Do we need to buy license to use Toplink in non Oracle application server?

Hi,
Can Oracle Toplink be used freely without any license required when deploy in non-Oracle internet application server?
Please advise.
Thank you.

From the TopLink FAQ: http://www.oracle.com/technology/products/ias/toplink/technical/tl10g_faq.htm#WhatDoesTopLinkCost
"Under the OTN license, TopLink is free to download for evaluation and use during development. A production license is included with all editions of OracleAS or can be licensed separately for $5K per CPU."
Your situation would require a separate license.
--Shaun

Similar Messages

Wich oracle database i need to buy(license) for oracle portal

wich is better oracle database i need to buy(license) for oracle portal (10g)

Hmmm... I'm not too sure. But we use 10.1.4.
Try contacting your nearest Oracle reseller I guess!

Is oracle bpm studio free downloadable or we need to buy license?

Is oracle bpm studio free downloadable or we need to buy license?

Hi,
Oracle BPM studio can be downloaded from the below mentioned ink.
http://www.oracle.com/technology/software/products/bpm/index.html
But I hope the free s/w is only for limited time period. You can also go for buying the license version of the Oracle BPM studio.
Regards,
Bibhu

How to license Latin American Localization (JL) in Oracle Applications 11i

Hi,
How to license Latin American Localization (JL) in Oracle Applications 11i .
Regards .

Pls check below MOS:-
How To Use OAM To License JA (Asia/Pacific Localizations), JE (European Localizations), JG (Regional Localizations) and JL (Latin-American Localizations) in Oracle Applications ? [ID 351900.1]
How to install Latin American localization? [ID 268396.1]
Also to check currently installed localization, pls check below MOS:-
NOTE:122491.1 - How can I find out what I need for a country installation- globalization 11i?
Thanks,
JD
Edited by: JD on 27-May-2011 03:28

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

Configuring Oracle Application Server to use a user friendly url

Hi All,
I am having trouble configuring the apache httpd.conf file within an applicaton server to be able to use user-friendly urls for the infrastructure identity management tools server. I also need this for security reasons as well as hardware reasons - loadbalancing.
At the moment I have a standard setup, whereby the sso application server is using port 7777. I would like the user not to enter the port, but to enter just a standard url, like http://login.<company>.com.au, so that if the user needs to modify oid using the oiddas web application, they can enter something like http://login.<company>.com.au/oiddas/ rather than http://<machine host name>:7777/oiddas/. This would also be used by portal for sso logins.
From the standard installation, Apache was configured as follows:
Port 7777
Listen 7777
ServerName <machine host name>
DocumentRoot <root document folder>
Now reading the documentation from the Oracle Application Server Installation notes for the Http Server, they document how to do this (in the loadbalancer section - this will eventually be used in the hardware setup):
Port 80
Listen 7777
Listen 80
# Virtual Hosts
# This section is mandatory for URLs that are generated by
# the PL/SQL packages of the Oracle Portal and various other components
# These entries dictate that the server should listen on port
# 7777, but will assert that it is using port 80, so that
# self-referential URLs generated specify www.oracle.com:80
# This will create URLs that are valid for the browser since
# the browser does not directly see the host server.oracle.com.
NameVirtualHost <machine ip>:7777
<VirtualHost <nameofmachine>:7777>
ServerName login.<company>.com.au
Port 80
</VirtualHost>
# Since the previous virtual host entry will cause all links
# generated by the Oracle Portal to use port 80, the server.company.com
# server needs to listen on 80 as well since the Parallel Page
# Engine will make connection requests to Port 80 to request the
# portlets.
NameVirtualHost <machine ip>:80
<VirtualHost <nameofmachine>:80>
ServerName login.<company>.com.au
Port 80
<VirtualHost>
Note that I used slightly different names for the url's rather than the oracle names www.oracle.com and server.oracle.com
Now after applying this, I noticed not only could I not go to the oiddas from the original machine name, but also couldnt go there from the new machine name.
Also I was not even able to go to the standard index page whereby you can go to the enterprise manager for the application server, from either names.
The following urls provide me with "The Page Cannot Be Displayed" error message:
http://login.<company>.com.au:7777/
http://<nameofmachine>:7777/
The following urls provide me with "Page Under Construction" error message:
http://login.<company>.com.au/
http://<nameofmachine>/
Could someone please tell me why this is the case, considering I am using the installation procedures Oracle has published within the Oracle Http Server Admistrators Guide (http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14007/netconf.htm#sthref379).
Cheers
Rodney

Hi Rondey,
Ik think that I can see your probleem.
Just change the following line at your httpd.conf, then restart the component.
First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
the second thing is just try to do the following steps
((Port 80 to Port 7777)))
Listen 7778
%%%% In loadbalancer section %%%%%%
just add the following lines
Listen 80
Listen 8103
Listen 8102
NameVirtualHost *
NameVirtualHost *:8103 or 80
If you want to use this ports (8103 or 8102) for other site (url), then
<VirtualHost *:80>
ServerName <machine ip> or (host name)
Hear from U,
Regards,
Hamdy

Can I create a file using pl/sql code in application server ?

