Do we can set any scroll option in the query designer?

Hi,
I would like to know is there any setting for scroll option at the query designer level.
This is because if I look at some reports so I could see little ups and down (small up and down arrows) symbol at the column level, and is enabled for only few reports.
Need some input on the same.
Thanks

Hi
I think you are right clicking on KeyFigures Heading, instaed of that can you on any Keyfigure (example KF1 and KF2 etc..). once you done that you will see the following options.
EDIT     
COPY    CTRL + C
CUT       CTRL + X
PASTE   CTRL + V
DELETE   DEL
WHERE USED LIST
LEVEL DOWN         CTRL+ >
LEVEL UP     CTRL + <
PROPERTIES   ALT + ENTER
please select the highlighted options on the required key figures, then execute the query.
regards
Pavan

Similar Messages

  • How can i reuse a structure in the query designer in 3.5

    Hi all,
    we are using the version BW 3.5,  now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

    HI Richard,
    Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
    1) Structures
    2) Keyfigures
    3) Dimensions
    then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
    1) With Key figures
    2) Without Key Figures
    If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
    Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
    Regards
    ReddY A

  • I can't find the scroll option on the latest version upgrade in Adobe Reader.

    I can't find the scroll option on the latest version upgrade in Adobe Reader.  Can someone please help me find it or activate it?  I have the latest version X1 version 11.0.2.  Thank you

    I have never seen that (scroll bar disappearing); it should always be there if a document length exceeds the current view.
    What is your operating system?  Are these local or online documents?  If online, in what browser?
    P.S. this is how my Reader 11.0.2 on Windows 7 looks when I open any PDF document

  • I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

    I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

    Hi,
    ( I search for iChat questions when I have finished in the iChat Forum)
    So the menu bar reads iChat, File,  Edit,  View, Buddies, Video, Window and Help
    There is no Buddy List open.
    There is no other window for iChat open.
    In the iChat Menu you only have access to Status.
    Is an item ticked in the list ?
    Is this a green (Available item) or  Red ( an Away one) ?
    Can you access the Accounts option ?  (Sitll in the iChat Menu)
    Is anything in here ticked ?
    In the Window menu any Logged in account should appear in the list  (Between the Next Chat and File Transfer items)
    It would be useful to know which version of iChat this is.
    If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
    As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option  (you can use it in earlier OS versions if you want)
    Type in:-
    ~/Library/Preferences
    Find the file called com.apple.ichat.plist
    Drag it to the Trash and Restart iChat.
    This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
    9:23 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Off Set on a Select Option on the Query

    Hi Peolpe,
    How can i do to put a Off set on a select option on the query ?
    Thanks.

    Hello rafael,
    When you restrict any char. with a variable just right click on the variable, you will see the option on the contex menu.
    Sarhan.

  • HT5022 I'm trying to add a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version.  I've downloaded all available updates of the OS and the utility..  Help!

    I'm trying to add my HP wireless printer as a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version.  I've downloaded all available updates of the OS and the utility..  Help!

    Why would you need to ADD a new Client. Unless the APE sytem is completely different then any other Wireless router the printer should get an IP address from the router. That is IF the printer is setup to get an IP from the LAN DHCP server.
    Now you may want to make that IP it does get a Staticly assign IP address so it never changes, which will screw up printing if it does change. But i don't know if you can do that with APE routers.

  • How can I print from my MacBook Pro to Canon MP560 using rear tray?  I can't find that "option" in the print selection possibilities.

    How can I print from my MacBook Pro to Canon MP560 using rear tray?  I can't find that "option" in the print selection possibilities.

    Sure can.
    With a document open in Pages, select to print so that you can see the print dialog as shown below.
    Note that to see this view, you may need to press the Show Details button in the bottom left corner. In the image above, since I have the expanded view displayed, this button changes to Hide Details
    So with the view shown, first change the Presets menu to Default Settings. Then click the Layout drop menu and select Quality & Media. Make the changes you want and then click on the Presets menu and select Save Current Settings as Preset...
    At the next window, give the Preset a name and select the Only this Printer radio button and then click OK to save it. That's it.
    As for the Preset that you already have, if you no longer want this preset then you can delete it via the Show Presets menu pane that you've used already.

  • Comfortable in the usage and options available in the query designer/WAD.

    Dear  Friends
    can any body send me docs regarding Comfortable in the usage and options available in the query designer/WAD.
    Thanks & Regards
    Ramana

    Hi Friend,
    For WAD :
    [http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/content.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/9f/281a3c9c004866e10000000a11402f/content.htm]
    For Query Designer :
    [http://help.sap.com/saphelp_nw04s/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/605f1751-a701-2a10-b791-9da5ba4f2a64]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a81de5-a701-2a10-76bd-d8ec848cd326]
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/505e9d7e-0601-0010-3fa7-b40010bbdec5]
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
    Scroll down to Business Intelligence-> Bi suite Business Explorer-> Query Designer
    Hope this helps.
    Regards
    Hemant Khemani

  • Is there any way to get the query used in discoverer from backend??

