Do we actually need specification tab besides label tab  in material master

After designing template and all , the preview is not showing all the portion of the template .I have assigned material in the material assignment tab in specification workbench . When I was trying to print I use the same material and started the preview but it is not showing all ,only 1/5th of top portion is being displayed . I have not set up specification tab in material master

Dear M D
no clue waht you have done and what your problem might be, I can inly imagine. Therefore:
If you would like to print a label in GLM transaction you need a material; the material must be linked to a specifiacioin, the specification should hav e suitable genvar/language combination released and you need to have prepared LabelView. If oyu have done itr like that the "LabelDetermintation" can run.
Check:
What is a "Label" and how support SAP EHS Management "Labeling"
SAP EHS Management for Beginners
C.B.

Similar Messages

  • How is the Consumption tab will update in the material master?

    Hi Friends,
    How is the Consumption tab will update in the material master?
    what are the customization required if consumption tab wants update with respective the qty?
    Regards,
    Hari Shankar

    Hi Friends ,
    I am very thankful to u all for your quick response,
    I have tested the two materials with two movement types of 601 and 954.
    when i did the 601 movement type the consumption tab in the material master has updated automatically even though  i haven't maintained forecasting tab, but where as for the movement type 954 the consumption tab is not updated even though i have maintained forecasting tab view in the material master.
    Is the consumption view will update based on the Material movement types?
    where is the control parameter for updating consumption tab?
    could you pls help me regarding this?
    Regards,
    Hari Shankar.

  • Need info about Safety lead time in material master

    Hi,
    Safety lead time in material master is used to bring requirements forward.
    we define this time in terms of days.
    I tried to use this field, but system is not bringing the requirements forward.
    System is planning material as other raw materials.
    The requirement dates for raw materials without safety lead time and with safety lead time are same.
    Can anybody explain, how it works and how we can alalyze the results with example.
    Is there other settings we need to do ?
    Regards,
    Mahesh

    Hi James,
    Thanks for reply.
    I have defined safety lead time, in the MRP 2 view. But still, sytem is not bringing the requirements forward.
    Can you please tell me, is there any other setting I need to do ?
    Regards,
    Mahesh

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • How do i disable orientations for a specific view in my tab bar project without disabling for the other views?

    How do i disable orientations for a specific view in my tab bar project without disabling for the other views?
    Any suggestions?

    Note that you can also hide the tab bar completely with code in the userChrome.css file.
    Add code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #TabsToolbar { display: none !important; }
    </nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration

  • Tab Set Label Colors - How do I change the selected tab label color?

    No matter what color I tell it to use for the Labels - Selected color I get white.  Is this a known bug in the system or am I not doing something correct.  I have a tab set component and a label based menu selector component on my display.  I've set up the labels and backgrounds for both components exactly the same but I can only get white for the selected tab set label.
    Edited by: Maureen LaComb on Feb 19, 2009 5:38 PM

    Hi, Maureen
    You can set the color of Tab Set by using the Following Steps.
    --> Select the Tab Set
    --> From the the Properties Window
    --> Select Appearance
    --> There are Two Tabs "Text" and "Color"
    --> From the Color Tab you can Select the Background Color
    --> Tab BackGrounds Or Labels from here you can select the color.
    But this setting will Apply to all the Tabs in a Tab Set, I think you can't set the Specific Setting for a single Tab in a Tab Set.
    Please Reply if any Issue,
    Kind Regards,
    Faisal

  • Forms 6i - Highlight a tab page label (BOLD or coloring) in a tabbed canvas

    Hi Sir,
    I have an urgent requirement wherein I need to highlight a particular tab page header (label) either via
    1. Making the tab page label BOLD
    Or
    2. Coloring that particular tab page.
    OR
    some other way.
    Could anyone please help me on this.
    Regards,
    Kiran

    No version of Oracle Forms allows you change these properties of a tabbed canvas. If you were using Forms 10g or higher, you would be able to use the Oracle Forms Look and Feel Project which is a set of JavaBeans created by Francois Degrelle and enables you the change many of the properties that Forms won't let you change. Unfortunately, you are stuck with what is available in Forms 6i.
    Craig...

  • Is there anything in SWTOOLS that I actually need to keep?

