Do we have any such Report in SAP HR..???
Dear Team,
I have one sceniro it goes like....
Suppose i have project/system where many emp works on various assignments and projects and among them I want to capture/record following details from each Business Units...
So, do we have any standard repots/technique in SAP HR by using which i can capture above said details.
Inputs parameters will be:
1.Emp#
2.Cost of the project
3.Revenue Generated.
4.and Billing.[After posting or draft/final bill]
Many thanks,
Shabbir Maniyar.
Yes, below mentioned 3 fields/parameters comes in HR part.
1.Emp#
2.Cost of the project
3.Revenue Generated.
But where as Billing comes into FICO, But still i want to take data from FI to HR and generate the report with Billing cost as well.
Bottom line is all these are mixture of FI and HR related.
Similar Messages
-
Does SAP have any WBS report able to drill downdown detail to PO level
Hi Expert,
Would like to seek for your advise as below:
a) Does SAP have any WBS report able to drill downdown detail to PO level for the assign cost?
What is the T-code?
b) What is the table contain WBS information with related PO level for the assign cost?
Please help.
Regards,
KHHi,
a) Try CJI5 as menioned by Gokul.
b) Try a query combining EKKN, EKPO and PRPS (if you need any other WBS detail).
regards
Sreekanth -
looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free or even paid will work.
I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers. I did not say it will work with any carrier at one time. I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it. As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you cna purchase a SIM card that works with your new carrier.
The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince. I was thinking something more along some of the really durable cases at BallisticCaseCo.com
As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped. For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc. I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time. -
Hi All, I want an application which can make other application password protected, Do we have any such application like applocker etc for iPhone 5
Some apps allow you to do this with documents, photos, and videos but it is not possible to do with apps. Your best and only solution is to use the phone passcode.
-
when i try to use icloud on my ipad i get a message to log onto email for instructions to verify account. However when i look at my email i have no such messahe. When i check my icloud on my mac it sais i am verified. What do i do
How old is your battery? This weird trackpad action was the same thing that happened to me when my 3 year old battery started to swell. As it swelled it pressed up on the trackpad and caused all sorts of almost ghost like mouse pointer movements...many all on it's own. The battery itself still held a charge.
I took the battery out and could barely see where it had swelled. I then ran my MacBook Pro with battery out on the MagSafe adapter. No more ghost mouse pointer movements, resizing, dragging, and clicking.
If you can remove the battery DIY, try what I did.
I installed a new battery and everything is back to normal. -
Do we have any standard report for Late coming of employee
Dear Gurus,
Any Standard Report for late coming of employee.
For Example :- Shift Timings are from 9.30 AM to 6.00PM, If an employee comes after 15mins its considered as late. System has to track all the employees who comes after 9.45 AM.
Hope its clear.
Regards,
RaviHi Ravi
Report RPTEAB00(Attendace Check) may help.
Regards
Ralf -
this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage
The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites -
Report in SAP that shows me the fixed assets per vendor
Hi,
I have been asked to produce the following;
Can I run a report in SAP that shows me the fixed assets per vendor?
I need the detail of the depreciations (start and end date, purchase price, depreciation rate, methodu2026) and the fixed assets register (purchase amount, purchase date, vendor nameu2026)
Could you kindly explain to me in simple steps what report I should run?
Many thanks in advance.
AlexHi, there is no such report in SAP. You can develop your own, The main issue is that to get vendor for asset to which were issued material from storage. You can do it via batch(write down while purchasing to some field, or to find it via batch). Fir material for which batch management is not active it's not possible to, because you can buy one material from different vendors.
-
Importing Crystal report in SAP B1
Hi All,
I have imported crystal report in SAP B1.
In Parameter screen there are 3 parameters.(From Date, To Date and Location).
In that Location should have values from OLCT table.
How can i fill that location text with location name without FMS.Hi,
i have a data as below (OPOR table)
DocKey DocNum Series and other details.........
1 1 Primary(i.e any numeric value)
2 2 Primary(i.e any numeric value)
so on..................
3 1 User Defined(i.e any numeric value)
4 2 User Defined(i.e any numeric value)
so on.................
