Do we Need Logical System to be maintained for server to server distributio
Hi all,
I need to distribute the IDocs from R/3 system to a newly configured XI System or Server.
I requested to create a Logical system to my R/3 system and to assign that logical system to R/3 client and got it done.
But in the transaction code BD64 it is asking for reciever logical system.
My problem is, Can we create logical system in XI server and assign it to XI client?
Can we maintain that logical system in R/3 system?
If not what should be given as reciever logical system.
Thanks in advance,
Gangolu.
You will have to create your logical systems in R/3 only for both R/3 and XI. You don't have to do anything in XI.
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved.
Similar Messages
-
How configure a Logical System (XI) as receiver for an Outbound Idoc?
Hi all,
How can I configure a Logical System (XI) as receiver for an Outbound Idoc?
Points will be given,
Regards,
Danielahi,
it all depends on what kind of document you need to send to XI
if you want to send some logistic documents (like orders, deliveries etc)
have a look at my book - where you will find step by step guides
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
then you will undestand where to change to get it send via LS
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Logical System Name is defined for which type of Business Sytem
hi
Can some one helps me on this question and explaination.
Logical System Name is defined for which type of Business Sytem ?
a.Third Party
b.Web AS java
c.WebAs abap
d.Standalone java
Thanks
ChandraHi ,
Logical System Name is defined for the Business System type WebAS ABAP.
It is used in ALE scenarios when exchanging IDOCs between the particular system and XI. The IDOC adapter will pick up the information from the SLD and it can then be used in the configuration in the Communication Channel (Adapter Specific Identifiers).
Refer to this How-To Guide for more info
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Regards
Manish -
Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards UgurThere are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R -
Define Logical Systems and Template Names for BW Reports
Hi experts
I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
sds.
JavierHello Muthu,
BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
You might to activate the corresponding datasource of this in SRM.
And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
Regards,
Pavan -
SYSTEM MONITORING PLUG-IN FOR MICROSOFT SQL SERVER - Licencing Cost
Hi,
We have license for Oracle 10g OEM. We are planning to implement SYSTEM MONITORING PLUG-IN FOR
MICROSOFT SQL SERVER. Do we need to Buy separate license for this Plugin.
RiteshOn <http://www.oracle.com/us/corporate/pricing/price-lists/index.html> in the technology pricelist
check for "System Monitoring Plug-in for Non Oracle Databases" -
Distribution system for logical system not correctly maintained
Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
I fill in the fields for
Plant -> 001
Material -> T-HV200 (Ice Mix)
At the top I have to enter a "optimization system".
I chose the logical system I created (CE6CLNT850) from a list.
After I hit the execute button it says:
"Distribution system for logical system CE6CLNT850 not correctly maintained."
The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
Componentsystem CE6 SAP R/3 4.6c----
CE6CLNT850
NX7CLNT800----
NX7CLNT800,No Short text exists
LOIPRO----
Production order
What is the problem here?
And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
best regards,
LunatikkThanks for your answer,
the RFC destination is configured correctly. It says that the connection works when I run the test.
I'll post it in an other forum as you suggested but I have another question:
You said that it is possible to have 474 logical systems configured on the system.
1. Who defined those systems and why?
I am the first one in my company using this system.
We ordered to a SAP system through RAC Service.
I thought we would get a "fresh installation" of the SAP system -
2. please correct me if I'm wrong.
For example there are logical systems with names like "boon software" and "camstar", which are real companies.
There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible? -
Multiple Logical Systems in Partner Profile for one instance
Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System? If it is possible, can we create Logical System with respect to Plant/Country?
I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias -
Help need to generate table table maintainance for one table
Dear SAP Gurus,
Am not a ABAP consultant, currently we have some requirement to maintain some values for custmized table "ZXXXtable", when i checked in SM30 this table is not supporting to maintain.
Now We are trying to gerenate for table maintaince using in SE11 --> Utilties --> Table maintainace Generatore and
but in this screen it is asking function group and packge.
What is this function group and packge,
How to maintain this gunction group and package (or) how can I check for this table function group and package is maintained.
(or) shall we use other function group and package which is already existing in the system.
Please help me to solve this isse.
Thanks & Regards,
MKHi PXG,
this is production system we cannot able to create, shall we use the existing one which is already available under same package, I have checked 4 function groups are available in the same packing , but that function groups belongs to some other table or i don't know some other purpose.
Please help to how can i maintain the table with out creating new function group.
First could please explaing what is the use of function group?
