Do we have any documentation describing the process a customer would have to follow to consolidate multiple WCS systems into 1 PI?
Do we have any documentation describing the process a customer would have to follow to consolidate multiple WCS systems into 1 PI?
NCS release notes provide details on migrating multiple WCS servers to NCS, which then can be upgraded to PI.
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/release/notes/NCS_RN1.1.1.html#wp298961
Similar Messages
-
Is there any documentation on the BC Data Centre's?
Hi,
I have been a premium reseller of BC for over two years but I am struggling to find any documentation about the BC Data Centre's. I have not been asked before but I am launching a delegate Registration Microsite for Symantec and as with all larger companies their procurement process requires evidetiary documentation to be supplied.
Specifically they are asking for specification or documentation on:
ISO 27001 certificate and Network Penetration test information.
Any help or guidance to this information would be greatly appreciated.
Cheers
RobHi Sidney,
Thanks for the helpful responses. I have had some progress with my queries and have now recieved PCI compliance documentation that BC sent through after your suggested ticket. Moving forward, I think that the shift to AWS will resolve all certification and compliance issues - I imagine this doesn’t come up too often with a product that is aimed firmly at SME’s.
My issue arose as I work for SME’s who in turn work for Blue Chips. Companies like Symantec, Sony & Canon all have extremely stringent procurement procedures even though they are budget conscious and the inference of documentation falls down the chain to us the technical supplier – the National Account Managers and Product managers just set up the deals and promotions and the legal/financial teams then throttle everyone with paperwork. They have simply been told that any websites which contain staff information must reach a very high standard of security and auditory compliance which is understandable but cannot be answered with ‘well its Adobe… of course they are secure!’.
I will follow up to the community when I have finished my research and have a result!
Thanks
Rob -
Describe the process flow in MM
hi i m new to MM,
can u pls describe the process flow in MM
thanksHi Sudeep,
The MM flow is as follow:
1) Purchasing Requsition -> sent by inventory dept to purcharsing dept
2) Request for Quotation(RFQ)-> Purchasing Dept shall ask the vendors to give the quotation for the requested materials by inventory.
3) Quotation -> Quotation is sent by vendors to the company
4) Purchase order-> Based on all paramers of a quotation sent by vendors. Vendors are selected from whom the material has to be obtained. The company gives purchase order to the vendor.
5) Good's receipt -> vendors sends the goods to the company with goods receipt
6) Invoice verification -> this done based on good's receipt. this means that the ordered goods have reached or not.
7) Payment -> payment is done based on invoice verification. this is (FI/CO) *-- Santosh Kumaar.M
Full MM Transaction Codes Flow with table
Purchase Requisition ME51N (Table - EBAN)
RFQ to Vendor - ME41 (EKPO, EKKO)
Raising Quotation - ME47 (EKPO, EKKP)
Comparison of Price - ME49 (EKPO, EKKO)
Creation of PO - ME21N (EKPO, EKKO, EKBE, EKPN, EKKN, EKPV)
Goods Receipt - MIGO (MSEG)
Invoice (Bill PAssing) - MIRO (BSEG)
Goods Issue - MIGO (MSEG)
Physical Inventory - MI01( Create doc) (ISEG)
MI04 (Enter Count) (ISEG)
MI07 (Post) (ISEG)
Hope this helps.
Reward if useful
Shawn -
Can any body explain the process of "how to sell the goods under loan"
hi,
sap gurus,
can any body explain the process of "how to sell the goods under loan"
and its further process.
regards,
balaji.t
09990019711Hi,
I didnt get your question fully, but
Please refer the folowing link
http://help.sap.com/saphelp_banking463/helpdata/en/09/7cba34e465b73ee10000009b38f83b/frameset.htm
Thanks,
Raja -
Is there any documentation regarding the fuego.fdi.* libraries
Is there any documentation regarding the fuego.fdi.* libraries
thanksHey lloyd,
It looks like there is!
Within Studio, click on the 'Documentation' flap on the bottom of the screen.
Then, open the project flap, and navigate to Catalog -> Fuego -> Fdi
Double click on any of the individual components, and its documentation will appear within the documentation flap on the lower portion of the screen.
If you don't see any documentation, check the tabs at the top of the documentation flap - the tabs allow you to switch between the documentation for the current method you're working on, and the component you've selected.
-Noel -
Kindly sent the any documents of the Process of Charstic based forcasting i
Hi
Kindly sent the any documents of the Process of Charstic based forcasting in DP
Regards
kiranKiran,
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40704b05-6eb9-2c10-2daf-b3f96f59a900
For additional detail you would probably benefit from
https://training.sap.com/us/en/course/scm226-configuration-of-demand-planning-classroom-001-us-en/
I took this class a while back and it was very helpful.
Best Regards,
DB49 -
Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?
No. Unfortunately, you can't combine Apple IDs togetehr, even if you own them all.
-
In SharePoint 2013 if you search for an exact phrase and then view a PDF that is returned by the search (in Reader via the PDF plugin) then the Reader will treat the complete phrase as individual words.
For example, search for "High Court" in SharePoint, get returned a set of PDF documents, and when you view one of them through the Reader the hit highlighting will be for each instance of "High" or "Court".
