Do we need to create individual shipment document for Transportation Chain
Do we need to create individual shipment document in Transportation Chain if the forwarding agent is same for all shipment?
For Example :
first it takes truck,
then ship,
then again truck to reach Customer.
in all above case forwading agent is same eg: DHL Service
Hi Doak,
Yes you need to create individual shipment document in Transportation chain.
For Example : when the trucks go from their respective shipping points to the harbor, the freight documents should not also contain main leg and subsequent leg information. When you create texts, you would not know if they are supposed to be valid for the preliminary, main or subsequent legs.
In order to avoid such limitations, we would recommend that you denote a transportation chain using multiple shipment documents. You can create these shipment documents almost automatically by using collective processing.
If you want depict a transportation chain within a shipment document, you must also accept the limited functions available to you.
The reason: Almost all shipment document functions refer to the document as a whole:
1.Outputs can only be printed for the entire document, not for individual legs
2.Handling units can only be created for the entire document, not for individual legs
3. The same is valid for texts, deadlines in general, etc.
Hope this provides you some clarity. Reward points if helpful.
Regards
Srikanth.A
Similar Messages
-
Need to create a Change document for tracking Purpose on standard table
Hi Experts,
I am updating a field in standard table so need to create a change document for tracking the changes being done on the field.
I created the change Document with transaction SCDO but I am stuck at point - How to call that in the report program to enable the change document.
Please advice.
Thanks!!Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
TAB2 RADIOBUTTON GROUP R1,
TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
WHEN TAB1. TABNAME = 'BSID'.
WHEN TAB2. TABNAME = 'BSAD'.
WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
EXPORTING
TABLE_NAME = TABNAME
* ACTION = 'ANZE'
* WITHOUT_SUBMIT = ' '
* GENERATION_FORCED =
* NEW_SEL =
* NO_STRUCTURE_CHECK = ' '
* DATA_EXIT = ' '
* IMPORTING
* PROGNAME =
* TABLES
* SELTAB =
EXCEPTIONS
TABLE_IS_STRUCTURE = 1
TABLE_NOT_EXISTS = 2
DB_NOT_EXISTS = 3
NO_PERMISSION = 4
NO_CHANGE_ALLOWED = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
I was at Apple Store yesterday and they created a pages document for me. When I got home and tried to open it, I get a message that I need a newer version of Pages. I see the image before I push "open". The 'kind' is pages publication. The file does not appear in the 'open recent' list.
Just be careful with Pages 5, it is not strictly an upgrade.
Apple has actually removed over 90 features and some work can be very difficult in the newer version.
It was all done to make it more interchangeable with the inferior iOS version:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter -
Need to create multiple PA documents during billing
Hello,
We have the following scenario.
When we create a billing document from an SD order, we need to create multiple PA documents based on the condition types. We have maintained those condition types to different value fields in KE4I.
For e.g, for a line item in an order, we have Basic Price = 100, Discount = 20
When we do billing for the above line item, we want to create two PA documents, one for the Basic Price and one for the discount. Note that the above Basic prive and Discount are mapped to different value fields and different cost element groups.
Thank you.
BalaHi,
This functionality is not possible not does it make any sense. SD conditions are mapped to value fields via KE4I. If you have not activated summarization (tcode KE2S) then for every SD item you will get a COPA document. Each COPA document will contain all the values fields filled via the SD conditions displayed in one line item.
Imagine if you have a SD billing document with 20 items, each items containing 10 conditions. Then you will get 200 COPA documents as per your requirement !!! This does not make any sense neither from technical point of view nor from business point of view.
regards
Waman -
LSMW me51n, how to create one PR document for all the records in the file
HI all,
I need to create LSMW for t-code me51n -Create Purchase Requisition. I`m using Bapi BUS2105, method CREATEFROMDATA, idoc message type PREQCR, basic type PREQCR03. The problem is that the LSMW is creating different idoc and different PR document for every record in the source file. My requirement is to create one PR document for one source file (Every source file is different Purchase Requisition) . I`m trying to do this with writing some code(global functions ) in the 'Mapping and conversion rules' events - BEGINOF_TRANSACTION_, ENDOF_TRANSACTION__..., but i`m not very sure what exactly i`m doing .
