Do we have a way to see the diffence b/n running & start-up config in FM GUI

Hello
Do we have a way to see the diffence between running & start-up config in FM GUI similar to show running-config difference in CLI. I understand that when activating the zoneset the differneces are shown, however if there are other changes made how can the difference b/n ru & start be viewed in GUI (FM)
Please advise
Thanks
Chetan               

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

  • My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address. Is there a way to see the IP address of my Mac through iCloud?

    My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address for the police to go and claim it. Is there a way to see the IP address of my Mac through iCloud? I've tried to get the IP address through Gmail and Dropbox but no success. Is there any software that updates automatically that I could find the IP address through?

    Shouldn't the IP address be on the box you bought the machine in? If you have the box, take it to the police as evidence that it's your machine. If I were you, I would set the firmware password when you get it back, but make sure you have the password written down in a safe place. If you forget it, there's only two ways to reset it. Either pay $400+ for the tool that can do it, or pay almost nothing for Apple to do it, I think it depends on where you live. The firmware password is this encrypted password and it can't be hacked either. The password prevents anyone from booting the machine into recovery mode, thus preventing them from restoring the computer to factory settings or performing any other functions. It's not stored in the hard drive so replacing that will be of no use either.
    I hope you get your Mac back and I hope this was helpful!

  • Is there a way to see the waveform of the audio in the primary video track?

    Is there a way to see the audio waveform of the audio in the video (primary) track?
    Scrubbing to determine precise edit points is useful, but seeing the dialog audio waveform would be much better.
    You can see the audio waveform in additional audio-only tracks, but for cutting to dialog you really need to see the primary audio waveform that's in the video track.
    Any thoughts?

    msimpson,
    No. The waveforms are only visible in the two separate audio tracks.
    A work around would be to use Advanced>Extract Audio command.
    This command, in spite of its name, copies the audio to one of the audio tracks and sets the volume level of the audio to zero in the video track.
    Now you'll have the waveform to use in editing. When you're done with it, you could delete it and raise the volume again on the video track.
    Matt

  • Easiest way to see the source of photos ?

    Still having trouble !
    If on a webpage something is missing hows the easiest way to
    see the file that should be in the empty place ?
    Everything works fine on dreamweaver but when i uploaded it
    all went to pot ! The htm is there but no photos or internal links.
    a lot of people have said that file says etc etc how is the
    eassiest way to find what the full file name is ?

    see my response in your other thread. i think i may have
    answered your question there.

  • Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

    Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

    Go to Settings>iCloud>Storage & Backup>Manage Storage.  Your backups are listed at the top, along with their sizes.  Note: this will only list your most current backup.  You may have your previous two backups available too but you cannot access any size information about them.

  • Do we have a way to get the differences between xtext model before and after partial parse?

    Do we have a way to get the differences between xtext model before and after partial parse?
    As an example i have file contains 4 lines, xtext parsed this file and generated its model, then i made small modification in line number 3, so xtext partially parsed the file and generated another model.
    The question is could we get the nodes that has been deleted from the model?
    could we get the new nodes added to the model?
    could we get the differences between the two models?

    Workflow {
    bean = StandaloneSetup {
    scanClassPath = true
    platformUri = "${runtimeProject}/.."
    // The following two lines can be removed, if Xbase is not used.
    registerGeneratedEPackage = "org.eclipse.xtext.xbase.XbasePackage"
    registerGenModelFile = "platform:/resource/org.eclipse.xtext.xbase/model/Xbase.genmodel"
    component = ParseXextModel{
    //Load the xtext model and keep the reference of the inmem model
    component = DirectoryCleaner {
    directory = "${runtimeProject}/src-gen"
    component = DirectoryCleaner {
    directory = "${runtimeProject}/model/generated"
    component = DirectoryCleaner {
    directory = "${runtimeProject}.ui/src-gen"
    component = DirectoryCleaner {
    directory = "${runtimeProject}.tests/src-gen"
    component = Generator {
    pathRtProject = runtimeProject
    pathUiProject = "${runtimeProject}.ui"
    pathTestProject = "${runtimeProject}.tests"
    projectNameRt = projectName
    projectNameUi = "${projectName}.ui"
    encoding = encoding
    language = auto-inject {
    uri = grammarURI
    // Java API to access grammar elements (required by several other fragments)
    fragment = grammarAccess.GrammarAccessFragment auto-inject {}
    // provides a compare view
    fragment = compare.CompareFragment auto-inject {}
    component = ParseXextModel{
    //Load the xtext model again and keep the reference of the inmem model
    component = CompareModel {
    //Implement this using EMF Comapre to see the differnces between 2 models
    }

  • Is there a way to see the photo information on the iCloud sharing pages?

    There seems to be an issue with Apple wanting people to see the information for each photo easily.  When I share a photo in a shared album on iCloud, I don't see the title nor do I see any photo information, only the date that the photo was shared. 
    I DO see the date of the picture when it's in slide show view, in light font at the bottom right-easy to miss, but not when it's the basic view that allows us to scroll through the photos. 
    Is there a way to see the title and date of the photos on the left where the black space is and the sharing info is?
    It seems that this whole Photos program is half-done...
    Thank you,
    Dave

    There is an App at the App store called "Battery Magic". You can get a trial version, (free) that will show you what you want to know, including battery life, and how long you can play games, music and other things on your current battery life.
    You can also download the full version. I think its $0.99.

