Do we know if CS4 will work with Mac OS 10.7 Lion?

I wondered if anyone has heard about the potential friendliness of Creative Suite CS4 with the new Mac OS, 10.7. Anyone?

I would contact Adobe Tech Support about that.  It seems that new editions of Apple OSes sometimes lose compatibility with legacy software.  Adobe might only be able to tell you about products that are in their current lifecycle and I'm not sure if CS4 has reached its EOL (end of life) yet.

Similar Messages

  • HT1665 I have the iPhone 4S and would like to purchase docking device6. I have the Otter Box Camo case and would like to know which dock will work with the case ON. Thank you.

    I have the iPhone 4S and would like to purchase a docking device.  I have the Otter Box Camo case and would like to know which dock will work with the
    case ON.   Thank you.

    it might be better to contact otterbox to find out from them what they made it compatible with. 

  • HT4587 I bought an Airport Express from a supplier who told me I'd need at least iOS 5.4 on my iPad.  My first generation iPad is apparently up to date but the iOS is only 5.1.1.  Before I unpack the device I want to know whether it will work with this ea

    I bought an Airport Express from a supplier who told me I'd need at least iOS 5.4 on my iPad.  My first generation iPad is apparently up to date but the iOS is only 5.1.1.  Before I unpack the device I want to know whether it will work with this earlier version.

    Apple says that a minimum of iOS 5.0 is required. See the support document below. Look for Requirements on the left hand side of the page about half way down.
    Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 5.0 or later.
    https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8

  • I have some OLD software on my Mac Pro. How do I know if it will work with Snow Leopard? Currently I'm using 10.5.8.

    I have some OLD software on my Mac Pro. How do I know if it will work with Snow Leopard? Currently I'm using 10.5.8.

    Michael Wasley's link (wikidot) is as accurate as any I can find.
    It's still wise to check with the vendors' websites for compliance.
    Biggest source of problems seems to be printer and scanner drivers.
    Appleworks 6.2.9 works fine in SL under Rosetta (note; Rosetta is installed by default in Leopard - in SL you may have to select it from the optional installations).
    Check particularly with Adobe products; some you'd think should work ok suddenly don't.

  • Hp printer Officejet 6600 box indicated will work with Mac OS X 10.5; not working

    Just purchased an HP Officejet 6600 printer. Box indicates printer will work with Mac OSX v10.5 which I have. 
    CD set up is telling me I must have 10.6 or later...
    Help!

    You can download the 10.5 driver here.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • What is the oldest version of Acrobat that will work with Mac OS 10.8? I have version 6 and it does

    What is the oldest version of Acrobat that will work with Mac OS 10.8? I have version 6 and it does.

    http://roaringapps.com/apps:table

  • What Adobe Illustrator software will work with Mac OS 10.7.5?

    What Adobe Illustrator software will work with Mac OS 10.7.5?

    Hi TuBits,
    The newest version will work on it, check it here: http://www.adobe.com/products/illustrator/tech-specs.html
    Thanks!
    Ankit

  • Can anyone recommend a print server that will work with Mac & PCs?

    Can anyone recommend a wireless print server that will work with Macs and PCs ?

    Wireless has a disadvantage for many Powerbooks.  Unless yours supports 802.11g, it is not secure.  So it must support Airport Extreme on the Powerbook to have a secure wireless network.   Also many printers only support 802.11b, making matters worse, as that is not secure.  See my FAQ* on printing:
    http://www.macmaps.com/printersx.html
    Some printers have ethernet ports, which would allow you to use a Wireless ethernet bridge that is 802.11g.  Similarly you could use one on the Mac, and then you'd have your wireless printing.  Ask the printer manufacturer what might be possible.  The last thing you want is an insecure network, especially if you are at most 4500 meters/1500 feet from someone who could pick it up and log into it that you don't want.
    * Links to my pages may give me compensation.

  • Latest version that will work with Mac mini Core SOLO under Snow Leopard?

    Latest Flash Player 11 versions will work with Snow Leopard, but they say they require a Core Duo or newer processor.  What is the last stable version of FP that will work on my mom's Mac mini 1.5Ghz Intel Core Solo (running OS X 10.6.8)?
    Have searched archives and web for this and still draw a blank.  Thanks!

    Fixed it!
    I mounted it in target mode again and manually applied the 10.5.4 combo updater ad it now boots again.

  • Is there an external hard disc that will work with Mac OS10.4.11 and Windows Vista?

    Is there an external hard disc that will work with both Mac (OS10.4.11) and Windows (Vista)?

    For NTFS on Mac, there are both open-source and commercial solutions. See:
    http://www.macupdate.com/find/mac/NTFS
    For HFS+ Drivers for Windows, there is only one:
    http://www.mediafour.com/products/macdrive
    Regards.

