Do we have a project section in that forum

Hi All
Would it be possible to have a project section in that forum on which we can share our experiences on the project we took part?
I would really appreciate to have that section in order to share our knowledge and avoid some mistakes/decision that have stopped or made the projects much more difficult.
Do we have that section? if not would it be possible to open that section?

Hi jkestely
Thanks for your help, I will then create an account on the Wiki.oracle.com.

Similar Messages

I have a project in FCP that is a 2:1 aspect ratio. When I send to compressor to author a DVD I lose the aspect ratio and the image fills the 16x9 frame. How do I preserve the original ratio thru compressor?

Aspect ratio lost in compressor

Hi Tom, thanks so much for answering. I totally get the need to letterbox but my issue is, how do I get the best quality in letterbox format?
Should I export it thru QT Conversion or just Export to Quicktime Movie? I exported as a self contained movie to keep the quality but when I send it thru the MPEG-2 compressor for DVD it fills the 16x9 frame without letterbox.
How would I modify the MPEG-2 preset to give me the letterbox in the MPEG-2?
I've been playing around but haven't hit the jackpot yet.
If there's any info you have, it would be greatly appreciated.
Thanks so much
James

I have several projects in Aperture that have lost their masters and cannot be printed, moved, adjusted or otherwise use. Is there a way to at least print them?

Is there a way to at least print them?

If you have truly lost the masters and have no possibility of finding them you can drag the previews out of the Aperture browser. Depending on how you have your preview settings you should get decent images.

I have a project that won't let me see my photos

If any one can help me, I have a project in aperture, that says that I have 638 photos in it, but i don't see any of them displayed. If I use the filter and ask to see ALL my photos, I can see most of them, but not if i select the project. Any one knows how did I screwed that one?

Click into the project (you will see no photos), and check to see if you text entered in the Search/filter for the project.
If so, delete it, and the photos will be back.
I had the same thing last week, and was scratching my head for ages, until I realised that I have typed something into the filter/spotlight search box by mistake.
I hope this helps,
Paul

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

HT202853 I have many project made in move HD that are not updating to the new iMovie 10 on my new iMac. Why is this not working as stated? How do I get my projects back from backup after old iMac crashed?

I have many projects made in imovie HD that are not updating to iMovie 10 on my new iMac. Why is this not working as stated on the article HT202853? How do I get my projects back from backup after old iMac crashed?

According to:
Update projects and events from previous versions of iMovie in iMovie (2014) - Apple Support
you can update from iMovie versions 7, 8 and 9, but iMovie HD is iMovie 6.
Maybe you can update in two steps, first from iMovie 6 to iMovie 7, 8 or 9 then to iMovie 10.
Geoff.

Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support. Have tried reinstalling

final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed. Have tried reinstalling, default settings etc
Appreciate suggestion, working on deadline. Thanks.

Here is the start of the crash report:
Process:         Final Cut Pro [20568]
Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCut
Version:         10.0.1 (185673)
Build Info:      ProEditor-185670300~1
App Item ID:     424389933
App External ID: 4138831
Code Type:       X86-64 (Native)
Parent Process: launchd [102]
Date/Time:       2011-11-11 20:41:32.201 -0800
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          192058 sec
Crashes Since Last Report:           14
Per-App Interval Since Last Report: 157161 sec
Per-App Crashes Since Last Report:   14
Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
VM Regions Near 0x280000003:
    CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM
-->
    STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL stack guard for thread 0
Application Specific Information:
objc[20568]: garbage collection is OFF

RoboHelp Starter - Recent Projects Section

Is there a way to delete/remove projects from the Recent Projects section?

Hi there
Have you tried Right-Clicking?
Personally I never use the Starter. Instead, I simply avoid that layer and open the desired application directly.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Want To Have Flash Project Open In New Browser Window

Hi,
My project outputs and plays perfect to Flash (let default to
Flash 7) but when viewing it (via a link from a web page) it opens
in a "next" window and at the end, if you use the X (EXIT) button
from the player control bar it wants to close the browser window
and does not take you back to the webpage (where I have the link to
play). I cannot seem to find an option in the Preferences or during
output to make the player open in a "new" browser window. Is it
possible there is a browser setting for this instead of setting in
Captivate? (IE 6 or 7) Thanks for any help/suggestions!