  • If I use an SD card for both Windows 7 and Mac, is there any way to see the documents from the Mac sight while on the windows side?

    If I use an SD Card on both the windows 7 and Mac OS (using bootcamp), is there any way to see the data seen on the Mac OS side while using the Windows OS?

    Windows Aero style uses a different background image than Mac:
    Windows Aero:
    #nav-bar {
    background-image: linear-gradient(rgba(253,253,253,0.45), rgba(255,255,255,0));
    Mac:
    #nav-bar {
    background: url(chrome://browser/skin/Toolbar-background-noise.png),
    linear-gradient(hsl(0,0%,93%), hsl(0,0%,83%));
    I can't test hands on, but you might be able to clear that OSX "fog" using a rule such as:
    @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
    #nav-bar, #PersonalToolbar {
    background-image: none !important;
    background-color: transparent !important;
    This could be applied using the Stylish extension or by creating/editing a userChrome.css file.

  • HT1435 During normal charging phase is there a way to see the estimated battery% ?

    A1285 (EMC 2287) iPod nano 4th Gen
    During normal charging phase is there a way to see the estimated battery% ?   If I am at 10% and plug in to charge and it takes 30 minutes to get to 55% then I know there are about 30 more minutes of charging until I'm at 100%.

    There is an App at the App store called "Battery Magic". You can get a trial version, (free) that will show you what you want to know, including battery life, and how long you can play games, music and other things on your current battery life.
    You can also download the full version. I think its $0.99.

  • Is there a way to see the entire schema ?

    We are using Information Steward 4.2. I was wondering if anyone has found a way to see the entire database schema, rather then just the 'related-to' relationships for a given table within Metadata Management.
    Thank you.
    Arlene

    Hi Arlene,
    We are using IS 4.2 .
    I'm able to see the schema structure in Metadata Management.
    Metadata Management ->Select Ddata Insight connection ->Select Tables ->Select Columns
    which gives entire schema.

  • TS3999 Is there a way to see the date you invited someone to an event on your calendar?

    Is there a way to see the date you invited someone to an event on your calendar?

    How are you getting to full screen mode? I assume you are using Full Screen mobile add-on?
    Try the following instead:
    * Download Firefox Beta (v22) from google play
    * Navigate to about:config
    * In the search bar look for "dynamic"
    * Toggle 'browser.chrome.dynamictoolbar' to 'true'
    * Close the tab
    Now when using Firefox beta the navigation/loading bar will disappear automatically when you scroll down a page and will reappear when you click on a link.
    Please note that this is an experimental feature so there may be some issues. But I think it works better than the add-on. The feature will eventually come to the standard release version of Firefox for Android.

  • Iphoto-journals (my friends doesn't have an access to see the journal i'm sending to them - why is that?

    when my friend is trying to open an invitation to see my journal from his PC - only thing he can see is "you don't have an access to see the journal. Who exactly can see my journals? To whom I can send the links and to whom i can't -?

    Hello !
    I am not sure about your question because I don´t know what you have exactly done - but I try to explain.
    If you publish a journal to iCloud then you have 2 sections. The first is publish (includes invite and view in Safari) and the second is on homepage / website (also includes invite and open in Safari). The big difference is that booth invite buttons generate two different links (invite yourself with a email to your account and compare the links) !
    Let´s say you have a public journal - then you select publish and also on homepage / website.
    Let´s say you have a private journal - then you select publish alone (without on homepage / website).
    Now it is on you whom you send which link. The error message comes up if someone opens the link from the invite email of section 2 (for public journals) and you have only journals which are not on your website / homepage.
    C. M.

  • Is there any way to see the  user name(authorized) to logon IR

    Hi,
    Is there any way to see the user name(authorized) to logon Integration Repository?
    I am getting error while trying this out.
    Can anyone please help me.
    Thanks.

    Hi,
    YES, you can see in SU01 and select the user . ANd check for the Roles assigned to that particular User.
    By seeing the Roles itself we can be able to say the Authorized or not
    Regards
    Seshagiri

  • I lost my iphone but the battery has died. Is there any way to see the last known location of my phone before it shut down?

    I lost my iphone but the battery has died. Is there any way to see the last known location of my phone before it shut down?

    No

  • Do we have a way to override the markers which XText use?? the problem is that xtext marker does no

    Do we have a way to override the markers which XText use??
    The problem is that xtext marker does not propagate its effect to the views
    ex : (Syntax errors does not appear on Problems view)

    Hi Christian,
    Thanks for your help, my first problem resolved,
    Another issue with the marker, currently i am trying to import files and parse them using the code below
    XtextResourceSet resourceSet = injector.getInstance(XtextResourceSet.class);
    Resource resource = resourceSet.createResource(URI.createURI(filePath));
    resource.load(inputStream, resourceSet.getLoadOptions());
    And all of them contains syntax errors.
    The issue is the markers did not appear on the files in project browsers, and by opening any one of them in the editor, the markers appears on all of them (without extra parse)
    example:
    i imported "a.dsl", "b.dsl" and "c.dsl" and all of them contains syntax errors, but no markers will appear in the project browser.
    by opening "c.dsl" in the editor the markers will appear in all of them.

Maybe you are looking for