Do we can use Inter-as vpnv4/6 multipath with Option C ?

Hello,
I'm configuring the inter-as vpn with multipath. Reading documentation I understood the only method to do it is to change configuration on ASBR disabling rt-filter and set maximum path under vpnv4. So if I correctly understood we can use multipath only with option B inter-as.
Correct ?
Do you know if this is possible using option C (eBGP w RR)?
Thanks
Isacco

Hi Issaco,
Just few days ago I have tested option-B and option-C on GNS. I am attaching that document here which might be useful to you.
Hope this helps.
Regards # Mahesh

Similar Messages

HT204053 I want to play newly purchased music but cant, i get the message "You can use iTunes Match on this computer with just one Apple ID every 90 days. (mobileme family pack is the problem i think)

I purchase a new album on my phone but then cannot download it to my laptop - I get the message:
"You can use iTunes Match on this computer with just one Apple ID every 90 days. All I can think is that the problem stems from purchasing a mobileme family & some of the music being my daughters. (she is 9 & I need to be ble to listen to more than Katy Perry & Justin Bieber) Please help! :-(

Welcome to the Apple Community.
Youll get that message when you change the iTunes account you are logged into, you can't keep changing it.

You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 5 days.

I only have 1 Apple ID. I turned off iTunes Match on my iMac, and now I cannot turn it back on. I get this error when I try to just turn iTunes Match back on, on the same computer, with the same Apple ID that I used orginially to subscribe to iTunes Match:
This computer is already associated with an Apple ID.
You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 5 days.
I checked for iTunes updates. None are available since I am using the latest.
I stopped/started iTunes. I rebooted the iMac.
NOTHING HELPS!!!!!!!!
I have a Mac Mini and I use the same Apple ID on iTunes there. I was able to turn iTunes Match off and back on with no trouble at all but my iMac refuses to allow me to turn on iTunes Match.
Now what do I do?

Unless you really only have one AppleID that you use with the iTunes Store there's really nothing you can do. In the case of having only one AppleID you should contact iTunes Store support, since that would be a server-side problem.

HT4913 iTunes Match:You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 85 days. What can I do?

I'm subscribed to iTunes Match but when I turn it on I get this message:You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 85 days. What can I do?

I had this happen back in December/January. I sold my MBP that I used to subscribe to iTunes Match back in December. In January, I bought a used MB and tried to use iTunes Match on it. I was told I had to wait nearly two months to use it on the new computer. I waited and was finally able to use it in the new computer.\
Sadly, this has more to do with the content providers (Record lables / movie studios) than it has to do with Apple impsoing the restrictions.

Latest operating system that I can use on a Power Mac G5 with CPU type Power PC 970 (2.2)

What is the latest operating system that I can use on a Power Mac G5 with CPU type Power PC 970 (2.2). This is not an intel chip. Thank you.

10.5.8 without Classic, or 10.4.11 with Classic.

HT4913 how to remove this ? You can use iTunes Match on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 85 days.

hello i ad my girlfriend profile and her itune library on my macbook and now i have this warning in my l itunes library, how can i resolve the problem ?
You can use iTunes Match on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 85 days.

If a computer has been associated with a device (as well as iTunes Matct, it can become associated via automatic downloads or re-downloading past purchases) then you will either need to wait until the 90 days have completed : http://support.apple.com/kb/HT4627
Or you can try contacting iTunes Support and see if they can remove the association : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

You can use iTunes Match on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 86 days. What do I do?

You can use iTunes Match on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 86 days. What do I do?

Unless you really only have one AppleID that you use with the iTunes Store there's really nothing you can do. In the case of having only one AppleID you should contact iTunes Store support, since that would be a server-side problem.

Can anyone help me figure out if i can use my droid to get online with lapdown ?