Now both the series have different period indicator (i.e primary is of default(sap one) and User defined is of 2010-11).
and now whenever i want to show the report for PO No 1 from any of the series it takes both the records!!!
i hope its clear for u all!
Thanks and Regards,
Edited by: Shraddha P on Sep 24, 2010 3:42 PM -
Trouble: Crsytal reports for SAP Best practices
Hello Friends,
I have downloaded crystal reports for SAP Best practices. There are bunch of Crystal reports whose data source is a infoset query.
Below are the reports
Cost Analysis: Planned vs. Actual Cost Variance for Cost Centers Table: CSKT, CSLT
Query: CO_OM_CA_20_Q1
InfoSet: ZBPBI131_INFO_ODVR
Cost Analysis: Planned vs. Actual Order Costs Query: CO_OM_OP_20_Q1
InfoSet: ZBPBI131_INFO_ODVR, ZBPBI131_INFO_COAS
Controlling Dashboard Table: CSLT
Query: CO_OM_CA_20_Q1, CO_OM_OP_20_Q1
InfoSet: ZBPBI131_INFO_CSKT
I have created the above Infosets using the document which comes with the installation. However I couldn't find any documents to create these queries. I also searched the SAP system if these were predefined but I still couldn't find.
Note: I am ECC 6 and Enhancement pack 3
Question: Where are these queries?? How do i create them?
Any inputs would be really appreciated?Hightlight the G entry and invoke the context menu.Select Options and in the Table name field enter the following
CO%
Close the options window and press F5. Navigate again to SAP Infosets and to the opened connection to your system. Under Q->G you should be able to see the CO* Infosets.
Regards,
Stratos
BTW % is a wildcard (same as * in Windows/Unix ) -
Crsytal reports for SAP Best practices
Hello Friends,
I have downloaded crystal reports for SAP Best practices. There are bunch of Crystal reports whose data source is a infoset query.
Below are the reports
Cost Analysis: Planned vs. Actual Cost Variance for Cost Centers Table: CSKT, CSLT
Query: CO_OM_CA_20_Q1
InfoSet: ZBPBI131_INFO_ODVR
Cost Analysis: Planned vs. Actual Order Costs Query: CO_OM_OP_20_Q1
InfoSet: ZBPBI131_INFO_ODVR, ZBPBI131_INFO_COAS
Controlling Dashboard Table: CSLT
Query: CO_OM_CA_20_Q1, CO_OM_OP_20_Q1
InfoSet: ZBPBI131_INFO_CSKT
I have created the above Infosets using the document which comes with the installation. However I couldn't find any documents to create these queries. I also searched the SAP system if these were predefined but I still couldn't find.
Note: I am ECC 6 and Enhancement pack 3
Question: Where are these queries?? How do i create them?
Any inputs would be really appreciated!!
Thanks,
ShivHi Shiv, this forum is to support Crystal Reports. I suggest you post your question to one of the SAP forums for how to use that tool to create the queries.
-
Standard Reports in SAP HR for The Sales Promotion Employees
Dear All,
I wanted to check whether we have any standard reports / formats in SAP HR for The Sales Promotion Employees
(Conditions of Service) Rules, 1976.
Like Form A, Form B, Form C and Form E
http://www.google.co.in/url?sa=t&rct=j&q=sales%20promotion%20employees%20act%201976&source=web&cd=2&sqi=2&ved=0CCQQFjAB&url=http%3A%2F%2Flabour.nic.in%2Fact%2Facts%2FTheSalesPromotionEmployees(ConditionsOfService)Rules%2C1976.doc&ei=fwXwTvLXBcrPrQet3_TyDw&usg=AFQjCNEXxqcRUzJ8M4LXxYYzTSm75Cdc_Q&cad=rja
Pls provide some inputs on this...
Kind Regards
NagHi,
this link will give you all the list of cubes, datasources, dso etc in payroll.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/86/3a1d3c55a0f503e10000000a114084/frameset.htm
regards,
ray -
Performance issue of BI reports in SAP Enterprise portal
Dear Friends,
We have integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to performance effect.
In Bex ( BI side) reports performance is little better than SAP EP platform. BI Team also looking for ways to improve performance at BI side.
Could you please share your valuable ideas to improve the performance at SAP EP side also ..