Please help me resolve this problem, any help will be appreciated .
Best regards, Emil Milchev.Thank you for you answer.
But I have found faster way of doing it - two source structures, one HEADER and ONE ITEM.
HEADER: one empty text field and identificator for it.
ITEM: everything else.
Then everything was just fine, i`ve mapped the different IDOC segments by PREQ_ITEM fields (equal values in the source file : 10-10-10..., 20-20-20,.... etc.) and put all required fields for my LSMW
SOURCE FIELDS:
Z_ME51N_V2 - MASS_UPLOAD - CREATE create
Source Fields
UPFILE upload file
IDENT C(010) ident
Identifing Field Content: header
TEXT C(001)
UPFILE2 123
IDENT C(010) ident
Identifing Field Content: item
BSART C(004) Document type
BANFN C(010) Purchase requisition number
BNFPO_FOR_MAP N(005) Item number of purchase req. for MAPPING acc.
BNFPO N(005) Item number of purchase requisition
KNTTP C(001) Account assignment category
PSTYP C(001) Item category in purchasing document
MATNR C(018) Material Number
WERKS C(004) Plant
LGORT C(004) Storage Location
MENGE N(013) Purchase requisition quantity
EKGRP C(003) Purchasing group
KONNR C(010) Number of principal purchase agreement
KTPNR N(005) Item number of principal purchase agreement
LIFNR C(010) Desired Vendor
FLIEF C(010) Fixed Vendor
AFNAM C(012) Name of requisitioner/requester
PREIS AMT4(011) Price in purchase requisition
ABLAD C(025) Unloading Point
WEMPF C(012) Goods Recipient
PS_POSID C(024) Work Breakdown Structure Element (WBS Element)
KOSTL C(011) COST_CTR v bapito ?
NAME1 C(040) Name1 - Name of an address
NAME2 C(040) Name2 - Name of an address 2
STREET C(060) Street
DELIVERY_DATE C(008) Date on which the goods are to be delivered
TEXT C(132) item text
STRUCTURE RELATIONS :
Structure Relations
E1PREQCR Header segment <<<< UPFILE upload file
E1BPEBANC Transfer Structure: Create Requisition Item <<<< UPFILE2 123
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt <<<< UPFILE2 123
E1BPEBANTX BAPI Purchase Requisition: Item Text <<<< UPFILE2 123
E1BPESUHC Communication Structure: Limits <<<< UPFILE2 123
E1BPESUCC Communication Structure: Contract Limits <<<< UPFILE2 123
E1BPESLLC Communication Structure: Create Service Line <<<< UPFILE2 123
E1BPESKLC Create Comm. Structure: Acct Assgt Distr. for Service Line <<<< UPFILE2 123
E1BPESLLTX BAPI Services Long Text <<<< UPFILE upload file
E1BPMERQADDRDELIVERY PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPMERQADDRDELIVERY1 PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPPAREX Ref. Structure for BAPI Parameter EXTENSIONIN/EXTENSIONOUT <<<< UPFILE2 123
MAINTAIN FIELD MAPPING AND... :
the MAPPING between two IDOC`s segments:
In first segment:
E1BPEBANC Transfer Structure: Create Requisition Item
Fields
PREQ_NO Purchase requisition number
Source: UPFILE2-BANFN (Purchase requisition number)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_NO = UPFILE2-BANFN.
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO (Item number of purchase requisition)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_ITEM = UPFILE2-BNFPO.