What is wanted is hit highlighting only of instances of "High Court".
I get the same behavior if the Adobe PDF plugin is installed with the Filesite DMS. So it seems to be standard behavior for the Adobe PDF plugin
Is there a way to make the Adobe PDF plugin carry exact phrase search criteria through from source system into Reader? And then hit highlight the exact phrase only.Hi Sam,
You can opt for 'Advance Search' option in Reader to match the whole words to get to the specific documents.
Regards,
Rave -
I would like to be able to backup all of my old emails and remove them from the MacBook Pro HDD. I am using Time Machine and a Promise Pegasus RAID display. I can't seem to find any information about how this might be accomplished. If any one knows how to do this, please post the process in as much detail as possible. Thanks to all who respond.
You cannot use a Time Machine backup as a substitute for storage on your computer's hard drive. For that you need a separate storage-only hard drive. If you haven't space on your hard drive, then you should think about getting a larger hard drive and/or moving files to a permanent storage drive.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
I created a GIFT file with 25 questions, but when I import into Captivate 8.0.1.242 I can only see the first 5 questions. I have triple-checked my import file for any syntax or other problems, but it seems perfectly fine.
Any ideas?The info on Adobe's online help needs to be updated. You must save your text file in UTF-8 format, otherwise only the first five questions will be imported.
-
Any document describe the WSS_Logging database?
Dear all,
The only document I found is this one:
http://technet.microsoft.com/en-us/library/hh769360(v=office.14).aspx
I would like to understand how the data built. For example, what is the column [RequestUsage].[RequestCount] represent?
Thanks.
MarkI'm finding no other offical documentation, except the article you've listed. To me it seems you have to deduce the meanings from the design and contents of the views in the logging db, and, if you're looking for the specific meaning of something look for
blog and forum posts and maybe learn more (because there are a lot of posts about this topic, all seem to be not very in depth).
As far as the RequestCount column, my take on it is this: it shows the number of requests within the dimensions listed (such as a unique user, correlation id, session, doc path and so on).
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
I already stated the problem above, but I am able to download the file. Yet, when I try to begin the setup it says "trying to connect to server" and does not do anything else. I need help to finish the set-up!
Download trial photoshop are you on a managed network? Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.
-
I can't install Any app, Like the process stops
When I try to install an app from the App Store I click on Free button, then they ask for my password... After it just go back to the Free button without Any installation??
Hi..
Installing the appropriate combo may help as that reinstalls the App Store for you.
For Snow Leopard v10.6 > Mac OS X 10.6.8 Update Combo v1.1
For Lion v10.7 > OS X Lion Update 10.7.4 (Client Combo)
Restart your Mac after the combo is iinstalled then try the App Store.
Tip.. when you post for help, please tell us which Mac OS X you have installed -
CE - Segmented db. BP copy failed. Any documentation on the exact sequence?
Dear All,
I have tried Copy Express on a segmented database.
After some master settings I was able to migrate the COA, Warehouse, Item group and Item Master.
However, Business partners did not get copies.
What is required for the Business partners migrated?
How does CE take care of the Udfs?
Is there any std document which will tell me the exact sequence of activities to do in CE to get the masters migrated ?
Regards,To copy master data, using DTW is recommended. CE is specialized in copying configuration setting
Thanks,
Gordon -
One of my customers asked me this question...
I'm have an issue with a change in the execution order in TestStand 4.1.1. [he has upgraded from 3.1 to 4.1.1] It looks like ProcessModelPreStep runs earlier in 4.1.1 than it does in 3.1. This causes our model to error out because some required variables haven't been defined when it runs. I wish there was a big flow chart or state diagram for TestStand. Maybe there is and I don't know where to look?
Scott Rogers
Sr. DSM
Western NY
Solved!
Go to Solution.Starting with TS 4.1, there is a flow diagram that can be displayed for a selected sequence...
Select "View -> Sequence File -> Display File Hierarchy"
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness
Maybe you are looking for
-
I was using my phone, then it prompt me about a new update. I hit the button to update, after few minutes or so my phone shuts off and came on with an iTunes logo and that's where the problem starts. I thought it was signaling for me to connect my ph
-
Formatting to windows XP Ipod nano Usb 1.1
I have made numerous attempts to format my Ipod Nano? to no avail, stops while formatting ask's to plug in again? Going crazy why is the Ipod not formatting? My USB is not 2.0 could that be it?
-
After Effects CC crashes on startup. 12.2
Everytime I open up After Effects CC it repeatedly crashes and I have uninstalled and installed this program twice already. I repeatedly get this error message... After Effects warning: Could not rename the file '/Users/Haydo/Library/Preferences/Adob
-
Without using the preview option, is there a way to open a message and sort it to a sub mailbox that I created? It seems there are no toolbar features that allow this. On the iPhone, I can move the message to a folder right from the message, is that
-
Subcontracting & In-house production
Hi PP gurus, Hope someone can give me some good suggesions. Material A is produced in-house and is a finished good. The components of A are B & C. The material C which is a semi finished good is procured externally from vendor X. C co