    The SWTOOLS is taking up 3-4 Gigs -- and since I'm using a SSD (with relatively limited space) I'd like those 3-4 Gigs back.
    Is there anything I actually need in there? If I copy the SWTOOLS folder to a network share, and then delete it from my X220, is there anything wrong with that? Do I even need to copy it to a network share? Offhand, it seems like a bunch of stuff I could download later if I ever actually want it.
    Thanks!

    Hello,
    On some models of ThinkPad (older ones?), the C:\SWTOOLS directory may contain the standalone installation packages for licensed software that are not available for download, such as DVD viewing or burning software.  In addition to make a normal backup of it whereever your store your backups, I would suggest copying the contents of the directory to a 4GB USB flash drive and keeping it someplace near the ThinkPad, such as a carrying case or backpack if you use one.  That way, if you ever need to reinstall the operating system while away from your backups, you will have all of the additional ThinkPad-specific software available for reinstallation  with you from the USB flash drive.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • I need help with printing labels.  please

    I need help with printing labels.  thanks in advance

    Welcome to Apple Support Communities.
    In Address Book, first select a name or group of names to print.
    Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

  • I want to buy Apple TV for my grandchild so she can play videos and music from her Ipad on the family's big screen. Do I need anything else beside the Apple TV device. Also what is AirPlay? Is it an app, a service or a piece of hardware?

    I want to buy an Apple TV for my grandchild so she can play content from her Ipad on her family's big screen TV. She has cable WiFi in her home does she need anything else beside the Apple TV. Also what is AirPlay. Is it an app, a service or a seperate hardware from the Apple TV?

    Airplay is a wireless streaming protocol. It allows content to be pushed from the iPad through the Apple TV onto your connected HDTV.
    If she wants to see the iPad displayed on the big screen and/or play games that involves mirroring. As long as it's an iPad 2 (or later) then you will be fine. More info on both has been referened below
    http://support.apple.com/kb/HT4437?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/ht5209

  • I need specific directions on how to set up 2 iPads to same iTunes account.

    I need specific directions on how to set up 2 iPads to 1 iTune account.  I want both iPads to receive some things alike - calendar, contacts, etc.  I want same book on both but to open to correct page for each iPad reader.  Games on both but levels for each iPad user.

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
    It sounds as if you have already found the method to change your card details, but just to confirm: go to the iTunes Store. Click 'Account' under 'Quick links' at the right. Log in.
    Where it says 'Payment Information' click on 'Edit' to the right of it.
    You should then be able to enter the correct card details.
    Is this not working? Do you get an error message?

  • HT1449 How do I find out which file iTunes actually needs/uses?

    I have recently transferred my iTunes libary to an external hard drive (Migration Assistant didn't work, so I dragged and dropped the whole iTunes folder from my other, Windows, external hard drive straight to the new external hard drive, and added the other file that does playlists etc by e-mailing the library file to myself, and 'importing playlist' on the new mac... I still don't have ratings, but that's not a biggie). This is to use as a central library for all users. Works ok, both users face it, all ok... However, the total size of my music library is some 40gb, according to my old laptop and itunes on the new Mac... but on the external hard drive, there is now some 139gb of data (the only other stuff is about 80 pictures, so not much in data terms). This isn't a pressing need as the new external drive is 2tb, backing up to a 2tb Time Capsule, so still plenty of storage left for my wife to add her photos and her music.
    So how do I know what to delete? There's each album listed separately, and some old temp files (have deleted the latter), but I'm scared of deleting things I do actually need. I'm at work now, so can't give exact descriptions. Anyone have any clues?

    Have read up a bit more, and I think I've found a solution... my wife's music is very much smaller than mine, and I'd like to preserve the ratings on my collection. She's not bothered.
    So here's the plan: broadly following iTunes: How to move your music to a new computer, using external drive.
    1. delete the iTunes folder previously placed on the new, Mac ext HD (what will be the joint library). No media hopefully now on this machine.
    2. copy her iTunes folder from the old ext HD to the desktop of the new Mac. This was consolidated before copying to the ext HD. This will essentially become the backed-up 'previous content' to add back in later.
    3. Delete her iTunes folder from the old ext HD to avoid confusion.
    4. Copy my old laptop's iTunes folder to the old ext HD
    5. Drag the itunes folder from the old ext HD to the new mac ext HD, both showing on the desktop (which should preserve rating etc, right?)
    6. add back in the itunes folder on the desktop that I placed there earlier, using file> add to library in iTunes. (ratings not preserved)
    Both users iTunes are already instructed to face the new ext HD for their library.
    Will this work? Why is one set of ratings etc preserved but not the other?