In second segment :
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt
Fields
PREQ_NO Purchase requisition number
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO_FOR_MAP (Item number of purchase req. for MAPPING
Rule : Transfer (MOVE)
Code: E1BPEBKN-PREQ_ITEM = UPFILE2-BNFPO_FOR_MAP.
After that everything was OK . -
Need to create stupid proof templates for non-designers
Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options. -
Creating an Accounting Document for Invoice
We cannot create an accounting document for Invoice.There is no problem in account determination procedure. I've tried to clear in VFX3, but gives me an error message that says "express document 'update was terminated' received from author.
After analysis the error being reported is:
"M2 012: Error determining posting period (info structure S010).Function module is MCV_STATISTICS_UPD_V1_INVOICE V1 NORMAL
Can you suggest how we can post/Release to Accounts?Hi Narendra
Go to T-code MCVV. In this case since the doc is not created it will not work.
Is there an ST22 dump. if yes put a break point there.
Check SM13 and you can see the here where the update fails. Apply break point there.
Go to MC26 and enter S010 and check if any update rules exisit. in one of the formulas you need to put a break point.then go back to VF01 and then before you hit the save enter /h in the command box to go into debug mode.
Once in debug mode Follow the menu path Setings--->update debug on/off.Debug and see why the update is failing.
Thanks -
I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?
You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.
-
I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?
Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Need to create a driver class for a program i have made...
hey guys im new to these forums and someone told me that i could get help on here if i get in a bind...my problem is that i need help creating a driver class for a program that i have created and i dont know what to do. i need to know how to do this is because my professor told us after i was 2/3 done my project that we need at least 2 class files for our project, so i need at least 2 class files for it to run... my program is as follows:
p.s might be kinda messy, might need to put it into a text editor
Cipher.java
This program encodes and decodes text strings using a cipher that
can be specified by the user.
import java.io.*;
public class Cipher
public static void printID()
// output program ID
System.out.println ("*********************");
System.out.println ("* Cipher *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* CS 181-03 *");
System.out.println ("*********************");
public static void printMenu()
// output menu
System.out.println("\n\n****************************" +
"\n* 1. Set cipher code. *" +
"\n* 2. Encode text. *" +
"\n* 3. Decode coded text. *" +
"\n* 4. Exit the program *" +
"\n****************************");
public static String getText(BufferedReader input, String prompt)
throws IOException
// prompt the user and get their response
System.out.print(prompt);
return input.readLine();
public static int getInteger(BufferedReader input, String prompt)
throws IOException
// prompt and get response from user
String text = getText(input, prompt);
// convert it to an integer
return (new Integer(text).intValue());
public static String encode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String encoded = ""; // base for string to return
char letter; // letter being processed
// convert message to upper case
original = original.toUpperCase();
// process each character of the message
for (int index = 0; index < original.length(); index++)
// get the letter and determine whether or not to
// add the cipher value
letter = original.charAt(index);
if (letter >='A' && letter <= 'Z')
// is A-Z, so add offset
// determine whether result will be out of A-Z range
if ((letter + offset) > 'Z') // need to wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE + offset);
else
if ((letter + offset) < 'A') // need to wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE + offset);
else
letter = (char) (letter + offset);
// build encoded message string
encoded = encoded + letter;
return encoded;
public static String decode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String decoded = ""; // base for string to return
char letter; // letter being processed
// make original message upper case
original = original.toUpperCase();
// process each letter of message
for (int index = 0; index < original.length(); index++)
// get letter and determine whether to subtract cipher value
letter = original.charAt(index);
if (letter >= 'A' && letter <= 'Z')
// is A-Z, so subtract cipher value
// determine whether result will be out of A-Z range
if ((letter - offset) < 'A') // wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE - offset);
else
if ((letter - offset) > 'Z') // wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE - offset);
else
letter = (char) (letter - offset);
// build decoded message
decoded = decoded + letter;
return decoded;
// main controls flow throughout the program, presenting a
// menu of options the user.
