Do we have Table compression in Standard Edition

Hi,
We installed Oracle Version 11g(11.2.0.2) in our Local server and the size of the table is around 11GB. we thought of doing Table Compression. My Question is Are we having This feature in 11g Standard Edition?
Thanks,
Lakshmikanth

Sorry short update...
I found a old Thread here with same information about this issue.
License for Table compression
regards
Peter

Similar Messages

Is it possible to have two Paired Lync Standard Edition servers in different domains?

We initially installed Lync in a parent domain with all the users in the child domain. The user's SIP addresses is that of the child domain. We now have a requirement to migrate the server to the same child domain as the users. At the same time we
need to set-up a new server to test some planned network changes. Would it be possible to set-up another Standard Edition Front End Server in the child domain and pair it with the server in the primary domain? We can then migrate the users across as required.

Hi PanosE,
Yes, you can set up another Standard Edition Server in child domain and then deploy pool pairing.
You need to deploy a new Front End Pool for the new Standard Edition Server.
A similar case for your reference.
https://social.technet.microsoft.com/Forums/office/en-US/eca4299c-8edb-481e-b328-c7deba2a79ba/lync-2013-standard-edition-lync-fe-pools-in-multiple-domain-single-forest-senario?forum=lyncdeploy
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

OBI Standard Edition One (10.1.3.2.1) Database Error

Hi Guys!
I installed OBI Standard Edition One (10.1.3.2.1). In that BI Admin tool, Presentation services were installed properly. But i have problem in OBI Standard Edition One database it is not installing properly. While installing i didn't get any error message but in start menu i can't able to find any oracle home folder, no oracle listener. The sample reports i opened in dashboard all reports showing TNS error message.
Can any one tell what is the problem how to solve the problem....

Ya i'm having but what about OBI Standard Edition database? i want to see the OBISE one inbuilt tables! How to fetch the default schema?

Failover in 10g Standard Edition tips

Hi guys,
We have an Oracle 10.2.0.5 Standard Edition Database in a Windows Server 2008 x64, and we were looking for a Failover solution. The idea is when the primary server could have a problem, automatically open in read/write mode the standby DB, and after repairing the primary DB, propagate the changes from the standby to the primary.
After researching, we had decided to create a Manual Physical Standby Database in another server, following this guide
We are now testing it and seems to work with no problems, but we like to know some tips or advices for that solution, or if it exists one better option for Failover in Standard Edition, from some experienced dbas from this forums. Can somebody help us with that?
Thanks in advance!
Juan Alvarez

user13325846 wrote:
How to programatically partition table in 10G standard Edition ?I had no idea (reading this thread) that 7.3's partition views were still supported. At the time (back in the mid 90's), we were explicitly told not to use this option for a large OPS data warehouse, by Oracle experts that assisted us in building and tuning the system. So never really used this option and thought it deprecated ifo proper partitioning introduced with v8.
I currently roll a my own partition-like feature on 10g SE - using dynamic SQL where a function is used to determine the table name. As all access to the tables are done via PL/SQL, this works fine (and bind variables are used all the way). On the client reporting side, we use APEX. APEX has the option of using a function (supplying the SQL) for reporting region, instead of coding the actual SQL. Again, PL/SQL is used to construct the source SQL (for the appropriate table) and given to APEX to parse and bind and execute as a report.
Of course, this is not nearly as flexible as the Enterprise partitioning feature, but it works fine for the (limited) job required.