Hi
I wanted to create a file(any kind of file .txt .csv .exe etc..) using pl/sql code in application server?
Please help me with an example...in this regard
Regards
Sa

864334 wrote:
I wanted to create a file(any kind of file .txt .csv .exe etc..) using pl/sql code in application server?And how is this "file" to be delivered?
Files can be created by PL/SQL code and stored in the Oracle database as CLOBs. This a fairly easy and robust process. It runs entirely in the database. It conforms to transaction processing. The "file" (as a CLOB) resides in the database and can thus be secured via database security, is part of database backups and so on.
The basic issue is how to deliver the contents of the CLOB to the user. If via FTP, then the database can directly FTP the contents of the CLOB to the FTP server as a file. If via HTTP, the database can deliver the CLOB as a HTTP download directly to the web browser.
If the client is Java or .Net, then the CLOB contents can be delivered via SQL or DBMS_LOB or a custom PL/SQL interface.
In such cases, there is no need to step outside the secure and flexible database environment and create a physical o/s file in the wild (outside the controls of database security, data integrity and transaction processing). This is thus recommended and is the preference.

Creating reports using oracle application server

Hello All,
I am a complete newbie with Oracle Application Server(OAS) and Oracle reports. My task is to generate HTML and PDF reports using OAS. The current application has a aspx pages(ASP.NET as front end) which calls a third party tool Fast Radar Report which fetches data as per the user need(like month, day, year, product name....) and displays it in a grid format. I have to remove the FastRadar part and use OAS's OracleAS Reports Services components to generate those reports
I went through chapter 12 of Oracle.Application.Server.10g.Essentials by OReilly 2004 edition
It briefly glances through that part. But, it seems to mention about Oracle Reports something like "Oracle Reports has a wizard-based frontend called Oracle Reports Developer that can build reports. Oracle Reports Developer is part of the Oracle Developer Suite. The reports created with Oracle Reports Developer can be deployed to the Web using OracleAS Reports Services support in Oracle Application Server."
I am unclear what to do. Do I need to create the report format in Oracle Reports using wizard-based frontend called Oracle Reports Developer and then deploy it using OracleAS Reports Services?
Or, is there a way to create the report format using OracleAS Reports Services without using Oracle Reports. I am told we have just OAS installed, don't know if Oracle reports is installed or not as it is done on a remote site.
Any suggestions would be highly appreciated.
Thanks a lot.

Hi,
One has to develop reports using Oracle Reports developer and then has to deploy it into the application server. To do so you need the Oracle developer suite installed, this has wizards which can be used to develop reports.
This link might help you http://www.oracle.com/technology/products/reports/index.html.
Mark it if it helps

Two Instances of Oracle Application Server 10.1.3.x using the same DB

I can't seem to find any documentation about installing two instances of Oracle Application Server 10.1.3.x using the same database.
Would the two instances conflict? Should I create a separate database for each instance? I am attempting to cluster two application servers and I want to know if I will need multiple databases, I can't see a reason why this would be a problem.
Any advice on this matter would be appreciated.

You have probably downloaded the wrong version.
Do not download the Oracle SOA Suite 10g (10.1.3.5.1) for WebLogic Server (10.3.1),
but the one below that option: Oracle SOA Suite 10g (10.1.3.x)
See if you get something like the following zip file: soa_windows_x86_101310_disk1.zip
This is just the OC4J without the WebLogic Server.

How to Install oracle workflow and why we need Oracle Application Server

I want to install and configure Oracle Workflow using Oracle 10g
Please help me and guide me with the process in deatial from scratch what should i need to install
Oracle Database
Oracle Application server middle tier
Oracle Content Management SDK
Also help me how can i configuer oracle internet directory because when installing Oracle application server it requires HostName and Port No.
I am a student
I know just how to install oracle database 10g
and New to oracle Application Server
Waqar Habib

The files at
http://otn.oracle.com/software/products/ias/workflow/htdocs/winsoft.html
are for Oracle Workflow version 2.6.0. Here is some information from the announcement for downloading the latest version, 2.6.3:
Oracle Workflow 2.6.3 for Oracle Database 10g is now available for download from OTN.
Please point your browsers to http://otn.oracle.com/software/index.html
Currently, the availability is limited to Windows and we are working towards availability on other platforms. I will post another message as soon as it becomes available.
The Workflow Server requires an Oracle 10g database home and the Workflow mid-tier requires an Oracle HTTP Server home - Apache Install from the Oracle 10g Companion CD. For more information please read the installation notes.

Why do we use oracle application server

I need to understand oracle application server.