Hi leh1, and welcome to the User Community for Captivate!
The window in which any content plays is determined by the
code contained for the link,
in the web-page from which it is launched. In a nutshell,
you add these parameters to the link when it is created in the
"Parent" window.
Below is a snippet from a Menu Builder project in which the
links to "Project1" and "Project2" are set to open in a "New"
window, without chrome (note the many "
=no" following an equal sign), at a size of 720 pixels by
540 pixels ... the snip below shows a link to "Project1.htm", a
document containing a Captivate movie. I have bolded the specific
entries that control the type window ("OpenCustomLink") and the
size of that window ("width=720,height=540"):
<P style="cursor: pointer; cursor: hand; position:
absolute; left: 90px; top: 149px; text-decoration: none; font:
normal 18pt Arial; color: #000000" title="Project 1" onclick="
OpenCustomLink('project1.htm', '_blank',
'scrollbars=no,status=no,
titlebar=yes,toolbar=no,menubar=no,location=no,resizable=yes,
fullscreen=no,
width=720,height=540'); "
onmouseover="this.style.color='#0000FF'; "
onmouseout="this.style.color='#000000';">Project 1</P>
(some spaces inserted to avoid horizontal scroll)
All of which is to say, the target window is controlled from
the link in the parent document. I wouldn't suggest you just
copy-paste the above code, as I took liberties with it. I
would suggest that you can do this yourself with your own
HTML editor (Dreamweaver, etc.), or even better, get your local
web-guru to do it for you.
All the best!!
.

Can I have two projects open on Premiere Elements at the same time? (Elements 13 for Windows)

Hi there.
Can I have two projects open on Premiere Elements at the same time?
The reason I wanna do this is because I've trimmed many hours of clips in one project (One timeline) and I want to start a new project where I have a "clean" timeline and can add clips from the
first project (Cut and paste). Or how do I bring a trimmed clip from one project into another in a easy way?
Thanks
-Dan-

Your question is in the Photoshop Elements forum. There is another forum for Premier Elements and this will probably be moved.
That said, the answer is that Premier Elements has not be designed with the ability to cut and paste from one project to another. The only "work around" is to "Publish&Share" to a best quality format that matches your project settings. You can control the output clips with the "work area bars". You can then add the new clip to the second project. The output rendering process can, at least in theory, reduce the picture quality. Depending on formats, settings and footage, it may not be noticeable.
There is a third party product called Clipmate that some say works, but not always with good results.

I was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project

i was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project?? PLEASE HELP!!!

iMovie on your Mac has nothing to do with iCloud storage. Download and use Find Any File to search for your iMovie project. FAF can search areas that Spotlight can't, like invisible folders, packages and system folders. If there a file with your file name on it anywhere on the hard drive FAF will find it.
Do you have Time Machine enabled backing up to an external HD? This situation is exactly what TM is good at. It makes hourly backups so you can go back to find and restore the missing file. All HDs crash at some time or another and having a good backup strategy is the only protection against that.

I have a 7 minute MP3 that I want to edit, however when I drag it into garageband it only pulls in the first 3:30. Any thoughts on why?

I have a 7 minute MP3 that I want to edit, however when I drag it into garageband it only pulls in the first 3:30. Any thoughts on why? At the 3:30 mark in the song there is a pause but then it starts back up but for some reason the program won't pull in the part of the song beyond the pause. Thanks!

Hello npatel1207,
You may need to increase the duration of the project.
GarageBand '11: Set the project length
http://support.apple.com/kb/PH1832
Cheers,
Allen

I have existing projects made in iMovie and now I can't play them or edit them... any idea what's going on? Thank you

I have existing projects made in iMovie and now I can't play them or edit them... any idea what's going on? P/s M preview window is totally blank. I can't figure out what went wrong. Thank you

For iMovie to see your projects, they must be in a certain place. If they are on your startup internal hard drive, they must be in the Movies/iMovie Projects/ folder. If they are on an external drive, they must be in the iMovie Projects/ folder at the top level of the drive. Is it possible that your projects have been moves somewhere else?

After project build, code that opened a sub VI no longer works

I have a project that I am ready to build into a .exe.
I have code in the main VI that opens and runs another VI when an operator clicks on a button. When the operator is done manipulating the popup vi, he closes it and continues working in the main VI. He opens this popup VI often. The code that opens this popup vi is shown in a .jpg file attached. Obviously, if the project is built into a .exe, this code will no longer work (even if I still have the "PID Popup.vi" file in the correct location.
What is the proper method of opening a "popup" vi from a "main vi" that will still work when I build a project?
Hopefully that made sense!
Michael
Michael Hampson
President
XL Automation, Inc.
Attachments:
Popup.jpg ‏329 KB

simple question, did you retain the pop-up's front panel in the build? My guess is that you have not, and that you are getting an error when you invoke it, but since the errors are not handled you would not know that.
Just a guess and my $.02
Of course reflecting about 20 more seconds, you would not need to include it in the build. But remember, if you are calling other VIs that are in the build, it is a possibility of getting a compile error as you are running in the RTE and not the development environment. I would wire the error terminals and output that error cluster and look there.
Message Edited by Stradis on 05-30-2007 12:27 PM
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Do we have a project section in that forum

Similar Messages

Maybe you are looking for