Partitioned views in Standard Edition

We have are SQL 2014 Standard edition, I have a situation where-in I plan to partition a table now since table partition is not supported in standard version I thought about Partitioned views however now I am stuck where I cant make the view writable because
of the identity column in the base table.
Do I have any other option in this case ?
Let me know your thoughts
Regards
Vishal
VG

Identity columns are problematic for a partitioned view. If any of the tables include an identity column, you can delete but not insert or update via the view. You could instead use a sequence to generate the surrogate key values, but that may require
significant application changes.
The real question is why you want to partition. There are specialized use cases where partitioning may improve performance (e.g. parallel scans) but you will generally get more benefit from index and query tuning. Partitioning (view
or table) can actually degrade performance depending on the queries and workload. That being said, partitioning always improves manageability.
Be aware that there is additional overhead of partitioned views compared to partitioned tables. Each table within the view may be indexed differently so there is considerable more work for the optimizer to do to generate an efficient plan.
This increases compilation time and can result in suboptimal plans, particularly if the view contains many tables. If your table is so large that partitioning is compelling, you might start making the business case for Enterprise Edition in order
to meet performance and availability SLAs.
I think the Database Engine forum is a better fit for this question so I'll move this thread there.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Help using Oracle BI Standard Edition One

Hi,
I have installed Oracle BI Standard Edition One on a Windows Server 2003.
My aim is to connect to the production database and create reports, graphs etc.
Could you please let me know the steps required?
Thanks & Regards,
Shailaja

Check documentation at http://download.oracle.com/docs/cd/E10352_01/doc/nav/portal_1.htm
Business Intelligence Standard Edition One Tutorial

Performance Tab in OEM ( Oracle database Standard Edition )

We have Oracle database 11g ( Standard edition ONE).
We have installed OEM (oracle enterprise manager) with database installation.
We are not able to access the PERFORMANCE tab in OEM.
1) Is it because Performance tab cannot be seen in Standard Edition ONE version ?
2) When I tried to setup the control_management packaccess parameter in SPFILE, its failing . Is it because
of the database edition ?
3) Any work around in Standard Edition ONE to make the performance tab and tuning pack available with licensing ?

Pl identify which specific version of 11g.
I believe the answers are in the docs -
http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/editions.htm#CIHBAEID
http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/options.htm#autoId28
HTH
Srini

Best way to change from Oracle 11gR2 Standard Edition to Standard one..?

Hi,
I have installed Oracle 11gR2 Standard edition+ installed database and additional software (which looks into the Oracle 11g database) in around 20 PCs (company)
But now the management says that they got license only for 11g Standard one edition (Standard one is significantly cheaper than standard edition)
So I have to change the Oracle edition from Standard to Standard one now..We only need standard one edition features in the PCs.
Can somebody please advise what would be the best way to do this? Do I have to uninstall all database and reinstall standard one edition again?
I will be grateful if somebody says some kind of upgrade is possible(in this case degrade!)..
Pls ..waiting for a reply..its very urgent!
Thanks&regards..

Yes I agree there was standard and standard one options and I selected standard.
But how to confirm?
SQL> select banner from v$version;
BANNER
Oracle Database 11g Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
It doesnt say anything..where else will I check?
Also as said in the previous post,
1) SE max. 4 sockets , SE1 2 sockets <======== hardware restriction
2) No RAC on SE1
3) No Automatic Workload Management (a RAC feature) on SE1
These apply to us.
So can we get a SE1 license, since we are not on RAC and satisfy all criteria for standard one.
Thanks&Regards

Unable to rearm server 2012 standard edition.

Hi All,
I have installed server 2012 standard edition trial on 12 May 2014 but I am unable to rearm and getting error "error: 0xC004D302 On a computer running Microsoft Windows non-core edition, run 'slui.exe
0x2a 0xC004D302' to display the error text".
When I run slui.exe its ask me for activation key.
Please suggest some alternative solution.
Thanks,
Amar

Hi Amar,
àWhile activating
I am getting error "0x8007232B DNS name does not exist"
Regarding to this error, please check if use correct product key to complete Activation via the SLMGR.VBS script.
Please refer to following article and check if can help you.
Windows
2012 Activation Error: DNS name does not exist
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Error 0x8007232b or 0x8007007B occurs when you try to
activate Windows
Hope this helps.
Best regards,
Justin Gu

Integrating crystal report into the visual studio standard edition IDE

I have visual studio 2005 standard edition. I need to upgrade some asp.net reports that were done using visual studio 2003.
I have just install Crystal Reports XI developer edition version 11.0.0.1282. How can I integrate Crystal into the Visual Studio 2005 IDE?