Hans Forbrich wrote:
<snip>
Note that it's all about controlling costs. And they are finding App Servers have their own cost - in programming and administrative complexity.And the pendulum swings. Having started my IT career on IBM mainframes when PC's were still just a hobbyist's curiosity, it's always been somewhat amusing to me to watch the growth of the PC and how the younger generation of IT "professionals" (yes, I deliberately use the term loosely) discover, then struggle to solve, problems that were solved on the mainframe decades ago. Problems of load balancing, multi-user data access, version control, configuration control, etc. etc. etc.
I'll spare the "war stories". Just thought your comment that I retained above was a bit thought provoking - that "there is nothing new under the sun"
;-)

Need an advice in Oracle Application Server

Dear all,
I need your advice.....
What I have:
- 2 servers (Windows 2008 R2 64bit) .. planned as Application Servers
- Oracle 11g Database installed in a server
- forms (.fmx) , reports (.rdf) , compiled using Oracle 10g DS R2
- Oracle 10g Developer Suit R2
What I want:
- Install Oracle Application Server in the 2 servers available (Windows 2008 R2)
- make sure all (.fmx & .rdf) will work im these 2 servers
- take advantage of the powerful servers
What I did:
- Install Oracle 10g AS R2 in both servers
- configure webcache balance
What I faced:
- both servers worked fine except:
- (.fmx) files cannot be cached
- slow while opening (.fmx) files
- AGAIN, SLOW
ADVICE??
- Do I need to continue using this installation OR
- Is there any better installation & configuration that will help get (What I want:)
Kind Regards

Hi zzalabri,
I know i have replied it late,
Oracle Web Cache uses cacheability rules to store documents. These rules fall into two categories:
1)Rules for static content, such as GIF, JPEG, or static HTML files
2)Rules for dynamically generated content created using technologies like Java Server Pages (JSP), Active Server Pages (ASP), PL/SQL Server Pages (PSP), Java Servlets, and Common Gateway Interface (CGI).
How can I make my server caches .fmx files using webcache (( webcache is configured already but it says "URL contains query string"))..
The below link would be helpful for setting caching rules for Oracle Webcache
http://docs.oracle.com/cd/B15904_01/caching.1012/b14046/cache.htm
Is there any configuration for Application Server 10g R2 AFTER the fresh installation OR it works as it is ..
The default installation is self tuned to handle a load of approximately 200 users(it depends on network as well as ur DB)
I knew for sure what makes my server slow, that is because of background images in fmb & fmx files. when I removed them it became fast enough.
In my environment,i used to staore all this images in gif format(images size max would be 50kb)then store all these images in a jar file and load this jar file through archive_jini(Formsweb.cfg)
Hope this would be helpful,
Regards
Fabian

License Keys for J2EE-Engine_ORA SAP Web Application Server.

Hi Experts
I have installed SAP Net Weaver 04 support release 1 > oracle JAVA System. I dont have ABAP system on same Hardware so I cant used SLICENSE GUI transaction code, how I generate hardware key, I am performing installation on Windows 2003 server.
Now I want to add License Keys for J2EE-Engine_ORA SAP Web Application Server. So please give me producer for how to add license key.
Regards,
Rahul

Hi
Go to Visual Administrator in the following path:
<Your Server> --> Services --> Licensing Adapter to get the Hardware key , SID etc . Ten apply license in
https://service.sap.com/licensekeys
Once you get the license from SAP, do the following
->Download the license file to a local disk
--> Start the Visual Administrator Server --> Services --> Licensing Adapter
--> Use the Install License From File button to upload the file
--> Select the file with the downloaded license key
--> Choose Open to continue
After installation restart J2EE engine
Thanks
Prince Jose

How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP server

In 9iAS 9.0.2 Oracle HTTP Server (OHS) is pre-configured to assign requests to the Home OC4J instance via the URL-prefix "/j2ee"/
For example, the TEST servlet under OC4J would be passed through OHS using:
http://urmachine:urApachePort/j2ee/TEST
whereas in the standlone OC4J version, this URL works:
http://urmachine:urOC4JPort/TEST
How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP Server?

It is getting the url prefix from mod_oc4j.conf
under /ora9ias/Apache/Apache/conf
You can read more on this at
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a92173/confmods.htm#1008977
-Prasad

Unale to print pdf files in oracle application server using oracle forms

Hi
We are using oracle developer suite 10g(10.1.2.3.0) in Windows vista. (test environment)
Oracle application server 10g(10.1.2.3.0) in Hp-UX 11iv3 (production environment)
We are able to print pdf files in test environment from oracle forms using the below command:
host('/usr/bin/lp -d p9775hplaser '||'/ashome/output/'||:print_file);
But while declaring to the live environment it is not working
host('cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser');
but when the above command is put in hp-ux cmd prompt it is workinh"'cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser'";
Kind ly tell me whether the problem i with the host command and some other command is available for printing files from forms.

Here is my guess:
declare
AppID PLS_INTEGER;
begin
AppID := DDE.App_Begin('acroread -toPostScript '||file name,DDE.APP_MODE_MINIMIZED);
end;

Do we need to buy license to use Toplink in non Oracle application server?

Similar Messages

Maybe you are looking for