public static void main (String[] args) throws IOException
// declare constants
final String PROMPT_CHOICE = "Enter your choice: ";
final String PROMPT_VALID = "\nYou must enter a number between 1" +
" and 4 to indicate your selection.\n";
final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
"cipher: ";
final String PROMPT_ENCODE = "\nEnter the text to encode: ";
final String PROMPT_DECODE = "\nEnter the text to decode: ";
final String SET_STR = "1"; // selection of 1 at main menu
final String ENCODE_STR = "2"; // selection of 2 at main menu
final String DECODE_STR = "3"; // selection of 3 at main menu
final String EXIT_STR = "4"; // selection of 4 at main menu
final int SET = 1; // menu choice 1
final int ENCODE = 2; // menu choice 2
final int DECODE =3; // menu choice 4
final int EXIT = 4; // menu choice 3
final int ALPHABET_SIZE = 26; // number of elements in alphabet
// declare variables
boolean finished = false; // whether or not to exit program
String text; // input string read from keyboard
int choice; // menu choice selected
int offset = 0; // caesar cipher offset
// declare and instantiate input objects
InputStreamReader reader = new InputStreamReader(System.in);
BufferedReader input = new BufferedReader(reader);
// Display program identification
printID();
// until the user selects the exit option, display the menu
// and respond to the choice
do
// Display menu of options
printMenu();
// Prompt user for an option and read input
text = getText(input, PROMPT_CHOICE);
// While selection is not valid, prompt for correct info
while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
!text.equals(EXIT_STR) && !text.equals(DECODE_STR))
text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
// convert choice to an integer
choice = new Integer(text).intValue();
// respond to the choice selected
switch(choice)
case SET:
// get the cipher value from the user and constrain to
// -25..0..25
offset = getInteger(input, PROMPT_CIPHER);
offset %= ALPHABET_SIZE;
break;
case ENCODE:
// get message to encode from user, and encode it using
// the current cipher value
text = getText(input, PROMPT_ENCODE);
text = encode(text, offset);
System.out.println("Encoded text is: " + text);
break;
case DECODE:
// get message to decode from user, and decode it using
// the current cipher value
text = getText(input, PROMPT_DECODE);
text = decode(text, offset);
System.out.println("Decoded text is: " + text);
break;
case EXIT:
// set exit flag to true
finished = true ;
break;
} // end of switch on choice
} while (!finished); // end of outer do loop
// Thank user
System.out.println("Thank you for using Cipher for all your" +
" code breaking and code making needs.");
}My source in code format...sorry guys :)
Cipher.java
This program encodes and decodes text strings using a cipher that
can be specified by the user.
import java.io.*;
public class Cipher
public static void printID()
// output program ID
System.out.println ("*********************");
System.out.println ("* Cipher *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* *");
System.out.println ("* CS 181-03 *");
System.out.println ("*********************");
public static void printMenu()
// output menu
System.out.println("\n\n****************************" +
"\n* 1. Set cipher code. *" +
"\n* 2. Encode text. *" +
"\n* 3. Decode coded text. *" +
"\n* 4. Exit the program *" +
"\n****************************");
public static String getText(BufferedReader input, String prompt)
throws IOException
// prompt the user and get their response
System.out.print(prompt);
return input.readLine();
public static int getInteger(BufferedReader input, String prompt)
throws IOException
// prompt and get response from user
String text = getText(input, prompt);
// convert it to an integer
return (new Integer(text).intValue());
public static String encode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String encoded = ""; // base for string to return
char letter; // letter being processed
// convert message to upper case
original = original.toUpperCase();
// process each character of the message
for (int index = 0; index < original.length(); index++)
// get the letter and determine whether or not to
// add the cipher value
letter = original.charAt(index);
if (letter >='A' && letter <= 'Z')
// is A-Z, so add offset
// determine whether result will be out of A-Z range
if ((letter + offset) > 'Z') // need to wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE + offset);
else
if ((letter + offset) < 'A') // need to wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE + offset);
else
letter = (char) (letter + offset);
// build encoded message string
encoded = encoded + letter;
return encoded;
public static String decode(String original, int offset)
// declare constants
final int ALPHABET_SIZE = 26; // used to wrap around A-Z
String decoded = ""; // base for string to return
char letter; // letter being processed
// make original message upper case
original = original.toUpperCase();
// process each letter of message
for (int index = 0; index < original.length(); index++)
// get letter and determine whether to subtract cipher value
letter = original.charAt(index);
if (letter >= 'A' && letter <= 'Z')
// is A-Z, so subtract cipher value
// determine whether result will be out of A-Z range
if ((letter - offset) < 'A') // wrap around to 'Z'
letter = (char)(letter + ALPHABET_SIZE - offset);
else
if ((letter - offset) > 'Z') // wrap around to 'A'
letter = (char)(letter - ALPHABET_SIZE - offset);
else
letter = (char) (letter - offset);
// build decoded message
decoded = decoded + letter;
return decoded;
// main controls flow throughout the program, presenting a
// menu of options the user.
