Do we need SAPCCM4X for SMD?

Gurus:
I am not sure whether SAPCCM4X is needed for SMD.
i have checked my SMD training material and only SMD/IS agent are mentioned.
Would you please share your experience?
Thanks!

Hi
Basically Solution Manager Diagnostics required for SAP Web Application Server JAVA Stack in your SAP Solution.
so if your landscape has only Java related componets like : SAP Enterprise Portal, SAP Exchange Infrastructure, CRM Internet Sales, mySAP ERP Employee/Manager Self Services you requrie only SMD.
But if you goes to monitor CRM, XI systems sapccm4x has to be installed.
I would like to direct you the FAQ page of smd [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4e49dbea-0c01-0010-91bd-f0b61388c9ae|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4e49dbea-0c01-0010-91bd-f0b61388c9ae]
and the detail supportive guide about SMD
[Supportability Setup Guide for Solution Manager Diagnostics|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5eadd4fb-0701-0010-b7ab-e4becf029f0e?quicklink=index&overridelayout=true]
Thanks,
Jansi

Similar Messages

Unable to resolve error while creating a maintenance project for SMD

Hi,
I am getting an error when I try to create a maintenance project for SMD 331- SMD 341 - SMD 351 systems.
( SMD 331- Development, SMD 341- Test, SMD 351- Production ) SMD is 4.0 upgraded system.
Detailed description of the problem:
In SOLAR_PROJECT_ADMIN, I select a newly created project
GS_SMD3513 and in tab 'System Landscape', go to tab 'Change Requests', here when I do consistency check
I get following errors
1. 'No consolidation system found for SMD-331 (project GS_SMD3513)'
2. Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for SMD-351
3. Error reading information for number range object /TMWFLOW/D
The transport route between SMD331- SMD341- SMD351 is available as any transport request created in SMD 331 can be successfully imported to SMD 341 and SMD 351.
I need help to resolve these errors.
Edited by: Dipti Sawarkar on Jan 7, 2008 6:41 AM

Hi Patmol,
Have you tried to go to the previous or next timesheet and then navigate with the "previous period" or "next period" to the timesheet in question.
Also have you tried to open it using a delegation session?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Need Information on SMD tool

Hello SAP Guru's,
                           Need information about Share Master Data(SMD) tool.
                           1) What is SMD tool?
                           2) What for SMD toll used?
                           3) How to use SMD tool, for change pointer in ALE(Application Link Enabling) ?
                           4) How to configer SMD tool?
Give the needfull solution to solve the issues.
Regards,
Sateesh J

Hi chek this
Distributing Master Data Using the SMD Tool
http://help.sap.com/saphelp_nw04/helpdata/en/78/2178da51ce11d189570000e829fbbd/content.htm
Award if helpful.

Need Suggestion for Archival of a Table Data

Hi guys,
I want to archive one of my large table. the structure of table is as below.
Daily there will be around 40000 rows inserted into the table.
Need suggestion for the same. will the partitioning help and on what basis?
CREATE TABLE IM_JMS_MESSAGES_CLOB_IN
LOAN_NUMBER VARCHAR2(10 BYTE),
LOAN_XML CLOB,
LOAN_UPDATE_DT TIMESTAMP(6),
JMS_TIMESTAMP TIMESTAMP(6),
INSERT_DT TIMESTAMP(6)
TABLESPACE DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
LOB (LOAN_XML) STORE AS
( TABLESPACE DATA
ENABLE STORAGE IN ROW
CHUNK 8192
PCTVERSION 10
NOCACHE
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
NOPARALLEL;
do the needful.
regards,
Sandeep

There will not be any updates /deletes on the table.
I have created a partitioned table with same struture and i am inserting the records from my original table to this partitioned table where i will maintain data for 6 months.
After loading the data from original table to archived table i will truncating the original table.
If my original table is partitioned then what about the restoring of the data??? how will restore the data of last month???

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

I am locked out of my iPad, I can't back it up because it won't connect to iTunes (because it's locked with a password) and I need it for school, it has all of my school work on it and the school doesn't have or passwords. PLEASE HELP ME!!!

I am locked out of my iPad 2, I can't back it up because it won't connect to iTunes (because it's locked with a password) and I need it for school, it has all of my school work on it and the school doesn't have or passwords. I can't loose all of my work. PLEASE HELP ME!!!

