICT> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
m_connection-jpss null
<Oct 27, 2011 10:05:09 AM ICT> <Error> <oracle.iam.platform.emmbeans.OIMDomainClusterMXBeanImpl> <BEA-000000> <Not able to fetch the OIMDB Info. Either the application is undeployed or the application server is shutdown. Hence populating the Information Not Available values for them>
<Oct 27, 2011 10:05:09 AM ICT> <Error> <oracle.iam.platform.emmbeans.OIMDomainClusterMXBeanImpl> <BEA-000000> <Not able to fetch the SOA Info. Either the application is undeployed or the application server is shutdown. Hence populating the Information Not Available values for them>
<Oct 27, 2011 10:05:09 AM ICT> <Error> <oracle.iam.platform.emmbeans.OIMDomainClusterMXBeanImpl> <BEA-000000> <Not able to fetch the OVD Info. Either the application is undeployed or the application server is shutdown. Hence populating the Information Not Available values for them>
<Oct 27, 2011 10:05:09 AM ICT> <Warning> <oracle.iam.platform.emmbeans.OIMDomainClusterMXBeanImpl> <BEA-000000> <Found multiple WLS Domain MBeans>
<Oct 27, 2011 10:05:14 AM ICT> <Warning> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <BEA-000000> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
java.lang.IllegalStateException: Cannot forward a response that is already committed
+     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:122)+
+     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)+
+     at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)+
+     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)+
+     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)+
+     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)+
+     at oracle.sysman.emSDK.adfext.ctlr.EMViewHandlerImpl.renderView(EMViewHandlerImpl.java:149)+
+     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:800)+
+     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)+
+     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)+
+     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)+
+     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)+
+     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)+
+     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)+
+     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:164)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)+
+     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)+
+     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:105)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)+
+     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)+
+     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)+
+     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)+
+     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)+
+     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)+
+     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)+
+     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)+
+     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)+
+     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)+
+     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)+
+     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)+
+     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)+
>
<Oct 27, 2011 10:05:14 AM ICT> <Error> <HTTP> <BEA-101020> <[ServletContext@333967374[app:em module:/em path:/em spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalStateException: Cannot forward a response that is already committed
+     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:122)+
+     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     Truncated. see log file for complete stacktrace+
>
<Oct 27, 2011 10:05:14 AM ICT> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'AdminServer' has triggered at Oct 27, 2011 10:05:14 AM ICT. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Oct 27, 2011 10:05:14 AM ICT SERVER = AdminServer MESSAGE = [ServletContext@333967374[app:em module:/em path:/em spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalStateException: Cannot forward a response that is already committed
+     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:122)+
+     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)+
+     at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)+
+     at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)+
+     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)+
+     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)+
+     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)+
+     at oracle.sysman.emSDK.adfext.ctlr.EMViewHandlerImpl.renderView(EMViewHandlerImpl.java:149)+
+     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:800)+
+     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)+
+     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)+
+     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)+
+     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)+
+     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)+
+     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)+
+     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:164)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)+
+     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)+
+     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)+
+     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:105)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)+
+     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)+
+     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)+
+     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)+
+     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)+
+     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)+
+     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)+
+     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)+
+     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)+
+     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)+
+     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)+
+     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)+
+     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)+
+     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)+
+     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)+
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = IDM_APP TXID = CONTEXTID = 3ca8d5161a516ac2:7fbc50ed:1334350f599:-8000-0000000000000083 TIMESTAMP = 1319684714138
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Oct 27, 2011 10:05:15 AM ICT> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\oracle\middleware\user_projects\domains\base_domain\servers\adminserver\adr\diag\ofm\base_domain\adminserver\incident\incdir_18 with a lockout minute period of 1.>
But the weird thing is success when login to SOA (http:\\<host>:8001\soa-infra)
Can anyone help me why this problem occured and how to solve it?
Thank you,
Ivan P.

Hi
Try to increase socket limits
Normally you can do this within the admin console , Servers -> Configuration -> Tuning -> Socket Readers
For you, since you can't login, set the ThreadPoolPercentSocketReaders in the config.xml to a higher value than 5
kind regards
Michel

Not able to install Oracle VM Server and VM Manager on the same PC?