Thanks and Regards
Ratnakar ReddyHi ratnakar,
The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
Hope this helps. -
Standard report in SAP to see the Purchase Order and corresponding PR
Dear All.
Is there any Standard Report in SAP , which can provide details of the Purchase Order and the corresponding Purchase Requsition.
Regards
Shyam.Hi
ME2L Purchasing Documents per Vendor
ME2M Purchasing Documents per Material
ME2K Purchasing Documents by Account Assignment
ME2W Purchasing Document by Supplying Plant
ME5A List Display Of Requistions
ME2W Purchasing Document by Supplying Plant
ME80FN General Analysis of Purchasing Documents -
9.0.1 any early reports??
9.0.1 has been released. Anybody have any early reports??
Thanks,
CurtisOK, here goes.
In Logic Pro 9, if you instantiate an EXS24 and go under Options in the GUI, you will see a Virtual Memory options area. 2 new options were added: "On, optimized for EXS 24 instances" and On, optimized for AU SI instances"
They mean exactly what they say. In 9.0, if you choose the former, you can run a ton of EXS 24s (the memory pool kicks in at a little after 1.5 GB) but ten if you start to add i.e. Omnispheres, Logic goes kablooey. If you choose the latter, you can load a surprisingly large number of 3rd party software instruments, but then if start adding more EXS24s, Logic goes kablooey.
So its is do you wish to die by drowning or by burning? Laughing
But Apple has done something under the hood with 9.0.1. Now if you choose the option prioritizing the AUs , you can also add a considerable number of EXS24s.
I have a now lowly Quad Core with 13 GB RAM under 10.6.1 and I was able to successfully load and run:
28 EXS24s
17 Kontakts
1 Play for Stormdrum 2, 4 sounds loaded
1 Omnisphere
1 Altiverb
UAD-2 FX, 1 each: Plate 140, Pultec, Precision EQ, Precision Limiter
At that point Logic became 2 sluggish to be practical.
But there is more. When you are adding instruments, at some point Logic will give you a warning that you are doing so and suggest you cut it out. (If you do not, Logic will tell you that the project has crashed, save it for you, and quit.)
When you get the warning, if you quit Logic and then re-open the project, suddenly you can add even more. I tried this 4 times and each time I could ad a little more.
Now I am not advocating pushing it to the max as I am sure Logic will get flakey and between EXS24's memory management scheme and Kontakt's memory server, I no longer trust anything Activity Monitor tells me, but clearly this is a big improvement in LP 9.0.1.
With today's computers and LP 9.0.1 and something like VE Pro and/or Plogue Bidule, I think we are at the beginning of an era where the CPU and RAM bottlenecks for running lots of software instrument instances will be a thing of the past. Very exciting.
Maybe you are looking for
-
About ora-01006 :bind variable does not exist
Hi all of you,i have this dynamic sql : DECLARE v_query clob; cpt number; begin v_query:=' SELECT count(TBA.ANT_ID) FROM WHERE TBA.ANT_FUT_ID = TFT.FUT_ID AND TBA.ANT_KATEGORIE_CODE_ID = TAKCL.ANT_KATEGORIE_CODE_ID(+) AND TBA.ANT_KFZ_
-
hp officejet pro 8500a plus (910g) prints from mac os 10.6.8 with a usb, but stopped printing wirelessly HP Network Configuration Page states Network Status: ready and Active Connection Type: Wireless Wireless Network Test Report - looks A-O.K. Turne
-
Make hidden files visible in Finder
I have a hidden file .VBT5 apparently located in the Time Machine partition of a FW800 connected external drive that is causing problems for Virus Barrier X6. The .VBT5 was created by Virus Barrier X5 and apparently missed during it's uninstall. I us
-
QoS - Create class-map while inside policy-map
The cisco training notes for CME claim you can create a non-existant class-map while in the policy-map. Here is the what the notes say router(config-pmap)#class class-map-name condition ? Optionally you can define a new class-map by entering the cond
-
Cisco Prime UPMDbMonitor and UPMProcess shutdown
Hi, I have a Cisco Prime LMS 4.1 in soft appliance, all process are running in normal state and suddenly UPMDbMonitor and UPMProcess are in a Administrator has shut down this server state. Why is this happen? I start again these two processes and sta