  • Query Related to Addition Of Customer Specific Tab in Material Master

    Hi Experts,
    we had a requirement from our client to add certain specific fields in Material Master. we added all those fields in a "User Tab" created by copying "Basic Data Tab" & it's attributes in SPRO. After this was done the transaction was running fine but when we want to migrate to another tab say "Basic Data  Tab" we are not able to do so as we are still on the same User Tab.
    Please help me on this <removed by moderator>.
    <removed by moderator>
    Thanks & Regards
    Priyesh Shah
    Edited by: Thomas Zloch on Jun 29, 2011 11:06 PM - urgency reduced, please do not offer ...

    Thanks for your reply.
          I would like to know am using strategy 52 for this FG, so that i can have option to procure order specific components after sales order arrival, and components which are not specific to the order can be procured before sales order arrival. Where am confused is if am planning with FG1 i.e. am entering PIR for FG1 and am procuring order independent  components before sales order arrival and suppose if the sales order arrives for FG2 for which components i have procured before sales order arrival is same but the remaining components which are order specific are different from that of FG1, then how the MRP shall behave. How the requirement for the FG2 shall be met. Kindly throw some light on this scenario.
    Expecting a positive and prompt response.
    Regards,
    J K Tharwani

  • Programmatically change tab page label font size

    Hellow Fellow LabVIEW Lovers,
    I thought this subject was easy with LV2009, somehow I cannot find the property for the "tab page label font size", yes, i also looked with the "pages" ref array from the tab ref, also no luck. Could someone point me to the right place? I would really appreciate your help. Thanks.
    Bryan

    Odd,
    The each tab is a page  Class Generic>Page.
    This snippet shows that there are no objects on the page (like the lable)
    However ,Page Propertise do not include lable.font.all elements
    Page Properties
    Dim hasPlayer, playerversion
    hasPlayer = false
    playerversion = 10
    Do While playerversion > 0
    On Error Resume Next
    hasPlayer = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & playerversion)))
    If hasPlayer = true Then Exit Do
    playerversion = playerversion - 1
    Loop
    is_FlashVersion = playerversion
    is_Flash = hasPlayer
    Requires: Base Package
    Inherits from Generic. View the class hierarchy.
    Property
    Description
    Colors
    Gets or sets the foreground and background colors of a tab
    control page. Details
    Colors:BG Color
    Gets or sets the background color of the tab control page. Details
    Colors:FG Color
    Gets or sets the foreground color of the tab control page. Details
    Controls on Page[]
    Returns an array of references to the controls and indicators
    on a page. The order in which you place the objects on the page determines the
    index of the object in the array. For example, if the first object you place on
    the page is a numeric control, the index of the numeric control in the array
    returned by this property is 0. Details
    Decorations on Page[]
    Gets an array of references to all decorations on a tab
    control page. Details
    Description
    Gets or sets the description of a tab control page. Details
    Independent Label
    Makes the tab control page caption independent of the page
    label. Details
    Objects on Page[]
    Gets an array of references to all controls, indicators, and
    decorations on a page. Details
    Page Enabled State
    Gets or sets the state of a tab control page to enabled,
    disabled, or disabled and grayed. Details
    Page Label
    Gets the label of a tab control page. Details
    Page Visible
    Shows or hides individual pages of a tab control. Details
    Tab Caption
    Gets or sets the text of a caption on a tab control page. Details
    Tip Strip
    Gets or sets the tip strip of a tab control page. Details
    Moreover, I can select a tab lable on the FP, change its font and EACH tab lable changes to the SAME font and color. 
    Must be some serious MAGIC in the background similar to how NI made Latching Bools.
    Champions?
    Jeff

  • Why we need specification and body in Packages

    Hi all
    Why we need specification and body in packages
    is Package body is not enough?
    It is an interview question asked
    How can I explain
    regds

    1. Package specification is the interface.
    Package body is the implementation or detail code.
    If one has built a package, he/she just need to publishs
    the interface without a need to publish the detail implementation, so it will simplify to end user by hiding the detail.
    2. Using only a Package body is identical to make separate subroutine. One pkg body will need one subroutine, if there are 10 pkgs body there will be 10 individual subroutine. Using package will give simplicity to manage the code, and also give speed in execution.

Maybe you are looking for