Hi, I've installed Oracle VM Server an created a VM for Oracle VM Manager (from template). Now I want to use the Oracle VM Manager to create another VM from template. I've untared the template and stored it in /OVS/seed_pool. However, when I go to "Resources -> VirtualMachineTemplates -> Import" and try to "Select from Server Pool (Discover and register)", I cannot discover anything (there is no server pool to select)!!
I have one Server Pool containing one Oracle VM Server. Also one VM for the OracleVMManager.
I appreciate any advise.

HI,
make sure you have created one sub folder before start import.
Jignesh

SSL connection between Dist Auth UI Server and Access Manager

Hi,
I have a Dist Auth UI Server installed in Web Server 7 and working properly, but now i want to configure it to talk with Access Manager with a secure port.
I have configured Access Manager (also deployed in Web Server 7) in a secure port (443). I have requested and installed the server certificate in the Access Manager Web Server instance and also the root entity certificate.
My question is: how must i configure the UI Server to communicate with the Access Manager Server in a secure way and trust the certificate that the WS of the AM presents ?
Regards,

There have been a few reports of the same behaviour with other customers - specifically with the handling of the encoding of "+" characters to " ". It relates to how cookie encoding/decoding is performed (as you have already observed).
The solution for these customers was the following:
=> AM server/client side:
Ensure that com.iplanet.am.cookie.encode=false in AMConfig.properties and AMAgent.properties on all systems.
=> AM client (UWC) side:
- Set <property name="encodeCookies" value="false"/> in /var/opt/SUNWuwc/WEB-INF/sun-web.xml. This will prevent UWC from trying to urldecode the cookie it receives and therefore stops it turning the + into a space e.g.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-web-app PUBLIC '-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 Servlet 2.3//EN' 'file:///net/wajra.india.sun.com/export/share/dtd/sun-web-app_2_3-1.dtd'>
<sun-web-app>
   <property name="encodeCookies" value="false"/>
   <session-config>
      <session-manager/>
   </session-config>
   <jsp-config/>
<property name="allowLinking" value="true" />
</sun-web-app>Regards,
Shane.

10.4.7 Server and macintosh Manager

Just some info regarding being able to tranfer single users to Macintosh Manager from Workgroup Manager by simply dragging from MM to WM. I am able to do this on an eMac here at my school. The version of Macintosh Manager is 2.3 and the version of Workgroup Manager is 10.4.4. I tried this on other Macs, ie a PB, no luck. No idea why it only works on this eMac. My server is an xServe running OSX Sever 10.4.7. The eMac is runing OSX 10.4.7.
hope this is of help to those who still need to use MM.

I don't have access to a copy of the file, pre- 10.4.7,
but it should have the following content as of 10.4.7
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ProductBuildVersion</key>
<string>8J135</string>
<key>ProductCopyright</key>
<string>1983-2006 Apple Computer, Inc.</string>
<key>ProductName</key>
<string>Mac OS X</string>
<key>ProductUserVisibleVersion</key>
<string>10.4.7</string>
<key>ProductVersion</key>
<string>10.4.7</string>
</dict>
</plist>
And it should have the following permissions:
-rw-r--r-- 1 root wheel 497 Jun 22 22:44 /System/Library/CoreServices/SystemVersion.plist

ARES Installation with Forms, Wkf Server and Form Manager on JBOSS

Hi,
we are evaluating the product combination mentioned above. Is there any installation guide or a recommendation available? The german documentation includes only integration with Document Security. Is it sufficient to install it with the automatic Installation (on an own JBOSS)for testing purposes - will it be integrated in already installed LiveCycle products - especially ADMINUI? Is it possible to install it on the same JBOSS instance for production environment? Which kind would you recommend to use in general?
Thanks for any remarks
Jens Thieme

Take a look at this doc: http://partners.adobe.com/public/developer/en/livecycle/integrating_lc_products_5_0.pdf
If you're a member of the AEDP program you could also download and install the Developer Toolbox which has these products (plus LiveCycle Security) already installed and configured. You can find a link to it here: http://partners.adobe.com/public/developer/livecycle/toolbox/topic.html
Chris
Adobe Enterprise Developer Support