Hi
I would like to inform you that VS 2005 is only compatible with CR XI R2 and CR 2008.
Have look in supported platform guide:
https://websmp105.sap-ag.de/bosap-support
You need to upgrade CRXI to CRXIR2 then try to solve this issue.
To download the CR XI R2 follow the instructions given below:-
Crystal Reports XI is installed on your computer. You need to manually uninstall Crystal Reports XI for one of the following reasons:
u2022 To verify that all Crystal Reports XI components have been completely removed prior to installing a later version of Crystal Reports.
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the 'Add/Remove Programs' command (Start > Settings > Control Panel).
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the Setup.exe file from Crystal Reports XI installation CD.
How do you manually uninstall Crystal Reports XI?
Resolution
Before getting started, uninstall Crystal Reports XI by launching the Setup.exe file from the installation CD or by using the 'Add/Remove Programs' command. If either of these methods fails to remove all Crystal Reports directories, files and registry keys, then continue with the resolution of this article.
==========
WARNING:
This resolution can be applied if Crystal Reports XI is the only software installed on the computer that uses the Business Objects directories, files and registry keys.
For example, Crystal Analysis, Crystal Enterprise and BusinessObjects Enterprise XI are applications that may share the same directories, files and registry keys.
Removing these directories, files and registry keys may cause other software to function incorrectly.
==========
1. To manually uninstall Crystal Reports XI, delete the following directories:
u2022 C:\Program Files\Common Files\Business Objects\3.0
u2022 C:\Program Files\Business Objects
====================
NOTE:
Do not remove the directory C:\Program Files\Common Files\Business Objects\3.0 if you have BusinessObjects Enterprise XI or Crystal Reports Server XI installed. These files are shared by both applications and removal of these files will cause Business ObjectsEnterprise XI and Crystal Reports Server XI to function incorrectly.
====================
2. Delete the following registry keys:
====================
WARNING:
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk.
HELP:
For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
RECOMMENDATION:
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
====================
u2022 HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
u2022 HKEY_CURRENT_USER\Software\Business Objects
u2022 HKEY_USERS\S-#-#-##-...-####\Software\Business Objects
(The number signs (#) represent a series of numbers that are different on each computer.)
====================
NOTE:
After making changes to the registry, restart the affected service or application as required.
After deleting the CR XI from the system install the CR XI R2 full build and provide the same key as you provided in CR XI.
URL to download CR XI R2 is: - http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CRXIR2
Click on
Service Pack 2 - Full build - ZIP - 1.03 GB - released April 2007
I would suggest to use the latest service pack of CR XI R2 i.e. Service Pack 4.
to download SP4 click [here|http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CRXIR2].
Note:- before installing SP4 - you must have installed CR XI R2 SP2
Hope this helps!!
Regards,

I have Adobe Acrobat 9 Standard Serial No. and would like to upgrade to the Microsoft Windows 8 and the Office Professional Edition 2013.

I have Adobe Acrobat 9 Standard [serial number removed by moderator] and would like to upgrade to the Microsoft Windows 8 and the Office Professional Edition 2013.

Hi w james,
As you mentioned that you are upgrading your Operating System to Windows 8 and MS Office to MS Office Professional 2013, please note that Adobe Acrobat 9 is not compatible with Windows 8 and MS Office 2013. You need to upgrade to Adobe Acrobat XI as it is fully compatible with Windows 8 and MS Office 2013.
For more information, please refer:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
http://www.adobe.com/products/acrobatpro/tech-specs.html

I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF's and I cannot edit them as I could before such as using Tools Comment

I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF’s and I cannot edit them as I could before such as using Tools>Comment&Markup or Tools>Advanced Editing>TouchUp Text Tool. All the functions are greyed out. Please advise.

What's your OS? Acrobat 8 is not compatible with any modern OS.
On Thu, Jan 15, 2015 at 4:16 PM, thomasc1234 <[email protected]>

How many versions of MySQL Server Standard edition have there been?