public static void main (String[] args) throws IOException
// declare constants
final String PROMPT_CHOICE = "Enter your choice: ";
final String PROMPT_VALID = "\nYou must enter a number between 1" +
" and 4 to indicate your selection.\n";
final String PROMPT_CIPHER = "\nEnter the offset value for a caesar " +
"cipher: ";
final String PROMPT_ENCODE = "\nEnter the text to encode: ";
final String PROMPT_DECODE = "\nEnter the text to decode: ";
final String SET_STR = "1"; // selection of 1 at main menu
final String ENCODE_STR = "2"; // selection of 2 at main menu
final String DECODE_STR = "3"; // selection of 3 at main menu
final String EXIT_STR = "4"; // selection of 4 at main menu
final int SET = 1; // menu choice 1
final int ENCODE = 2; // menu choice 2
final int DECODE =3; // menu choice 4
final int EXIT = 4; // menu choice 3
final int ALPHABET_SIZE = 26; // number of elements in alphabet
// declare variables
boolean finished = false; // whether or not to exit program
String text; // input string read from keyboard
int choice; // menu choice selected
int offset = 0; // caesar cipher offset
// declare and instantiate input objects
InputStreamReader reader = new InputStreamReader(System.in);
BufferedReader input = new BufferedReader(reader);
// Display program identification
printID();
// until the user selects the exit option, display the menu
// and respond to the choice
do
// Display menu of options
printMenu();
// Prompt user for an option and read input
text = getText(input, PROMPT_CHOICE);
// While selection is not valid, prompt for correct info
while (!text.equals(SET_STR) && !text.equals(ENCODE_STR) &&
!text.equals(EXIT_STR) && !text.equals(DECODE_STR))
text = getText(input, PROMPT_VALID + PROMPT_CHOICE);
// convert choice to an integer
choice = new Integer(text).intValue();
// respond to the choice selected
switch(choice)
case SET:
// get the cipher value from the user and constrain to
// -25..0..25
offset = getInteger(input, PROMPT_CIPHER);
offset %= ALPHABET_SIZE;
break;
case ENCODE:
// get message to encode from user, and encode it using
// the current cipher value
text = getText(input, PROMPT_ENCODE);
text = encode(text, offset);
System.out.println("Encoded text is: " + text);
break;
case DECODE:
// get message to decode from user, and decode it using
// the current cipher value
text = getText(input, PROMPT_DECODE);
text = decode(text, offset);
System.out.println("Decoded text is: " + text);
break;
case EXIT:
// set exit flag to true
finished = true ;
break;
} // end of switch on choice
} while (!finished); // end of outer do loop
// Thank user
System.out.println("Thank you for using Cipher for all your" +
" code breaking and code making needs.");
} -
HT5843 How do I create a locked document for privacy?