Integration SMP 3.0 and Inventory Manager 3.2 / 4.0

Hello,
I have a Little doubt. For an Implementation of Inventory Manager after I have installed/configured the SMP 3.0 or SMP 2.3, in order to actívate the Agentry for Inventory Manager, Do I have to install the Inventory manager server (Agentry Server) which I had downloaded with Inventory Manager Package from services marketplace? or Do I have to install Agentry server which came with SMP, and after that just configure the deployment package as application within the SMP? ... I'm a Little bit confused because I think these deployment files (bundle) are on the agentry server that came with the Inventory Manager package (that is why the question was raised) and if I do not install the Inventory Manager Server I wont be able to get this bundle. Another questions is: In case the inventory manager server must be installed in order to make the agentry / SMP integration work for this standard app, If after this implementation We want to develop /configure another agentry apps, Can I do this with the agentry server installed for Inventory Manager (Inventory Manager Server) and not the "generic" one that came with the SMP?
Please Help Manju Venkatesha Michael Appleby Steve Streeter Jason Latko
Best Regards,
Mariana

Hi Manju Venkatesha & Stephen Streeter
Let me see if I understood what you guys answered me on this post...
1.- The agentry server is built on SMP 3.0 & SMP 2.3 and the standalone server on SMP 2.3 is only configure for development. Now, I have a another question about this...
Q.- if I need to configure the agentry's development environment besides Inventory Manager Mobile App, Does the SMP 2.3 developer server need two agentry server (The one built within SMP and the standalone for development process)? or just standalone server? or just SMP Server with Agentry generic server built within?. I understood production environment only will have one... the "generic" agentry server... as Steven said "SMP 2.3 needs to be use for QA and production", but i have this question regarding development server.
2.- Manju, We can install either IM 3.2 or IM 4.0, the thing is we are reviewing what versión is better to implement So I need to clarify my doubts for implementation process on both versions. The steps you mentioned put me in context and gives me some lights about the process, now, when you wrote: "Download Inventory Manager from service marketplace (it comes exe file)", is this the mobile server called "Inventory Manager 3.2.0 Sever" for IM 3.2 / "SAP Inventory Manager 4.0.1 Deployment" for IM 4.0?. The confusion raised here because the wizard for the mobile server that comes with mobile application implementation package, it is almost the same of Agentry standalone server, besides the SAP Backend information, it's pretty much the same wizard. In fact I think it will create a file system directory similar to standalone agentry server... So, my question about this is:
Q.- If the answer to my previous question: Does the SMP 2.3 developer server need two agentry server (The one built within SMP and the standalone for development process)? , is yes… and as you remark on your steps I need to install this mobile server (exe file), Is this mean that I need to install three agentry server on the development server (generic, standalone, mobile server)?, What happen with the file system directory for the agentry standalone dev server and inventory manager mobile server? Do they will merge in one??? And if I need to modify the inventory manager mobile app: which agentry server will be my development environment?
The SMP 3.0 which has the agentry component integrated and does not need a standalone one will need the "mobile server", does it? (exe file within SAP Inventory Manager 4.0.1 Deployment I guess or Inventory Manager 3.2.0 Server) and what about if I need to customize something on IM 4.0? The changes will be publish directly to the agentry component within SMP 3.0?
Another thing, is the Inventory manager server (mobile server) will give me the jar file from which I can get the IM agentry project for Inventory manager mobile app customization?
I know I can be confusing on my questions but please help me understand
Thank you both for the information / help you could give me ...
Best Regards,
Mariana

What is the Ideal Production Setup For One Admin and 4 Managed Servers

Dear Experts
I will be starting with production setup including one Admin server and 4 managed servers in one single domain.
I am thinking of creating a single node environment(no clusters) as the machine has following configuration
OS : Windows Server 2008 R2 Datacenter
RAM : 48 GB
System Type : 64 bit
Processor : Intel(Xenon) 4 processors [email protected]
Can you please let me know if this configuration would suffice for the 4 managed servers if i assign Xmx and Xms as 4096 and Heap Space as 1024 to all the Managed Servers.
It is very urgent and i need to convey to the Infrastructure team if harware procurement is required.
We are looking at somewhere around 300 concurrent users(maximum load) and 100(minimum load) at a given point of time.
Please reply ASAP.
Thanks in advance
Edited by: Abhinav Mittal on Apr 23, 2013 7:58 PM
Edited by: Abhinav Mittal on Apr 23, 2013 8:03 PM

Heap size must be calculated according to the applications that are been deployed on each JVM.
With no deployments, you dont need more than 256k for managed servers heap size and 512k for adminserver. As biggest its your heap size, longer will take your garbage collection. And if you can prevent it, better do it.
Kinds,
Gabriel Abelha

Do VM Server and VM Manager two dedicated pc's??

Similar Messages

Maybe you are looking for