I need to know how many versions of MySQL Server Standard edition there has been?

I need to know how many versions of MySQL Server Standard edition there has been?
Do you really mean MySQL? Or maybe MS SQL Server? If it's the last, then have a look at:
http://sqlserverbuilds.blogspot.de/
Olaf Helper
[ Blog] [ Xing] [ MVP]

If I already have APEX installed can I install 10g Standard Edition too?

can I have both running on the same machine?

If you are referring to Oracle XE database as opposed to APEX then the answer is yes. Just be sure to assign the Oracle Standard Edition to a different "Oracle Home".

Migration SAP SolMan 7 MSSQL 2008 R2 Enterprise Edition to MSSQL Standard Edition

Hello,
I try to migrate a databse on Windows MSSQL 2008 R2 ENTERPRISE EDITION to
MSSQL 2008 R2 STANDARD EDITION.
In the source system (MSSQL 2008 R2 ENTERPRISE EDITION) there is "table compression" and
"partitioning" active.
Unfortunately the MSSQL STANDARD EDITION doesn`t support these two features.
So a normal DB backup on the source system and restore in the destination system is not possible.
But the tables compression I can deactivte by the SQL script
SELECT DISTINCT ‘ALTER TABLE [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
UNION
SELECT ‘ALTER INDEX ALL ON [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
is there a way to undo or deactivate the the SQL table partitioning without data lost ?
Best regards
B.-D.

Hello Lydia Zhang,
thanks for your help.
For a few tables this will work.
Unfortunately I have an SAP system with thousands of tables and index`s .
With the SQL script:
SELECT
SCHEMA_NAME(t.schema_id) AS SchemaName
,OBJECT_NAME(i.object_id) AS ObjectName
,p.partition_number AS PartitionNumber
,fg.name AS Filegroup_Name
,rows AS 'Rows'
,au.total_pages AS 'TotalDataPages'
,CASE boundary_value_on_right
   WHEN 1 THEN 'less than'
   ELSE 'less than or equal to'
END AS 'Comparison'
,value AS 'ComparisonValue'
,p.data_compression_desc AS 'DataCompression'
,p.partition_id
FROM sys.partitions p
JOIN sys.indexes i ON p.object_id = i.object_id AND p.index_id = i.index_id
JOIN sys.partition_schemes ps ON ps.data_space_id = i.data_space_id
JOIN sys.partition_functions f ON f.function_id = ps.function_id
LEFT JOIN sys.partition_range_values rv ON f.function_id = rv.function_id AND p.partition_number = rv.boundary_id
JOIN sys.destination_data_spaces dds ON dds.partition_scheme_id = ps.data_space_id AND dds.destination_id = p.partition_number
JOIN sys.filegroups fg ON dds.data_space_id = fg.data_space_id
JOIN (SELECT container_id, sum(total_pages) as total_pages
       FROM sys.allocation_units
       GROUP BY container_id) AS au ON au.container_id = p.partition_id
JOIN sys.tables t ON p.object_id = t.object_id
WHERE i.index_id < 2
ORDER BY ObjectName,p.partition_number;
GO
Output:
SchemaName   ObjectName   PartitionNumber   Filegroup_Name   Rows   TotalDataPages   Comparison   ComparisonValue   DataCompression
partition_id
swp   /BI0/F0CCMARSH   1   PRIMARY   0   0   less than   NULL   NONE   72057613126729728
swp   /BI0/F0CCMAWDD1   1   PRIMARY   0   0   less than   NULL   NONE   72057613127516160
swp   /BI0/F0CCMAWDD2   1   PRIMARY   0   0   less than   NULL   NONE   72057613128237056
swp   /BI0/F0CCMAWDH1   1   PRIMARY   0   0   less than   NULL   NONE   72057613128957952
and so on
I got about 5000 tables .
Is there a way to delete all index on the partioned table an create a new with one script ?
Best regards
B.-D.

Do we have Table compression in Standard Edition

Similar Messages

Maybe you are looking for