    Hi All,
    I am new to dicoverer.
    Is there any way to get the query used in discoverer from backend??
    Thanks,
    Sachin

    Hi,
    you can view the SQL from within the discoverer menu:
    in desktop: View-> SQL Inspector
    in Plus: Tools-> Show SQL
    The SQL in the DB tables is encrypted so it's a problem getting it from there.
    You can export the workbook into SQL but it is not working for every worksheet (subquery, inline pivot tables...)
    you can create a batch file to export them all using the output of this script:
    select null,null,'echo off'
    from dual
    union all
    select distinct
    qs.qs_doc_name Workbook_name,
    qs.qs_doc_details Worksheet_Name,
    'start /wait <path>\dis51usr.exe /connect '||'&p_user_name'||'/'||'&p_password'||'@'||'&p_env'||' /apps_user /apps_responsibility "&responsibility" /opendb '||
    chr(34)||qs.qs_doc_name||chr(34)||' /sheet "'||qs.qs_doc_details||'"'||' /export SQL "C:\Export Discoverer SQL\'||qs.qs_doc_name||'-'||qs.qs_doc_details||'.sql" /batch'
    from eul_us.eul5_qpp_stats qs
    where qs.qs_doc_name is not null
    --order by 1,2
    union all
    select null,null,'echo off'
    from dual
    union all
    select null,null,'exit'
    from dual

  • How can i register column with in the query

    hi all
    how can i register column with in the query?

    Thanks.
    In my business one, the column width was registed.
    But I don't know how can I do it.
    So I try to save the query again after change column width.
    Then the query was opend with changed column width.
    Is it right function?
    Is there any way to register the column width?
    It's very troublesome to change column width every time.
    seiichi

  • Can we perform restriction on attribute in query designer?

    Hi
    can we perform restriction on attribute in query designer? My scenario is to restrict on an attribute..Could any one help me out i this issue?
    Regards,
    Suman

    Hi,
    Restriction can be done only for navigational attribute.U cannot do restriction for display attirbute.
    if it is a display attribute u want to restrict -make it navigational for that infoobject.
    Also the attribute must be 'checked on' as navigational in the infoprovider as well on which the query is built.
    hope it helps.
    Regards,
    Rathy

  • How can i pass a parameter to the query to filter the result of this lookup

    Hello,
    i'm developping a web application with JDeveloper 10.1.2 and JHeadStart.
    i realy need to know how can i filter the lookup (LOV) query result.
    in other word, when i click on the lookup, it show all the row that exist in may data base table.
    what i want is how can i pass a parameter to the query to filter the result of this lookup ?
    Thank you

    Hi,
    have a look if this helps
    http://oracle.com/technology/products/jdev/tips/fnimphius/restrictlovlist/restrictlov.html
    Frank

  • How can I make the Smooth Scrolling option in the Advanced menu apply ONLY to the tab bar?

    So, I'm one of those people who usually have 60+ tabs open at any given time. I'm also on a Lenovo laptop with a trackpoint (that may be relevant later).
    Right now, I have smooth scrolling disabled.
    In previous versions of Firefox, if I sat my cursor on the tab bar and scrolled either up or down, it would scroll across my tab bar at a constant, quick rate, usually taking about two or three seconds to reach the end. This wasn't an animated scroll (I've disabled that animated scroll via about:config in the current Firefox version).
    However, now, it's doing something different. There's acceleration to the scroll. If I just tap the scroll in either direction, it scrolls only a few tabs. However, if I hold the scroll for a second, it instantaneously takes me to the far end of the tab bar, completely skipping at least thirty tabs in between.
    I have tab scroll buttons added by Tab Mix Plus (smooth scrolling is also not enabled in that addon), and the same accelerating behavior occurs there. One or two taps of the button moves the bar a few tabs to the left or right, but several taps in quick succession takes me all the way to the far end of the bar.
    I can restore the old scrolling behavior for the tab bar by turning on smooth scrolling in the Options > Advanced menu, but that turns on smooth scrolling for web pages at the same time. I don't like the web page smooth scrolling, and would rather not have it on.
    Or if there's any other way to make it so that scrolling the tab bar moves the tab bar a fixed amount no matter what, that would be great.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Can set any IP on ACS 4.0 SE - accept the one I need