How do I create a locked document for privacy?
With the document open, tap the tools icon (wrench) and select Set Password. this assumes you are using the most recent version of the iWorks app or apps in question.
-
Hi, both my husband and I have iphones synced to my apple id. It seems that we can't facetime due to this as it's like my email address is calling my email address! Is there anyway to fix this or will we need to create a new id for my husband's phone?
settings - facetime - remove the apple id, on your husband phone.
He should create his own id for imessage and facetime. -
Need to create a Z transaction for SE16
Hi All,
I have a requirement in which I need to create a Z transaction for SE16 and then restrict the access of that transaction to 3 tables and users cannot see other tables through this transaction. it would be fine even if this condition can be implemented on standard transaction(in SE16 with out creating a Z with the help of basis team).
I tried to copy the transaction and also the program (program name: SAPLSETB and screen 230 even this program is made a Z program)
but this is giving a short dump.
Please let me know if the process i am following is correct if not can you please suggest me a better one.
Thanks in advance.
Regards,
LRK.Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
TAB2 RADIOBUTTON GROUP R1,
TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
WHEN TAB1. TABNAME = 'BSID'.
WHEN TAB2. TABNAME = 'BSAD'.
WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
EXPORTING
TABLE_NAME = TABNAME
* ACTION = 'ANZE'
* WITHOUT_SUBMIT = ' '
* GENERATION_FORCED =
* NEW_SEL =
* NO_STRUCTURE_CHECK = ' '
* DATA_EXIT = ' '
* IMPORTING
* PROGNAME =
* TABLES
* SELTAB =
EXCEPTIONS
TABLE_IS_STRUCTURE = 1
TABLE_NOT_EXISTS = 2
DB_NOT_EXISTS = 3
NO_PERMISSION = 4
NO_CHANGE_ALLOWED = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to Create a Billing Document For SalesOrder
Hi Guys,
Any one please Explain me how to create a Billing Document for salesOrder. give me step by step procedure so i can easily understand the terms.Thanks in advance.
Thanks
Kiran.BHi Kiran,
Normally a billing doc is created after a sales order-->delivery.
U can create a sales order w.r.t a Contract or another sales order.
In your case, its possible only for sales Returns.
pass billing doc number to ORDER_HEADER_IN-REF_DOC in BAPI_SALESORDER_CREATEFROMDAT2.
Reward points if helpful
Regards,
Hemant -
Need to Create the STATUS Profile for Q-Info record
Hi Guys,
Basically in the Q-Info record we have status profiles like VN, SP, MP OM and MP NOM etc... Under this status profiles there are few staus profiles assigned to it, in the same way
I need to create the status profile for Q-Info record under the status profile MP NOM (Non Original Mfgr MP), so that when I am creating the Q-Info record I can select the status profile which is under the MP NOM.
Guys anyone can guide me to create the status profile in BS02.
Regards,
SMBS02--->Select the status say " QM_P_001" ->Copy As F6 - >Enter new name>enter.
Now chage the relevent data as per your requirement.
Maybe you are looking for
-
Any help would be greatly appreciated.
-
Time Machine can't copy my hard drive
Time Machine can't copy my hard drive, it says that it can't complete the safety copy because an error occured when files were copied to the safety copy. Does anyone recognise this problem? All I could find in System notifications about Time Machine
-
I lost my login pass and i do not have the cd to reset it, what should i do?
tell me what should i do plz
-
Hi All, While doing the GR, we are getting the error message as: No Commitment item entered in item 0002 NFCL 10013 But the GL has been created as a Commitment item. All other line items are getting posted to this account 10013 except this particular
-
Why the Report page language can not be in Chinese
Dear experts, My customers language is Chinese, but when I log on SRM 7.03, it shows Chinese except the report page. it is like this: while if I change to German, the report page can show German. I searched the discussions before and can not find the