Thanks & Regards,
MK -
New to sap - need help in configure backup strategy for SAP XI server.
hi gurus
being a netweaver guy, recently i have been given the responsibility of few basis activities.like database backup.
can any one tell me clear procedure to take both daily online and weekend full offline backup of oracle in to disk first and then to tape. i have seen in the internet material few discussing about brbackup and few about sap DB13. i am totally confused which one to use, and which is good. please help
akhilHi,
welcome on board as SAP Netweaver guy,
don't be confused both DB13 and BRtools are the same both of them will call brbackup.
to configure the brtools you have to change in your brtools profiles located at %ORACLE_HOME%/dbs
please before changing any thing take backup from that folder.
- to take the backup to disk then to tape you will need extra backup software, because using the SAP slandered tools you have to select either Disk or Tape.
Thanks
Sherif -
The System Monitoring Plug-in for Microsoft SQL Server
Hello all,
I have EM 11g monitoring all of my Oracle dbs - love it.
I am playing around with SQL plugin and wanted to know a few things:
1. does this need to be licensed
2. does the plug in monitor the actual databases or just at the instance level (performance of the engine only)
3. I was able to add the plug-in and everything seems good to go until i got to the following step in the documentation:
Adding Instances for Monitoring
Follow these steps to add the plug-in target to Grid Control for central monitoring and management:
+1.From the Agent home page where the plug-in was deployed, select the Microsoft SQL Server target type from the Add drop-down list, then click Go. The Add Microsoft SQL Server page appears.+
for the life of me, i can't figure out where to find the "Add drop-down list". Please help.!Yes it needs to be licensed
Regards
Rob
http://oemgc.wordpress.com -
Need Opinions on Connect-time failover for Oracle Parallel Server
Has anyone had any experience using the (failover=on) setting in TNSNAMES.ora file?
Specifically has anyone had any issues using this feature from a JDBC application?
Horror stories? Good news? Anything?
Thanx....Should I need to put this on Metalink?
-
Need help trouble shooting Database Gateway for MS SQL Server setup, getting ORA-28546 error
Dear All,
I am trying to setup Oracle Database Gateway for MS SQL Server(I don't have admin access to the MS SQL Server). When I try to test the dblink connection, I get the following error.
I issued select * from dual@xyz;
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=dg4msql)))
ORA-02063: preceding 2 lines from xyz
28546. 0000 - "connection initialization failed, probable Net8 admin error"
My setup is the following.
1. Oracle 11gR2 running on Oracle Linux 6, the same version gateway is installed on the same server, but different home directory.
2. Oracle DB home directory is /u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is /u01/gateway.
3. I use the same listener.ora file for both the db and the gateway.
4. the contents of my listener.ora, tnsnames.ora and the initdg4msql.ora are below.
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
#(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
mssql =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=db.abc.com.tw)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME=orcl)
SID_LIST_mssql =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ENVS=LD_LIBRARY_PATH=/u01/gateway/dg4msql/driver/lib:/u01/gateway/lib)
(PROGRAM_NAME=/u01/gateway/bin/dg4msql)
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.abc.com.tw)
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
/u01/gateway/dg4msql/admin/initdg4msql.ora
HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=255
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
dblink was created using statement below.
CREATE DATABASE LINK "xyz.abc.COM.TW"
CONNECT TO SA IDENTIFIED BY
USING 'dg4msql';
Couple more things, that I have done to check the work above.
[oracle@db admin]$ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=61 time=7.61 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=61 time=7.41 ms
^C
--- 192.168.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1818ms
rtt min/avg/max/mdev = 7.417/7.516/7.615/0.099 ms
[oracle@db admin]$ tnsping dg4msql
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:53:11
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
OK (0 msec)
[oracle@db admin]$ lsnrctl status mssql
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:54:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias mssql
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 11-SEP-2013 10:09:46
Uptime 0 days 0 hr. 44 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/db/mssql/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Obviously, I would like to get this setup to work, but I also have couple other questions regarding this setup.
1. When installing the gateway, it asks to run the root.sh script. the root.sh script as for the following.
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
is the above answer correct?