I am having a very hard time with a certain problem. i am trying to cut cost at home and would like to get rid of my internet service with cable co. i am under the impression that i can use my droid to connect laptop to use online. can anyone please help me step by step with this if it is possible? please email me... thanks, kathryn

what do you think of this...
The FCC orders Verizon Wireless to pay
$1.25 million as settlement to the Treasury. This is just a parcel of the
carrierâ€™s $6.9 billion
revenue
it has gained from the mobile market in the second quarter of this year. The
company is also ordered to notify Google that the objection to the tethering
apps from the Play Store is now off. This means that when new tethering apps
become available in the app store, everyone would be able to download and use
them without additional fees even if they are Verizon
customers.
Verizon will, of course, continue to
charge its customers with their overall data use every month so for those who
have capped data will not be able to enjoy tethering functionality but the ones
with unlimited data plans are the luckiest. The FCCâ€™s ruling made everybody a
winner; consumers under the network would be able to share their connection, app
developers donâ€™t fear of being blocked when releasing tethering apps, and
Verizon can attract more customers to subscribe to their unlimited
plan.
Read more at http://thedroidguy.com/2012/08/fcc-mandates-verizon-to-allow-tethering-apps-on-android-smartphones/#4ea8gkhCZMf0ypQ5.99

I have 3 iphone with same apple id, is it possibele i can use whatsapp in these 3 phone with same apple id

i have 3 iphone with same apple id, is it possibele i can use whatsapp in all the three phone with same apple id

Whatsapp uses your mobile phone number, not your Apple ID. So you can use it on 3 phones, but each phone will be a different "person" on whatsapp's network.

How to connect A extreme to A express in WDS so i can use A express as LAN port with RJ 45. A express is old and does allow WDS, but A extreme is n technology and doesnt allow wds anywhere in configuration. do i hvae to buy a new A extreme or new A expr

I have an airport extreme 4th generation (n) and airport express i think model 1084, which is not n technology. I want to connect the express to extreme base station wirelessly and then use the port on express to connect a non wireless PC or TV to the internet. I do not want to run a wire from base station to the computer and wanna use express's ethernet port as LAN port. I understand this can be done in wds mode, but my extreme (n) does not allow anywhere to set up a wds under the airport utility.
do i need to buy a new express or a new extreme? If i buy a new extreme can i connect the new extreme to old extreme base station without a wire and then use the LAN ports on the new extreme to connect to a computer or tv using rj45.
thanks

but my extreme (n) does not allow anywhere to set up a wds under the airport utility.
Suggest that you download and install the more functional and useful AirPort Utility 5.6 for Mac OS X Lion , which can be used to administer both the older "g" and newer "n" devices.
Open AirPort Utility 5.6
Select the AirPort that you want to administer
Click Manual Setup
Click the Wireless tab below the icons
Hold down the option key on your Mac while you click on the Wireless Mode selection box and the WDS setting will appear so that you can make further adjustments as needed.

You can use iTunes Match on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 90 days.

We each have an iPhone and separate Apple ids. When we bought our iMac we were advised to set up two user accounts to keep ids separate. Now we can only have one id associated with the Mac in any 90 days. What is the point of having separate accounts if we are not able to use them fully?
I find this very frustrating since my husband has recently downloaded his recent purchases, I now have to wait 90 days before I can access download any of my future purchases. We paid a lot of money for the iMac and I feel very let down, conned even. The reason we went for Apple was that we were assured that "it just worked", well not anymore!
Does anyone else feel this and what can we do about it?

Unless you really only have one AppleID that you use with the iTunes Store there's really nothing you can do. In the case of having only one AppleID you should contact iTunes Store support, since that would be a server-side problem.

How can I assign a period (instead of B) in Keynote for blank screen so I can use a Logitech R800 presenter? An option in next version?

I have recently bought a Logitech R800 presenter which works very well with Keynote on a MacBook Pro. The start/stop presentation key does not work but that can be easily fixed by assigning F5 to "Start presentation" for Keynote in the keyboard system preferences. The remaining issue is that the blank screen button sends a period (".") which works as a prompt for a blank screen in PowerPoint, but in Keynote it causes the slideshow to end. Keynote uses the letter "B" for blank screen.
How can I assign a period (instead of B) in Keynote for blank screen? Some sort of work around would be very useful as I often use blank screen in my presentations and much prefer Keynote to PowerPoint.
Perhaps it will be an option in next version of Keynote?
Thanks

As far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them.

What's a good voice recording app I can use on my laptop and interface with iTunes?

Does anyone have a great recommendation for making home-made voice recordings that I can post on social media using iTunes? Is there a particular app/recorder that makes it sound more professional than a home-made job?
Thanks.

