Do we need a SAP PI system to use SAP SRM enterprise services?

Hi,
I am working in a project where we need to use some enterprise services like ([Maintain Purchase Request|http://wiki.sdn.sap.com/wiki/display/ESpackages/MaintainPurchaseRequest]) for SAP SRM 7.x. We have an ECC 6 system also in the landscape but the middleware is a non-SAP one. My question is that to be able to use the SRM and Enterprise Services, do we need SAP PI or SAP CE in place. Any help or useful clue/pointers is appreciated.
Best regards,
Nilay

Hi Jesse,
Please refer to my blog for the details.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/06/13/transfer-of-central-contract-from-srm-to-ecc-using-web-services-without-pi
Regards,
Naveen

Similar Messages

  • Connect BO to SAP-BW system without using SAP Intergation Kit.

    Hi All,
    How Could we connect and do reporting in BO from SAP system without installing SAP INTEGARTION KIT ??
    Like we could read data from Oracle by simply creating a Oracle connection in Desiger and all the tables are visible at universe level.
    Do we have any such metod where SAP INTEGRATION KIT NOT comes into picture. and we could either read SAP tables or cube at Designer level or at reportr level.
    DO We have any Guide or document or way were we would not use SAP INETGRATION KIT .
    Thanks !!

    Hi,
    Try this .. not sure i hope it will help
    http://edocs.bea.com/wls/docs90/jdbc_drivers/oracle.html
    http://support.businessobjects.com/documentation/product_guides/planningxir2/en/xir2_Oracle_Setup_Guide_for_BusinessObjects_Planning_11.20_en.pdf
    Regards
    Ashwin

  • Connect of 2 SAP BW systems to  one SAP Enterprise Portal

    Hi!
    I have 2 SAP BW systems that should be integrated into SAP Enterprise Portal.
    I currently have already one SAP system entry "SAP_BW" within SAP EP.
    Questions
    Is it possible to define second entry for second SAP BW system in order to use 2 SAP BW systems with one SAP EP in parallel?
    Where can I find appropriate documentation?
    Thank you very much!
    regards

    Hi,
    We have a pilot portal with BW DEV, QAS and PRD connected to it.  So it is possible.
    It may be more appropriate to post this in the portal forum to get expert advice.
    Mathew.

  • Copy BEx Query from one SAP BI system to another SAP BI system?

    Experts please help me to Copy a BEx Query from one SAP BI system to another SAP BI system?
    Thanks in Advance.......

    HI,
    Just assume like below,
    you are creating your query in Development server(BI),
    Before creating query, you go to SE09(t code), here you create a workbench request by clicking the create button.
    Give some description here to be identified by you in future.
    Now a requested will be generated(ex: DW5K50098) with prefix of your server name.
    now you go to query designer, you create query, when you save the query, it will ask you request, now you click button 'own request'. you choose request(create by you in SE09).
    it will be saved under this request, now you will have one more request under your request in SE09
    parent request(DW5K50098) and child request(DW5K50099).
    First you click child request and relese(click lorry button in se09),second you click parent request and lorry button.
    next steps will be related to your organization, you can ask your team leader, he will be taking care of it.
    Regards,
    Ranganath.

  • How to upload data into SAP BW Info Objects using SAP XI

    Hi,
    I need to upload master and hierarchy data into SAP BW Info Objects using SAP XI as EAI.
    Can anyone suggest me the best solution to do it.
    Thanks in Advance,
    Volker.

    Hi! Have you not checked the BW-XI Integration document? It is available on the main page of the SDN section for XI. Almost all the steps for the integration are there...

