Do we have any setting to pick quantity automatically
Hi,
Please let me know the process to pick quantity automatically in the delivery.
Hi,
It is possible to acheive automatic picking in the delivery with the
output type EK00. Please review the notes 145136 and 6566 for further
information.
Hope this information helps.
Warm Regards,
Pavani.
Edited by: Pavani Mantravadi on Oct 13, 2011 9:02 AM
Similar Messages
-
Picking quantity automatically populated
Dear All,
During delivery processing i have maintained picking request output to be printed when delivery is saved ,
but when i save the delivery to print the picking list the pick quantity is AUTOMATICALLY populated
kindly advise how do i prevent this as we have to count the items and enter the picked quantity.
With Regards
Mohammed RaeesDear David,
As per your advise the system is not printing the Picking Request
But we need the picking request to be prited for the delivery execution
Kindly advise how can i print the picking request and avoid the system populate the picking quantity automatically.
currently the system when saving the picking request is populating the picked quantiy equal to delivery quantity
even if the picked quantity is partial,if the delivery is saved then the system is making the pick quantity equal to delivery quantity
kindly advice
Regards
Mohammed Raees -
When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.
bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone. -
When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)
It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.
-
I had an iphone that would not work and they sent me a replacement. I have everything set up the same as my last one except that now on the screen it registers 373 on the mail button. I don't have any mail in my mail box. Everything is cleaned out but it still registers 373 on the front of my phone. How do I get this to go back to normal?
If your email account offers a webmail access, I suggest checking the webmail - log in to your account using the webmail access, and I predict you will see all those "unread" emails there and can dispose of them from there.
This happens because the iPhone that went bad, when reading those emails, did not remove them from your email provider's servier. -
my pictures are not showing up on my iphone 4s and i do not have icloud set up is there any way ro fix this?
Pictures from where?
-
My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?
Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766 -
I am using ethernet and am using a Linksys SE1500 5- port fast etherner switch, i cant seem to sign in on the apple for anything although I have accounts set up in itunes/apple and netflix . Any suggestions PLEASE have spent 3 hours trying everything I can think of. Any help will be appreciated!
I have a linksys router but it isn't strong enough to get to this computer, so we are using ethernet.
Thank you
ColleenWelcome to the Apple Community.
Are you getting any messages about date and time.
Have you tried restarting the Apple TV by removing ALL the cables for 30 seconds.
Are you connected to the network correctly. -
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?Thanks for your response,
I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all. Frans Vischer
author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
www.fransvischer.com
pamperedfatcat.wordpress.com -
Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting on the computer, and how?
One possibility is that you may need to "Upgrade" your Cable /DSL Modem if you have an older unit. ISP's that provide your Internet service in recent years have been switching over from DOCSIS 2.1 version Modems to DOCSIS 3.0 version Modems, which handle the new higher data streaming speeds the ISP's are offering. I would suggest you call your ISP's Technical Support and inquire about this possibility.
-
my home button is working intermittantly. Have Restored setting. still problem. Any ideas?
Did you actually restore the iPad? Or just restore settings?
If you haven't "restored" the iPad...
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If a restore doesn't work... > Apple - Support - iPad - Hardware Service -
I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?
LOL.. don't switch off the TC.. this is fairly typical behaviour..
Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
Are you running latest firmware for your TC?
What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
Get one bigger USB hard disk instead of 3 smaller ones. -
In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?
Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install -
How can I decrease my font size in mail? I have it set to small and yet it is enormous, letters running into one another. I have rebooted and more. Something is over riding my setting. Any suggestions?
You haven't mentioned which mail it is,
If it is G-mail go to settings --> general tab--> default text style , you can change your font size & then save at the bottom of the page
Maybe you are looking for
-
DFM 3.2 email notifications have stopped
Good day. We're running LMS 3.2 with DFM 3.2, and at some point within the last month, email notifications from DFM have stopped flowing. DFM is trapping events as they occur and these are viewable through the portal, but notifications that should b
-
Flash Web Gallery not working in Firefox
I am having problems getting the following site working in Firefox, although it works fine in IE. http://www.starmooseglamour.net I initially had the \bin\images\ issue so I implemented Sean's suggested fixes: http://forums.adobe.com/message/1391286#
-
Microsoft Office 2013 Free/Busy Information Issue
We have several users that cannot see the free/busy information of another user in their Outlook 2013 calendars. Creating a new Outlook profile for the user and repairing office solves the issue for a short period of time. Users are running Windows
-
Problems with break point in Dual Layer project
Hi, I'm currently having a problem setting a break point in a Dual Layer DVD project in DVD Studio Pro 4. I have a project that has 5.9 GB of data (5 shows with between 7-8 chapters in each). The problem I'm having is that in the 5th chapter of the 4
-
WOW! what do you have to do to get a simple customer support answer?
Error 213:19