Thanks for reading.Dear Klaus,
I did start a new SQL*PLUS session
The output of /u01/gateway/bin/dg4msql is
[oracle@db log]$ /u01/gateway/bin/dg4msql
Oracle Corporation --- WEDNESDAY SEP 11 2013 14:45:06.604
Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with
Oracle Database Gateway for MSSQL
The output of env is
HOSTNAME=db.abc.com.tw
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
ORACLE_UNQNAME=orcl
TMPDIR=/tmp
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=db.abc.com.tw
MAIL=/var/spool/mail/oracle
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/sbin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HISTCONTROL=ignoredups
SHLVL=1
HOME=/home/oracle
TMP=/tmp
LOGNAME=oracle
QTLIB=/usr/lib64/qt-3.3/lib
CVS_RSH=ssh
CLASSPATH=/u01/app/oracle/product/11.2.0/dbhome_1/jlib:/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/jlib
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
G_BROKEN_FILENAMES=1
_=/bin/env -
Need to write start up scrits for weblogic admin server on Linux
Hi,
I am new to weblogic i have Installed wls1035 on Linux Created Managed servers,but i want write start up and stop scripts for weblogic admin server please let me know how to write.
My weblogic server is Running on Linux..please help me its very urgent for me.....Put something like this into a startAll.py file (excluding the ---):
startNodeManager(verbose='false',NodeManagerHome=localWlsHome + '/common/nodemanager',ListenPort=5556,ListenAddress=localhost)
nmConnect('weblogic','password','localhost','5556','domain_name')
nmStart('AdminServer','/path-to-domain-dir')
nmStart('my_server_1','/path-to-domain-dir')
nmStart('my_server_2','/path-to-domain-dir')
nmDisconnect()
exit()
source /path-to-domain-dir/bin/setDomainEnv.sh
$JAVA_HOME/bin/java weblogic.WLST startAll.py
Similar for stop (stopAll.py):
nmConnect('weblogic','password','localhost','5556','domain_name')
nmKill('my_server_1')
nmKill('my_server_2')
nmKill('AdminServer')
stopNodeManager()
exit()
source /path-to-domain-dir/bin/setDomainEnv.sh
$JAVA_HOME/bin/java weblogic.WLST stopAll.py
You might have issues with the Nodemanager having an autogenerated username and password. That can be fixed like this:
In the AdminServer console, click on Lock & Edit
In the AdminServer console, go to <domain> -> Security -> General -> Advanced and update the Node Manager username and password to use the same values as the WebLogic server.
In the AdminServer console, apply the changes.
Start WLST: $WL_HOME/common/bin/wlst.sh
Connect to the AdminServer: connect('weblogic','password','t3://<adminserver-hostname>:<adminserver-port>')
Enroll: nmEnroll('/path-to-domain-dir')
Exit WLST: CTRL^D
You might also look into customizing the nodemanager's property file:
Edit $WL_HOME/common/nodemanager/nodemanager.properties
StopScriptEnabled=true
CrashRecoveryEnabled=true
StartScriptEnabled=true
For further reading, please take a look at: http://docs.oracle.com/cd/E15051_01/wls/docs103/config_scripting/reference.html
Edited by: 925121 on Apr 3, 2012 2:16 AM -
Dear Experts,
I need to generate JVRD condition idoc using FV13 for a new site for some articles.JVRD condition is maintained in SAP.But when i try to send the condition type using the above t-code it generates no Idoc and shows me the message
Segment is not intended for reciever LS_E111. However for other stores its running f9.Do i need to maintain or define Logical System 'LS_E111' some where for this new site? I hv already checked in WE20 for partner profile .Pls helpHello,
I'm not familiar with JVRD. Have you checked the receiver port in WE21 and SM59? You can find the receiver port in WE20 outbound parameters
Regards,
Michael
Maybe you are looking for
-
How to avoid Conformed Audio in CS5.5 for large files?
I have been an avid hater of the conformed audio files since they were introduced. It's not like my 8 core computer can't mix audio in realtime. Please Adobe is there ANY way to avoid them? What about for AME? there is no realtime playback in AME so
-
Please help!! Can't find "simulate download" in flash cs4 educ. edition
Hi there, Would someone pls help me on this one? I have the education edition of CS4 Flash pro and I can't find the simulate download/bandwidth profiler anywhere in the "View" menu where it is supposed to live. Is it hidden somewhere, or is it not
-
Hi, I have a MacBook Pro 2007, and I use some external drives as I do a lot of music recordings. So far I used three USB and one Fire Wire 800 device. When I added another Fire Wire Disc (Seagate 1T) in chain with the other Seagate through the Fire W
-
AP Document Tax Date in Check PLD
The A/P Document TaxDate is not available in the Check PLD. This is to request the creation of a system variable to make available this date.
-
Hello, does anyone get a FOP integration to work within a BC4J application (Jdev 9.0.3)? My issue: When starting my PrintProcess class from a stand-alone class(static void main) everything works fine (incl. creation of a PDF document). The same metho