Hi ebby,
Here are the instructions for a disabled device - hopefully you have sync'd with your computer before now?
http://support.apple.com/kb/HT1212
Good luck!
Cheers,
GB

Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX and Windows 7. I need it for my MacBook Pro 13", 2012, running Mountain Lion

Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX Mountain Lion and Windows 7. I need it for my MacBook Pro 13”, 2012, running Mountain Lion & Windows 7 Ultimate - BootCamp. I’ve heard that the Buffalo MiniStation Encryption does not work with OSX, is that true..? I'd like it to work with both operating systems, using the built in hardware encryption. Thanks

This article may help: A flashing question mark appears when you start your Mac.

I have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

You need to get headset splitter adapter.
http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I need to free up room on my computer. As of now, I can't even load updates. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please!

I agree with Kappy.. passing files and especially via wireless is slow as slow.
Just need to be sure your TC is the new AC model??
And the OS on the computer is Lion?
Have you completed the setup of the TC via the utility? You do still need to get internet via the TC so it has to be plugged into the main router..
Give us the full picture of the network.
Then we can help you get into it.. whether you should put your files on it is another question.

I need driver for ati switchable graphics 4250/6370 on windows 8

The video driver in HP is only for windows 7, and in the Ati webpage is only for one graphics card and not for switchable mode under windows 8, please i need drivers for the hp dv7 4267cl model.
i have three notebook of this model for software developers, i need update. any suggestion?
Graphics card: ATI 4250 / 6370 switchable
Notebook model: DV7 4267cl

Hello HK_Ariel,
Thank you for posting on the HP Forums!
I understand you are looking for a WIndows 8 ATI driver for your computer. This driver does not exist, as you indicated. You would need to return the computer to Windows 7 to use the switchable graphics.
Mario
I worked on behalf of HP.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

If I want to put windows7 on my Mac,do I need software for a new comp. or a refurbished?

If I want to put windows7 on my Mac,do I need software for a new comp. or a refurbished one?

Mikestoyzz wrote:
Looking on eBay,the software is labeled for new or refurbished.i'm putting it on through boot camp.
With my limited knowledge, I don't think that it matters.

Need suggestion for designing a BEx report

Hi,
I need suggestions for designing a BEx report.
Iu2019ve a DSO with below structure:
1. Functional Location u2013 Key
2. Maintenance Plan u2013 Key
3. Maintenance Item u2013 Key
4. Call # - Key
5. Cycle u2013 Data Field
6. Planned Date u2013 Data Field
7. Completion Date u2013 Data Field
This DSO contains data like:
Functional -
Plan --- Item -
Call# --- Cycle -
Planned Dt -
Completion Dt
Location
11177 -
     134 -
     20 -
     1 -
T1 -
     02-Jan-2011 -
     10-Jan-2011
11177 -
     134 -
     20 -
     2 -
T2 -
     15-Feb-2011 -
11177 -
     134 -
     20 -
     3 -
T1 -
     15-Mar-2011 -
11177 -
     134 -
     20 -
     4 -
M1 -
     30-Mar-2011 -
25000 -
     170 -
     145 -
     1 -
T1 -
     19-Jan-2011 -
     19-Jan-2011
25000 -
     134 -
     145 -
     2 -
T2 -
     20-Feb-2011 -
     25-Feb-2011
25000 -
     134 -
     145 -
     3 -
T1 -
     14-Mar-2011 -
Now Iu2019ve to create a report which will be executed at the end of every month and should display the list of Functional Locations whose Cycles were planned in that particular month, along with the last completed Cycle/Date.
Thus based upon above data, if I execute report at the end of (say) March then report must display:
Functional ---     Curr. Cycle --- Planned Date --- Prev. completed Cycle --- Prev Completed Date
Location
11177 -
     T1 -
     15-Mar-2011 -
---     T1 -
--     10-Jan-2011
11177 -
     M1 -
     30-Mar-2011 -
---     T1 -
--     10-Jan-2011
25000 -
     T1 -
     14-Mar-2011 -
---     T2 -
--     25-Feb-2011
Any idea how can I display Previous Completed Cycle and Completion Date (i.e. the last two columns)?
Regards,
Vikrant.

hi vikrant,
You can a Cube at the reporting layer which gets data from DSO and which has these 2 extra characteristics completion date and previous cycle along with other chars and keyfigures from DSO.
You can populate these based on your logic in the field routine.
Hope it helps.
Regards
Dev

Does OS Lion need flip for mac

new IMAC OS LIon 10.7.3 - can't seem to find out if it needs 'flip for mac'?

Only if you wish to view .wmv files, otherwise it's not really needed.

Do we need SAPCCM4X for SMD?

Similar Messages

Maybe you are looking for