  • Need help in developing mobile app using SAP

    Hi
    I have a team of Android, iOS and Windows developers and we are planning to start developing mobile using SAP and SAP Fiori. Need help in getting started with SAP mobile development like i need plugins and development kits that i need to use.
    Thanks
    Ram

    Hi,
    What help needed ?
    For SAP Fiori  Use this link : http://scn.sap.com/docs/DOC-41598
    For SAP Fiori Installation and Configuration Steps: http://scn.sap.com/community/mobile/blog/2014/06/10/fiori-technical-installation-and-configuration-of-one-app-from-a--z
    Which Software you will use to  develop Mobile Apps in SAP Platform ?So that i will suggest what to do ..
    Regards
    Lokesh

  • Loading two different SAP BW system from one SAP R/3

    Hi all,
    is it possible to load the data from one SAP R/3 4.7 to two different SAP BW systems in parallel?:
    A) BW 2.1C
    B) BW 3.5
    I mean not because R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side.
    Are there any other restrictions? Ar there any workarounds how to hande this situation?
    Thanks,
    m./

    Hi dear,
    I think you shouldn't have any problem!
    Look at OSS Note 775568 'Two and more BW systems against one OLTP system' to have more details...
    "R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side"...what's your plug-in version in R/3 ? I can't understand what do you mean with "R/3 Plug-In installed on BW side" !!!
    Hope it helps!
    Bye,
    Roberto
    ...and please don't forget to reward the answers...it's THE way to say thanks here, my dear colleague !

  • Need help with Signature on Checks using SAP SCRIPT

    Hi,
    I am looking for some help on how to get the Printer Resident Singature on to the Check using SAP Script. We have a HP Laser 8150 Priter in which the Chip Contains the Signature ( Printer Resident Singaure ) and currentlly the ORACLE application is able to print this signature on the checks. Right now we are in Migration to SAP and we are trying to get this Signature to print on the Check using SAP Script.
    Please help us.

    There are many ways to do this, the simplest way to print the signature is using HEX ENDHEX command.
    1. Print the Printer font list from the printer configuration menu, Find the signature in the font list, next to it there'll be esacape sequence in ASCII and Hex format.
    2. Add the following command in the window of the signature:
    /: HEX TYPE PCL
    /= Enter the Hex escape sequence(begins with 1B) from first step
    /: ENDHEX
    Regards
    Sridhar

  • Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

    Hello,
    We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
    1.Should we go for customization of services completely,so that it would fulfil our requirement.
    2.Are there  standard Enterprise Services exists which would we give us data in range(all records).
    If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
    Thanks & Regards,
    Divya.

    Hi Vaibhav,
    Let me tell you the objective in detail.
    Objective.
    To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
    This will consist of following major components:
    OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
    Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
    Enterprise services is an SAP utility to communicate with SAP.
    AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
    Fusion middleware is being used to develop application interfaces following AIA standards.
    Tasks at stake:
    Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
    Technical work of developing middleware using Oracle Fusion
    From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest  consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
    Thanks & Regards,
    Divya.

  • How to connect 2 SAP BW systems to one SAP BO?

    Hi
    Two companies from the group I'm working for wants to connect their BW system to corporate BO system.
    BW system are independent of each other. My concern is about SSO authentication.
    Will it be any problem to configure SSO between BO and BW if 2 BW systems are defined there?
    Does any one face this kind of lanscape challenge before?
    Any other issue should I be aware of?
    Thanks

    There are different possibilities.
    Since you are saying that you already have a connection with SWIFTNet (Make sure you also have a Swift Alliance Gateway account without which you will not be able to post messages to SWIFTNet.), I assume that you also have the SAP BCM in place.
    Now if you want to place a message via FIN/FileAct, you can write a custom program to create a file that is in line with the Swift standards. You can find the details of the file formats, etc.. from the SWIFT site. For FileAct, additionally you will have to create a .par file along with the .FTA file. This is for the FTA to understand the parameters.
    Once that is done, you can place the files in a folder and configure the FTA to pick up these files. This is for FileAct.
    For posting messages via FIN, you can have another program to post these files to SAG (SAG supports web services) via SOAP.
    Hope this helps.