  • Anybody know what flash player works with mac 10.5.8  Intel

    Having trouble finding flash player that works with mac 10.5.8 intel

    Go to:
    http://www.adobe.com/flashplatform/
    On the right hand side there will be a button that says Get Adobe Flash Player. Click on that and you will be taken to a page that will allow you to download the most up to date version of flash supported by your system. Then simply follow the directions on that page to install.
    -JD

  • Which browsers will work with mac ver 10.4.11

    which version firefox works with mac ver 10.4.11

    Firefox 3.6.x is the last version of Firefox for PPC Mac's from Mozilla.
    For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/
    http://tenfourfox.blogspot.com/

  • Which version of Final Cut Pro will work with Mac Book 10.75?

    I can not put Final Cut Pro 9 on my Mac Book 10.75 (Lion).
    Which version of Final Cut Pro will run on Mac Book 10.75 (Lion).
    Thanks

    Ok, first, your questions's answers:
    FCS1 had a full version & an upgrade from any version of FCP. You only need the serial # handy when installing FCS upgrade.
    Now FCS2 has TWO upgrade versions: one was for FCS1 ($499), the other was from any version of FCP ($699).
    NOTE: Academic and Not-For-Resale (NFR) versions are not eligible for upgrade.
    http://gizmodo.com/252425/apple-rolls-out-final-cut-studio-2-first-impressions
    Here's something else to consider: with the march away from the PPC as a whole & your upgrade cost to FCS3 is $299, I would be very careful how much you spend for the older copies.
    If FCS1 or 2 is too hard to come by or cost what it did originally (or more), you may want to consider picking up a (used or new) Intel Mac with ATI or Nvidia graphics. even the newest mini might surpise you & get you by until you can afford something else.
    Good luck!

  • Does anyone know if Typekit will work with Joomla projects?

    If so - can you advise me where to install the code? Or what the options are? What your experience was like.
    Thanks.

    IMO the latest version of SQL Developer working with GeoRaptor is 3.2:
    I'm using this combination (in german language) with no problems.
    Hope this helps!

  • Can anyone recommend a solid, cheap mono laser printer that will work with Mac OS X?

    I'm currently looking for a cheap, no-frills printer. So far, most are incompatible with Mac OS X or are too expensive to buy and run.
    Does anybody have any recommendations?
    Thanks!

    I've been interested in this for some time and it all seems rather difficult. I had a Samsung ML-1610 mono laser before I bought my iMac three years ago. It worked fine with a Windows 98 laptop and was cheap and I think a bit of an out of date model then. When I bought the Mac one thing that worried me was - would the printer work? Discovered ML-1610 is not Mac compatible at all (officially). Searching for some time found various suggestions to make it work. The simplest was to download driver for ML-1710 and yes it DID work and still does. I even bought a replacement toner cartridge. Samsung mono laser printers are very good value but seem to be NOT very Mac friendly, even the models that are Mac compatible. It is too risky to get involved with models that are not on the Mac drivers list. Also not too happy about models that have Gutenprint or CUPS drivers. Yes, I believe Brother is quite Mac friendly, don't know how cheap. Mac showrooms don't have cheap mono laser printers, the style just isn't right, but they are great. I would never go back to an inkjet.
    http://jstsch.com/post/samsung_ml1610_and_snow_leopard
    www.samsung.com/nl/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_m dl_cd=&prd_mdl_name=ML-1710

Maybe you are looking for

  • US TouchPad Working in Europe

    I will be heading to France and Germany with my TouchPad and need to find out if I need a converter or just an adapter. My other devices (laptop, smartphone and another tablet) convert the current so the adapter is fine. Just want to make sure I don'

  • Mail crashes every time I try to type in the address bar

    Every time I try to type in a email address ( To , CC, BCC) mail crashes. I have tried reinstalling mail form the SL disc , but it still dose it HELP!!!! SOOOOOO annoying Using Mail 4.2 and OS 10.6.3 on both macbook pro and 21"Imac Thank you for the

  • Reservation problem with DAQmx

    Hi there, I'm using LV 8.5.1 and a NI USB-6210 Device. In a small app I want to generate two dig. signals, configured in one task. After configuration the task an error occures at "DAQmx Start Task.vi" with error code 50103 Device is reservated, can'

  • Nikon D70 moiré

    Greetings everyone, I have recently decided to give Aperture a try with a couple of my D70 raw shots and noticed that almost all of the ones I tried had problems with moiré, some of them quite severely. The same RAW files look fine when processed in

  • Avilibality check if date is nt confimred but have to deliver

    dear gurus, i want if item is avilable nt tdy according to scheduleline date its in future but i want to deliver tdy how can i do it plz provide me the detailss settings?