    We are trying to upgrade from an ACS 3.2 for Windows server to our new ACS 4.0 SE box. We have upgraded the Windows box to 4.0, backed up the configuration and restored it to the new box. We have pointed a couple of clients to the new box for testing, and can authenticate. So far so good, but when we went to the final step, assigning the IP address of the old server to the new box, we had a problem ? the ACS SE box will not let us assign the address to the local NIC ? I get an message that the configuration could not be assigned to the NIC.
    To go into detail on what was done:
    The Windows server was changed from x.x.3.45 to x.x.0.45 (we use a 255.255.248.0 subnet mask), and rebooted.
    On the ACS SE box, I used set IP to change the IP from x.x.0.20 (used for testing and setting up the configuration) to x.x.3.45. The system would not complete this step - This is when The system indicated that the configuration could not be applied to the NIC.
    I then set the NIC to DHCP, which was success fully applied. I then set the NIC to x.x.3.46, which it also accepted. At this point I thought it may be doing DNS lookup, and seeing another host name for the IP, so I deleted the PTR record for x.x.3.45, and tried setting that as the IP again. I got the same response.
    I thought it for some reason could be detecting an IP conflict, so I tried setting the IP to an address I knew was in use. As I expected, this did not work, but the error did say IP conflict ? and I was not getting that error on x.x.3.45.
    At this point I moved the connection on the ACS to the other Ethernet interface, but that did not improve the issue.
    I tried performing a reboot on the ACS box, but still could not set the desired IP address. At this point what I thought would be a 5 minute outage for VPN authentication had lasted 45 minutes, and I had to put the target address back on the Windows ACS server.
    Any idea what is causing this? I can set the IP address of the ACS SE to any IP accept for the one that I need! Since we have 70+ Cisco devices that point to x.x.3.45 for authentication, we really do not want to change the address of our ACS.

    You need to open a TAC case with Cisco for this.
    If I recalled this correctly, the old IP
    address is save into a registry file and when
    you backup the configuration, that registry
    containing the old IP address will be in there.
    When you restored the configuration, it will
    restore the old IP address along with it.
    Cisco TAC can help you modified the registry
    to fix this problem.
    You do not have this problem when you run
    Freeware TACACS+. You can change the IP of
    the box at anytime and not breaking anything.
    David
    CCIE Security

  • I can no longer scroll downward using the scroll ball.

    For no reason I can identify, all of a sudden I have lost the capability to scroll in a downward direction when using the Scroll Ball (or whatever the thing is called). I can still scroll upward. I have set Systems Preferences >Keyboard and Mouse >Mouse Preferences >Scrolling Options to Vertical Only. The Scroll Ball is set to Off. I have restarted the computer after changing the preferences to no avail.
    The same thing happens no matter what option I select in the Scrolling Options window, e.g., Vertical and Horizontal, Vertical Only, 360 Degree, etc. I can scroll upward only, not downward.
    I can scroll both upward and downward using the Up and Down arrows on the keyboard, but only upward using the Scroll Ball. I can scroll in both directions when I put the cursor on the sliding bar at the side of the window, and when I click on the up or down arrows in the side bar.
    How do I set up to restore the capability to scroll both upward and downward using the Scroll Ball?

    Hi there, a common problem with Apple's Mighty Mouse, some solutions...
    http://discussions.apple.com/thread.jspa?threadID=2249247&tstart=120
    http://www.macosxhints.com/article.php?story=20060210115417864

Maybe you are looking for

  • Importing Avid MXF Files to short in Premiere CC

    Hi there, We are importing AVID Media Files MXF from MXF Folder into Premiere Pro CC 2014 and the longer clips are to short. All the long clips ends at 4min. 55 sec. We were exporting the Files from AVID 8.3.0 as AFF, then importing in Premiere CC 20

  • Problem viewing videos with 5th Gen 30 GB Video

    My iPod video is older, got it back in 2005. It used to play videos just fine, but now when I try to play something, it jams up. Just a black screen with a play indicator and a battery indicator, but no movie. You can't menu back and have to soft res

  • SD Payment card deletion in Sales order (Standard fucntion?)

    Hi all, I have this below scenario regarding updating of Payment Card in a sales document (Header level) Requirement is to need to be able to add/delete a payment card when an cusotmer does it online. An customized RFC(Z_RFC_1)is called form the oute

  • I can't access some of my songs on iTunes with my Sonos wireless player.

    I can't access some of my songs on iTunes with my Sonos wireless player.  Sonos help says this is due to propriatary rules from iTunes that were eliminated after 2009 and there may be some upgrade possible, but iTunes is singularly unhelpful finding

  • IDOC-Orders05 extension for Inbound process

    Hi experts, Here am struggling with one IDOC requirement,the requirement is Updating the data for the three fields in VBKD through inbound idoc. since those fields are standard fields that is missing in the segment of standard IDOC-Orders05,so here a