  • Need advise on dual systems to use fcp and logic

    i just got a imac 27" i7, 12Gb ram, 1TB HD and 1GB vRam.
    i was using a imac 20" Core 2 duo 2.33Ghz, 1TB HD for video,
    On this machine i ran FCP studio, FCP refuses to boot on the same machine with some of my 3rd party plugs in Logic.
    So i then went to the macbook pro17 2006 2.33 GHZ with a 500GB HD for audio.
    On this machine i ran pro tools, logic etc
    now i wonder what the best solution is with the imac, like if i can somehow install one of these as a virtual machine or dual booth partition, i would rather run them at the same time since i switch between often., if the imac is fast enough to i hope., anyone have ideas?  will vnware or parralel work out well?
    any advise appreciated, seriously
    Cheers

    It is not advisable to relocate the sounds that came with LP to an external drive. LP uses a certain hierarchy in the order it looks for sounds. LP "expects" certain sounds to reside in a certain place.
    You should move all your Akai, EMU and other sounds that are visible to you, to your external drive. Use aliases in the original folders on your internal HD. You can also do this with your user-created Apple Loops.
    Try to keep around 20% of your internal HD space free.
    After you moved your files, use Project Manager to scan all your drives and organize your files and directories.
    Under LP > Preferences > Global > Project Manager, check "Load Project Manager database on program launch" and select "Search files using: Project Manager database", or "Search files using: Project Manager database and Search Engine".
    Your EXS24 files will load like a charm.
    sonther

  • HOW SAP SUPPORT WINDOWS CE USING SAP WEB CONSOLE

    Dear Experts,
    I am implementing WM RF through SAP web console.
    During assign functions keys (ex: F2-enter , F3-back etc.,) i am  able to mapping windows mobile device. But same function keys i can't maping windows CE device.
    If any once can answer really great help.
    Regards,
    Narasimha

    Aditya,
    The requirement is little confusing to me. Do you have a J2EE application running in WebSphere portal.
    The question is, do you want to create users using Java UME API on web sphere portal or SAP Portal?
    If is Whespere Portal, As lawrence suggested , you have to use Java UME API whith LDAP Connector object and then develop the user interface.
    SAP Portal: You already have UME user interface to create users in sap portal, if this doesn't meet your requirements you can write your custom UME application to create users , since your are writing and deploying this directly in SAP Portal, sao portal has built in LDAP connection setup and you no need to create connector.
    Thanks
    Krishna

  • Creating BO or Crystal reports using SAP - R3 - Possible?

    Hi,
    Is it possible to create Business objects or crystal report with just SAP R3 system (without using SAP BW)?
    Thanks in advance
    Regards,
    Subbu S

    Hi,
    In latest release in BOXI3 we have option BO and SAP integration kit.whilt installing you need to install this integration kit i.e. how we are installing Deski and designer.
    Once you have install this option we can directly use SAP R3 source and we can gentrate reports and we can use SAP R3 source table in to universe desing and we can design universe. Once universe desing done we can use this universe for report creation.
    Thanks
    Vivek.K

  • How to implement SSO to non-SAP systems using SAP logon ticket?

    Hello,
    We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
    Can anyone please give me some leads on this, in particular:
    1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
    2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
    3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
    Roy

    Hi,
    I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
    There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
    I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
    In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want  to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
    There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
    Here are some links you might want to check:
    OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
    wss4j: http://ws.apache.org/wss4j/
    shibboleth: http://shibboleth.internet2.edu/
    opensso: https://opensso.dev.java.net/
    On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
    Hope this is helpful...
    Let me know if you need further assistance on this topic
    Cheers

  • Extract Tables/views into ECC 5.0 SAP system from Non-SAP system

    Hi,
    I am looking for some inputs on how to set up the following scenario of extracting data stored in tables/views in a non-sap external system into my SAP ECC 5.0 SAP database.
    Currently we are using a middleware between SAP and the external system to fetch data. I would like to get rid of the middleware and set up a scenario to call this non-sap external system and pull data stored in views into our SAP system directly. Is that possible in SAP version 5.0? If yes let me know the steps to be performed... do I need to set up XI ?

    maybe you can access sap data using some connector such as java or .net connector.

Maybe you are looking for