You can't plug a microphone directly into a Mac: you have to go through a mixer or a preamplifier to bring the voltage level up to the Mac's input level. Of course this doesn't apply to USB microphones, which can be plugged into a USB socket and will usually work straight off. The Mac's own microphone may be reasonable sounding - you can try and see what it sounds like - but obviously you musn't touch the Mac while recording and you will get better results with a decent external mic. (USB would probably be best, but they're not cheap.)

How can use Print and Page Setup Dialogs with multiple monitors?

It seems the designers of the printing API forgot to include multiple monitor support.
According to the API, a way to popup a print dialog is done via this manner;
1) PrinterJob.getPrinterJob().printDialog()
or
2)PrinterJob.getPrinterJob().printDialog(PrintRequestAttributeSet atts)
Option (1) brings up the native print dialog and hangs the event thread (another problem, for later i guess) and (2) brings up the Swing dialog which at least doesn't hang the event thread. And while somewhat limited is not a bad print dialog.
The problem is that there is no way to pass a GraphicsConfiguration object, so that the print dialog can know where to popup (what monitor).
So looking around, we have this newer 1.4 method
http://java.sun.com/j2se/1.4/docs/api/javax/print/ServiceUI.html
public static PrintService printDialog(GraphicsConfiguration gc,
int x,
int y,
PrintService[] services,
PrintService defaultService,
DocFlavor flavor,
PrintRequestAttributeSet attributes) throws HeadlessException
So now this method has a way to pass a graphicsconfiguration, so it should know what monitor to create the dialog in.
But this method is such a mess to setup. When I use it, it lists the printers but doesn't select the user's default printer.
But more problematecally is that there is no PAGE SETUP dialog equivalent to this method! So I would have a print dialog that pops up in the right place, but page setup on default monitor! ARGH!!!
The code for ServiceUI has a pageDialog() method but it's commented out for "future release". What a mess.
Is there any way to solve this? To have pageDialog and printDialog on a given monitor?

It seems the designers of the printing API forgot to include multiple monitor support.
According to the API, a way to popup a print dialog is done via this manner;
1) PrinterJob.getPrinterJob().printDialog()
or
2)PrinterJob.getPrinterJob().printDialog(PrintRequestAttributeSet atts)
Option (1) brings up the native print dialog and hangs the event thread (another problem, for later i guess) and (2) brings up the Swing dialog which at least doesn't hang the event thread. And while somewhat limited is not a bad print dialog.
The problem is that there is no way to pass a GraphicsConfiguration object, so that the print dialog can know where to popup (what monitor).
So looking around, we have this newer 1.4 method
http://java.sun.com/j2se/1.4/docs/api/javax/print/ServiceUI.html
public static PrintService printDialog(GraphicsConfiguration gc,
int x,
int y,
PrintService[] services,
PrintService defaultService,
DocFlavor flavor,
PrintRequestAttributeSet attributes) throws HeadlessException
So now this method has a way to pass a graphicsconfiguration, so it should know what monitor to create the dialog in.
But this method is such a mess to setup. When I use it, it lists the printers but doesn't select the user's default printer.
But more problematecally is that there is no PAGE SETUP dialog equivalent to this method! So I would have a print dialog that pops up in the right place, but page setup on default monitor! ARGH!!!
The code for ServiceUI has a pageDialog() method but it's commented out for "future release". What a mess.
Is there any way to solve this? To have pageDialog and printDialog on a given monitor?

I have an iPad 3 and Apple TV 3rd gen - all software up to date. I can use airplay but there is no mirroring option available from the iPad 3. Why?

I have been able to get Airplay to work with my iPad 3 and 3rd Generation iPad TV, however there is no mirroring option when I hit the airplay icon - hence I can get audio, but no video.
iPad software: iOS 5.1.1
Apple TV software: 5.0.2 (4250)
Any thoughts as to what's going wrong?

Are you enabling Airplay mirroring properly?
Double click the Home button, scroll to the leftmost screen and under Airplay look to turn mirroring On.
AC

Do we can use Inter-as vpnv4/6 multipath with Option C ?

Similar Messages

Maybe you are looking for